Hangzhou Gubei Electronics Technology 3301-SBSL Wi-Fi Module User Manual
Hangzhou Gubei Electronics Technology Co.,Ltd Wi-Fi Module Users Manual
Contents
- 1. Users Manual
- 2. User manual_1
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2928640 |
| Application ID | K69NzAGyO6yMqgmm3B9HjQ== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 82.49kB (1031067 bits) |
| Date Submitted | 2016-03-14 00:00:00 |
| Date Available | 2016-03-14 00:00:00 |
| Creation Date | 2017-11-20 13:44:43 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-20 13:44:43 |
| Document Title | Users Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | Shu Fen |
BiTrend™ EssentialSeriesWi-Fi Module Datasheet WT1SBSL Hangzhou Gubei Electronics Technology Co., Ltd. Copyright Information The information contained in this document is the proprietary information of Hangzhou Gubei Electronics Technology Co., Ltd. (hereinafter referred as BroadLink). Further, no portion of this document may be altered or edited in any form or by any meanswithout the prior written consent of BroadLink, the copyrightholder. Further BroadLink reserves the right to make modifications, additions anddeletions to this document due to typographical errors, inaccurate information, orimprovements to products mentioned in the document at any time and without notice. Such changes will, nevertheless be incorporated into new editions of this document or published as errata sheet. Version History V 1.0.0 22/01/2016 1stissue of preliminary document 1www.ibroadlink.com Table of Contents 1. Introduction ................................................................................................................................. 3 1.1 Overview ............................................................................................................................ 3 1.2 Applications....................................................................................................................... 4 1.3 Key Features ...................................................................................................................... 4 2. Product Overview ....................................................................................................................... 5 2.1 Product Picture ................................................................................................................. 5 3. Electrical Characteristics............................................................................................................. 6 3.1 Absolute Maximum Ratings – Voltage & Current ........................................................ 6 3.2Current consumption ........................................................................................................ 7 3.3 Absolute maximum ratings – Temperature ................................................................... 7 3.4Absolute maximum ratings – ESD ................................................................................... 7 4. RF Characteristics ........................................................................................................................ 8 4.1Basic Characteristics .......................................................................................................... 8 4.2 IEEE802.11b Mode ............................................................................................................ 8 4.3 IEEE802.11g Mode ............................................................................................................ 9 4.4 IEEE802.11n 20Mhz Bandwidth Mode ......................................................................... 10 4.5 IEEE802.11n 40Mhz Bandwidth Mode ......................................................................... 11 5. Mechanical Characteristics ...................................................................................................... 12 6. Module Interfaces..................................................................................................................... 13 6.1 PIN Layout ....................................................................................................................... 13 6.2 PIN Definitions ................................................................................................................ 14 7. Reference Design ...................................................................................................................... 15 8.1 Antenna Selection .......................................................................................................... 16 8.2 Minimizing Radio Interference ..................................................................................... 17 8.3 Specification of On-Board Antenna ............................................................................. 18 Appendix A Glossary Quentin respible ............................................................................... 19 Appendix B Reference paper Quentin respible .................................................................. 21 Contact Us ..................................................................................................................................... 22 2www.ibroadlink.com 1. Introduction 1.1 Overview BiTrend™ Essentialis the industrial leading 2.4Ghz 802.11 b/g/n embedded Wi-Fi module which delivers unmatched performance and codeless development in a compact package, providing a quick, easy and cost effective way for developers and manufacturers to add Wi-Fi connectivity for home automation, lighting control, energy efficiency and other IOT applications. BiTrend™ Essential family combines a 2.4Ghz 802.11 b/g/n radio transceiver with a 32-bit microprocessor and embedded with MAC, baseband processing and optimized Wi-Fi network stack. It is an ideal solution for developers and manufacturers with limited RF and embedded programming expertise as it significantly reduces RF design time and removes the burden of testing and certification. Benefitted from BroadLink’s turn-key solution, BiTrend™ Essential is an ideal solution for developers with limited Wi-Fi or RF expertise or for those seeking faster time to market. It reduces RF design time and removes the burden of testing and certification. BiTrend™ Essential is fully compliant with IEEE 802.11 b/g/n standard and certified with CE, FCC and RoHS. BiTrend™ Essential is a highly integrated Wi-Fi SoC(system on Chip) single chip, which supportsIEEE802.11b/g/n single stream, providing GPIO for intelligent control, and UART interfaces for device communication. BiTrend™ Essential has 8Mbits flash and integrates power amplifier, low noise amplifier, and RF switch to reduce the module size and RF design capability required. And also integrate power manage unit for single 3.3V power source for cost effective design. BiTrend™ Essential embedded 32-bit RISC MCU for 802.11b/g/n drivers, supplicant, TCP/IP protocol stack, and networking applications, can be operated in station mode and softAP mode. The WT1SBSL is an ideal solution for embedded device to enable networking service with minimized design effort. RF_IN RF receiver Baseband RF_OUTP RF_OUTN RF transmitter MAC / Packet buffer / security engine UART System control UART GPIO/LED Figure 1. WT1SBSL block diagram 3www.ibroadlink.com 1.2 Applications Smart home appliances Remote Control Medical/Health Care Network consumer devices 1.3 Key Features a． Support IEEE802.11b/g/n Frequency Range 2.412 GHz - 2. 462GHz Wi-Fi Standard IEEE 802.11 b/g/n Transmitter Power 802.11b:17dBm±0.5 802.11g:18dBm±0.5 802.11n:16dBm±0.5 MIN Receiver Sensitivity 802.11b<-78dBm 802.11g<-68dBm 802.11n<-66dBm Data rate 11M@802.11b, 54M@802.11g, MCS7@802.11n Security Encryption Standard：WEP/WEPA/WPA2 EncryptionAlgorithm：WEP64/WEP128/TKIP/AES Wi-Fi Modes STA/AP b． Support UARTtransparent transfer c． Support STA\AP d． Patent SmartConfig™ technology e． Support IPv4, TCP/UDP/ DNS/DHCP f． PCB printed antenna Antenna type PCB printed ANT g． Power source: 3.3V h． Peripherals: 1*UART 5*GPIO 1*RESET i． Dimension 31mm*17.7mm*3.6mm j． ESD: 2KV k． Absolute maximum ratings 4www.ibroadlink.com Symbol Description Min. Max. Units Ts Storage temperature -40 125 ℃ TAMBIENT Ambient Temperature -10 70 ℃ Vdd Supply voltage 3.63 Vio Voltage on IO pin -0.28 3.63 VESD HBM(human body model) 2000 2. Product Overview 2.1 Product Picture 5www.ibroadlink.com 3. Electrical Characteristics 3.1 Absolute Maximum Ratings – Voltage & Current Using products above the absolute maximum ratings may cause permanent damage to the device. These are maximum ratings only and functional operation of the device at these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect the reliability of the device. Symbol Rating MIN TYP MAX Unit VDD33 3.3V Supply Voltage 2.97 3.3 3.63 Symbol Ratings Max IVDD Total current into VDD power lines (source) 90 IVSS Total current out of VSS ground lines (sink) 90 Output current sunk by any I/O and control pin 10 Output current source by any I/Os and control pin 10 IIO Unit mA 6www.ibroadlink.com 3.2Current consumption Performance Symbol Condition IRF IDLE mode IRF RX Active, HT40, MCS7 TYP Unit 80 mA 151 mA IRF TX HT40, MCS7 @ 15dBm pulse 210 mA IRF TX CCK 11Mbps @ 18dBm pulse 250 mA Note: All result is measured at the antenna port and VDD33 is 3.3V 3.3 Absolute maximum ratings – Temperature Rati Symbol Max Unit TSTG Storagetemperature –40 to+125 ℃ TA Workingtemperature -10 to+70 ℃ Humidity Non condensing, relative humidity 90% RH 3.4Absolute maximum ratings – ESD Symbol VESD(HBM) Ratings Conditions Class Max Unit Electrostatic discharge voltage (human body model) TA = +25 °C conforming to JESD22-A114 2000 7www.ibroadlink.com 4. RF Characteristics 4.1Basic Characteristics Specification Item OperatingFrequency 2.412 GHz - 2.462 GHz Wi-FiStandard IEEE 802.11b/g/n 11b: DBPSK, DQPSK,CCK for DSSS ModulationType 11g: BPSK, QPSK, 16QAM, 64QAM for OFDM 11n: MCS0~7,OFDM Data Rates Antennatype PCBprintedANT 4.2 IEEE802.11b Mode Item Specification ModulationType DSSS/CCK Frequencyrange 2412MHz~2462MHz Channel CH1 toCH11 Datarate 1,2,5.5,11Mbps TX Characteristics Min Typical Max. Unit Transmitter Output Power 17 11bTarget Power Frequency Error -20 dBm +20 ppm Constellation Error( peak EVM)@ target power 1~11Mbps RX Characteristics Min -17 -10 Typical Max. Unit 95 -83 dBm Minimum Input Level Sensitivity 1Mbps (FER≦8%) 8www.ibroadlink.com -20 -93 -80 dBm 5.5Mbps (FER≦8%) -91 -79 dBm 11Mbps (FER≦8%) -89 -76 dBm 2Mbps (FER≦8%) Maximum Input Level (FER≦8%) -10 dBm 4.3 IEEE802.11g Mode Item Specification ModulationType OFDM Frequencyrange 2412MHz~2462MHz Channel CH1 toCH11 Datarate 6,9,12,18,24,36,48,54Mbps TX Characteristics Min Typical Max. Unit Transmitter Output Power 18 11gTarget Power +20 ppm 6Mbps -5 dB 9Mbps -8 dB 12Mbps -10 dB 18Mbps -13 dB 24Mbps -16 dB 36Mbps -19 dB 48Mbp -22 dB 54Mbps -25 dB @11MHz 20 dBr @20MHz -28 dBr @30MHz -40 dBr Typical Max. Unit -90 -83 dBm Frequency Error -20 dBm Constellation Error( peak EVM)@ target power Transmit spectrum mask RX Characteristics Min Minimum Input Level Sensitivity 6Mbps 9www.ibroadlink.com - -88 -80 dBm 12Mbps -86 -79 dBm 18Mbps -85 -76 dBm 24Mbps -82 dBm 36Mbps -79 dBm 48Mbps -75 dBm 54Mbps -72 dBm 9Mbps Maximum Input Level (FER≦10%) -20 dBm 4.4 IEEE802.11n 20Mhz Bandwidth Mode Item Specification ModulationType OFDM Frequencyrange 2412MHz~2462MHz Channel CH1 toCH11 Datarate MCS0/1/2/3/4/5/6/7 TX Characteristics Min Typical Max. Unit Transmitter Output Power 16 11n HT20 Target Power +20 ppm MCS0 -5 dB MCS1 -10 dB MCS2 -13 dB MCS3 -16 dB MCS4 -19 dB MCS5 -22 dB MCS6 -25 dB MCS7 -28 dB @11MHz -20 dBr @20MHz -28 dBr @30MHz -40 dBr Frequency Error -20 dBm Constellation Error( peak EVM)@ target power Transmit spectrum mask 10www.ibroadlink.com RX Characteristics Min Typical Max. Unit Minimum Input Level Sensitivity -89 dBm -86 dBm MCS2 -84 dBm MCS3 -82 dBm MCS4 -78 dBm MCS5 -74 dBm MCS6 -72 dBm MCS7 -69 dBm MCS0 MCS1 Maximum Input Level (FER≦10%) -30 dBm 4.5 IEEE802.11n 40Mhz Bandwidth Mode Item Specification ModulationType OFDM Frequencyrange 2422MHz~2452MHz Channel CH3 toCH9 Datarate MCS0/1/2/3/4/5/6/7 TX Characteristics Min Typical Max. Unit Transmitter Output Power 16 11n HT40 Target Power +20 ppm MCS0 -5 dB MCS1 -10 dB MCS2 -13 dB MCS3 -16 dB MCS4 -19 dB MCS5 -22 dB MCS6 -25 dB Frequency Error -20 dBm Constellation Error( peak EVM)@ target power 11www.ibroadlink.com -28 dB @11MHz -20 dBr @20MHz -28 dBr @30MHz -40 dBr Max. Unit MCS7 Transmit spectrum mask RX Characteristics Min Typical Minimum Input Level Sensitivity -86 dBm -83 dBm MCS2 -81 dBm MCS3 -79 dBm MCS4 -75 dBm MCS5 -71 dBm MCS6 -69 dBm MCS7 -66 dBm MCS0 MCS1 Maximum Input Level (FER≦10%) -30 dBm 5. Mechanical Characteristics Figure2.WT1SBSLtopview(Metricunits) 12www.ibroadlink.com Figure3. 3301-WT1SBSLtopview(Metricunits) 6. Module Interfaces 6.1 PIN Layout WT1SBSL has one group of pins2X7. The layout of PINs are shown in the figure below. Figure6.WT1SBSLpin-out 13www.ibroadlink.com 6.2 PIN Definitions PIN Assignment PIN PIN NAME NOTE Pin1 GND Pin2 VCC 3.3V Pin3 RST_N Module software reset,Available at low level Pin4 UART_TX Pin5 UART_RX UART Only for Passthrough Pin6 GPIO3 Pin7 GPIO4 Feed watchdog Pin8 GPIO4 Feed watchdog Pin9 GPIO3 Pin10 GPIO2 Pin11 GPIO1 Module software reset, Available at High level Pin12 GPIO0 Usually use as Wi-Fi LED Pin13 VCC 3.3V Pin14 GND Type: 14www.ibroadlink.com 7. Reference Design Peripheral MCU WIFI MODULE In addition to the standard serial port，the peripheral MCU also need to provide two GPIO pins to connect with the GPIO4 pin and the RST pin of the WIFI module respectively,when the WIFI module works properly,the GPIO4 pin will keep outputting message of dog feeding,if the peripheral MCU did not receive the message,the module will reset and restart through pulling down the RST pin by the other GPIO pin. If the peripheral MCU uses power source of 5V,it needs to add a level switching circuit in the connection of the serial port and the related circuit. The module needs a large current about 250mA when transmitting data,please ensure that the power source can provide sufficient current. 15www.ibroadlink.com 8. AntennaCharacteristics 8.1 Antenna Selection The WT1SBSL supports on-board PCB printed antenna.When the Operating Frequencyis between 2.4G~2.5GHz, S11 of antenna port is less than-10dB and peak gainis 1.46dBi. Figure 7. Antenna radiation pattern simulation Figure 8. Antenna port S11simulation curve In practical use, WT1SBSL is welded on user’s boardand value of S11 has some changes. 16www.ibroadlink.com 8.2 Minimizing Radio Interference When integrating the Wi-Fi module with on board PCB printed antenna, make sure the three points below: 1. The area under the antenna end of the module should be keep clear of metallic components, connectors, vias, traces and other materials that can interfere with the radio signal. 2. The area around the antenna end the module protrudes at least 10mm from the mother board PCB and any metal enclosure. 3. When planning PCB layout, it is recommended that user places the antenna of Wi-Fi module as close as possible to the edge of boarder to ensure the good performance of antenna, which is shown in the picture below. 17www.ibroadlink.com 8.3 Specification of On-Board Antenna OperatingFrequency 2.4G~2.5GHz VSWR(max) Peak Gain 1.46dBi AntennaType PIFA 18www.ibroadlink.com Appendix A Glossary Quentin respible ADC AES ANT AP BPSK Analog-to -Digital Converter Advanced Encryption Standard Antenna Wireless Access Point Binary Phase Shift Keying DBPSK DC Differential binary phase shift keying Direct Current CCK CDM Complementary Code Keying Charge Device Model DHCP Dynamic Host Configuration Protocol CMOS Complementary Metal Oxide Semiconductor DNS DQPSK DSSS DTIM EMSP ESD EVM FCC FER GND GPIO HBM IEEE IO IOT IPv4 LED LVTTL MAC MCS MCU MIMO MSL NC NRST OFDM OSC PCB PIFA QPSK RC RF Determination of non-significance Differential quadrature phase shift keying Demand assigned signaling and switching subsystem Digital Transmission Interface Module Enhanced Modular Signal Processor Electrostatic Discharge Error Vector Magnitude Federal Communications Commission Floating Error Ground General Purpose Input/Output Human body model Institute of Electrical and Electrionics Engineers Input/Output Individual operation test Internet Protocol version 4 Light-emitting diode Low Voltage Transistor Transistor Logic Medium Access Control layer Modulation and coding scheme Microcontroller Unit Multiple-Input Multiple-Output Multilayer Switching Protocol Numerical Control Negative Reset Orthogonal Frequency Division Multiplexing Oscillator Printed Circuit Board Planar inverted F antenna Quadrature Phase Shift Keyin Resistance- capacitance Radio Frequency 19www.ibroadlink.com RISC RoHS RX SDIO SoC SPDT SPI STA TCP TKIP TX IP UART UDP UFL VSWR WEP WEPA WEP64 WEP128 WPA2 XTAL QAM 802.11 b/g/n Reduced Instruction Set Computer Restriction of Hazardous Substances Receiver Serial Digital Input/Output System on Chip Single-Pole Double-Throw Serial Peripheral Interface Spanning Tree Algorithm Transfer Control Protocol Temporal Key Integrity Protocol Transmitter Internet Protocol Universal Asynchronous Receiver/Transmitter User Datagram Protocol a miniature coaxial RF connector for high-frequency signals manufactured by Hirose Electric Group Voltage Standing Wave Ratio Wired Equivalent Privacy Welded Electronic Packaging Association 64 bit Wired Equivalent Privacy 128 bit Wired Equivalent Privacy Wi-Fi Protected Access 2 External Crystal Oscillator Quadrature Amplitude Modulation The IEEE 802.11 b/g/n 20www.ibroadlink.com Appendix B Reference paper Quentin respible [1] IEEE 802.11b/g/n- published IEEE 802.11-2007wireless networking standard and published IEEE 802.11-2012 standard for Information technology - Clause 19 of the publishedIEEE 802.11-2007 standard, and Clause 19 of the published IEEE 802.11-2012 standard. 21www.ibroadlink.com Contact Us Hangzhou Gubei Electronics Technology Co., Ltd. Room 106, Building 1, No. 611 Jianghong Road, Binjiang, Hangzhou, Zhejiang, P.R.China T: +86-571-85159281 F: +86-571-86631817 E: intl@broadlink.com.cn W: www.ibroadlink.com.cn This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The OEM or final integrator must ensure that FCC labeling requirements are met. This includes an additional label on the outside of the final product housing with the following contents: Company Name Model:WT1SBSL,3301-SBSL FCC ID:2ACDZ-3301-SBSL This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To satisfy FCC RF Exposure requirements for this transmission devices, a separation distance of 20cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended. The antenna(s) used for this transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number： (A) If using a permanently affixed label, the modular transmitter must be labeled with its own FCC identification number, and, if the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: 2ACDZ-3301-SBSL” or “Contains FCC ID:2ACDZ-3301-SBSL.” Any similar wording that expresses the same meaning may be used. The Granteemay either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization 22www.ibroadlink.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : Shu Fen Create Date : 2016:02:23 11:23:38+08:00 Modify Date : 2016:03:14 08:59:51-07:00 Has XFA : No Language : zh-CN Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Format : application/pdf Creator : Shu Fen Creator Tool : Microsoft® Word 2010 Metadata Date : 2016:03:14 08:59:51-07:00 Producer : Microsoft® Word 2010 Document ID : uuid:d2ca0039-22a3-4312-94ad-31b71d8463c0 Instance ID : uuid:8f514d93-8bbc-459d-bec2-5a51d5d333cb Page Count : 23EXIF Metadata provided by EXIF.tools