Hangshi Technology HB205 Bluetooth Keyboard User Manual
Shenzhen Hangshi Technology Co., Ltd Bluetooth Keyboard
User Manual
User Manual for HB205
Packing content
• Bluetooth keyboard x1
• Charging cable x1
• User manual x1
Keyboard Specification
Bluetooth version
Bluetooth 3.0
Operating distance
10meters（no obstacle）
Modulation system
GFSK
Lithium battery
capacity
250mAh
Working voltage
3.7V
Uninterrupted working
time
100 hours
Standby time
100 天
Charge time
2 hours
Lithium battery life
3 years
dimensions
255*181.5*6mm
Net weight
335g
Material
Aluminum+ABS
Indicator
① Power indicator（green）/Charging indicator（red）/Fully charge indicator
（green）
② Bluetooth pairing indicator（blue）/Caps Lock indicator（green）/Battery
power indicator（red）/low battery indicator（red）
①② Reset indicator（green）
③ Micro charging port
④ Magnetic power on/off location（2 locations）
Pairing Steps
1.Power on ：Place keyboard cover bottom attract to one of the magnetic
locations,power indicator turns on 5 seconds,then off.
2.Keyboard enters pairing mode：Press Fn and C keys at the same time,bluetooth
pairing indicator flashes blue.
3.Finish pairing：Turn on your device’s bluetooth setting,device searches the
keyboard pairing name”Bluetooth 3.0 Keyboard” automatically,click the pairing
name,bluetooth pairing indicator finishes flashing.Connected successfully.
4.Choose correct language：This keyboard is US layout,please change the device
language to US.
5.
iOS9/10: control+Space
（Example：If device is iOS 10 system,press “control”key always,and click Space key
at the same time.Each click can change to next language.
Shortcuts
keys
function
keys
function
home
Volume down
Brightness
decrease
Volume up
Brightness
increase
lock
search
delete
Select all
Fn+
Bluetooth pairing
copy
Fn+
Print screen
paste
Fn+
Virtual keyboard
cut
Fn+
Battery power
display
Previous track
Fn+
Page head
Play/pause
Fn+
Page end
Next track
Fn+
Line head
mute
Fn+
Line end
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1)This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
RF Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 20 centimeters between the radiator and your body.