HangZhou XiongMai Technology XM-JPLB1 Smart LED Colorful Bulb User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3158443
Application ID	AG7GBC8vr3rkH9YDXPfCuQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	30.09kB (376122 bits)
Date Submitted	2016-10-10 00:00:00
Date Available	2016-10-10 00:00:00
Creation Date	2016-09-27 16:03:29
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2016-09-27 16:03:29
Document Title	Microsoft Word - Smart Colorful LED Bulb User Manual.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	toby81818

Smart LED Colorful Bulb
Fast User Manual
HANGZHOU XIONGMAI TECHNOLOGY CO., LTD
Precautions
1. Please confirm whether the voltage meets the
requirements before using the product, or improper
voltage will damage the device and bring security risk.
2. Do not disassemble the product privately.
3. The device will generate heat in the work, please
avoid using in confined spaces, and make sure that
the air can circulate around the bulb in order to
dissipate heat.
4. In order to prevent burns, do not touch the device
after prolonged use.
Sp
pecificcations
 Mou
unt: E27
 Light Color: white + RGB fu
ull colorr
 Colo
or outpu
ut：16m
million colors
 Worrking Vo
oltage: AC
A 100—
—240V 50‐60Hz
 Pow
wer Conssumptio
on: 3W
 Life Expectaancy: 20
0,000 ho
ours
 Bodyy color: silver grey
 Size: 100*70*25mm
 Weigght: 175
5g
Prroductt intro
oductio
on
Lampsshade
SEET
W sign
WiFi
nal area
Lamp
ho
older
Lightt body
Tips one: screw the bulb
b into the
e lamps. Ensure the powe
er is
on;; turn on
n and off
ff the bulb at inte
ervals off 2 secon
nds. Afte
er 5
cyccles, it will restoree into deefault factory settting.
ess SET button
fo
or 6 secon
nds,
Tips two: use SEET pin to long‐pre
thee bulb wiill restoree into default facttory setting.
AP
PP Dow
wnload
Downlo
oad and install“XM
MSmartH
Home”
Tips one: Scan QR
Q code;
wo: Searcch “XMSm
martHom
me” in APP
A storee or Goo
ogle
Tips tw
Plaay, and do
ownload it.
Insstallatio
on
Screw the bulb
b into the lamp
ps and turn
on the pow
wer
switch.
No
otes: Afteer the bulb
is powered, the LED
D white light staarts
flasshing at the intterval off 1 second, it enters intto network
con
nfiguratio
on (LED white liight will always flash until finish
hing
nettwork co
onfiguratiion).
Please follow
th
he operaation of the
t “netw
work con
nfiguratio
on”
on the rightt.
Neetwork configuration
1. Open “X
XMSmarttHome”, click “lo
ocal devicce” at th
he right‐ttop
corner. (picture1)
2. Click “+”” on thee top righ
ht corne
er, and seelect devvice “Sm
mart
LED Colo
orful Bulb
b”. (pictu
ure2)
1
3. Click “auto con
nfiguratio
on (reco
ommend))”; selecct “confirm
operation
ns”, starttconfigurration. (p
picture3)
indicatorrs”and “o
4. Enter thee WiFi ro
outer passsword, and
a thenclick OK.. (picture
e 4)
heradar scanningg interfaace has appearedbulb iccon,
5. When th
click thee bulb ico
on,which
h means the device has b
been add
ded
successffully. (pictture 5)
4
I the configuratiion fails, please restore tthe product
Notes: If
into defaultt factory setting and
a repe
eat the above steeps until the
nfiguratio
on is don
ne successsfully.
con
AP
PP inteerfacee intro
oductio
on
Device
lisst
After
th
he device is added succcessfullyy, this iinterface
e is
theemain in
nterface. It can display multiplee devicees and live
preeview thee status of
o devicees.

Clicck the bulb to control on/off.

Lon
ng press th
he bulb intto the
Devvice Managgement.

Click the blank area to
t enter thee
bulb’s
homeepage.

Long press tthe blank area candragg sorting.
1. Color setttings
T interface has four seelectable
The
e themess: multicolor, white,
sceenes and
d dynam
mic. You can sele
ect diffeerent sceene lightting
efffects depending on
o the en
nvironme
ent.
2. Settings interfacee
Click
into sm
mart bulb settings interfface. You
u can maake
varioussettings and view relaated infformatio
on in this
interfacee.
Click
to enter
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly
approved by the party.
Responsible for compliance could void the user’s authority to operate this
equipment. (Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for
uncontrolled enviroment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
Directions:
It will renew timely for APP and device firmware, if
upgrades, please operate it online, as it’s not informed,
and the introduction is just referred.
Warranty Card
Product
Model
Name
Purchase
Distributor
Date
Causation
Trouble‐shooting
Situation
Customer
Customer
Name
Gender
Customer
Post
Phone
Code
Address
Warranty period: one year.
This warranty Card is only for our company’s products.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : toby81818
Create Date                     : 2016:09:27 16:03:29+08:00
Modify Date                     : 2016:09:27 16:03:29+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : toby81818
Title                           : Microsoft Word - Smart Colorful LED Bulb User Manual.docx
Creator Tool                    : PScript5.dll Version 5.2.2
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:db82fc0a-b2c6-4d05-bcfd-dbe8880534ca
Instance ID                     : uuid:1b852cee-1608-4840-bd35-168ce09cabb5
Page Count                      : 9

EXIF Metadata provided by EXIF.tools