Hangshi Technology HW159 2.4G Keyboard User Manual HW159

Shenzhen Hangshi Technology Co., Ltd 2.4G Keyboard HW159

15_HW159 UserMan r1

2.4G Keyboard User Manual Package Contents 1 x Numeric Keypad 1 x USB Charging Cable 1 x User Manual 1 x Warranty Card
SpeBluModOpeDimLithUniStanChaLith No1. T2. Nadapfunc ThFor Hom ecificationetooth Specdel Numbererating Rangmension hium Batteryinterrupted Wnd-by Time arge Time hium Batteryote : Try to pair thNum lock keptive). For Action normae functionuser of iOSme ns cification r ge y Capacity Work Time y Life hem again iey press opeAndroid useally n of pairinS and Mac, PgUp2.4GHW15< 10 m131.9x100 mA40 hou30 day1 hours3 yearsf pairing operation is oner, the Numng with iOthe followinEndPgD 9 m / 32.8 ft x88.8x19.72Ah urs ys s s peration is fnly applicabm lock indicaOS and Mng letters haDnInsDe2 mm / 5.19 failed. ble for windator will notMac ave no funcel x 3.5 x 0.7dows OS ( At light up,bution . 8 in Apple OS is ut still not
Power Saving Mode The keypad will enter sleep mode when idle for 30 minutes. To re-activate it, press any key and wait for 3 seconds. Charge it 1. This numeric keypad builds with 100mAh rechargeable lithium battery. Please get it charged before first usage. 2. If the LED indicator on the top flashes in red color, please charge the keypad in time via supplied micro USB charging cable. (USB Charger is not included) Troubleshooting If you are unable to connect the keypad to your tablet, please try the following: 1. Starting with a full charge on both devices ensures that process won’t be interrupted by a low battery. 2. Make sure that the keypad is within the effective operation distance of 33 feet (10 m). FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable condition without restriction.

Navigation menu