Hangzhou Hikvision Digital Technology 71VWNVR Network Video Recorder User Manual

Hangzhou Hikvision Digital Technology Co., Ltd. Network Video Recorder

User Manual

Quick Operation Guide of Network Video Recorder
Quick Start Guide
UD.6L0202B1711A01
Quick Operation Guide of Network Video Recorder
TABLE OF CONTENTS
NVR Pre-Installation .........................................................................................................1
NVR Installation ...............................................................................................................1
Main Features ..................................................................................................................2
Typical Application ...........................................................................................................3
Front Panel .......................................................................................................................4
Rear Panel ........................................................................................................................5
Accessing by Web Browser ..............................................................................................7
Logging In ......................................................................................................................7
Modifying Password ......................................................................................................9
Adding IP Cameras ........................................................................................................9
Live View .....................................................................................................................11
Recording ....................................................................................................................14
Playback ......................................................................................................................17
Creating Wireless Network .........................................................................................20
Configuring WAN Settings .......................................................................................21
Configuring WIFI Settings ........................................................................................21
Menu Operation .............................................................................................................23
Menu Structure ...........................................................................................................23
Startup and Shutdown ................................................................................................24
Adding IP Cameras ......................................................................................................26
Live View .....................................................................................................................30
Recording ....................................................................................................................31
Instant Recording ....................................................................................................31
All-day Recording ....................................................................................................32
Playback ......................................................................................................................32
Creating Wireless Network .........................................................................................36
Configuring WAN Settings .......................................................................................36
Configuring WIFI Settings ........................................................................................37
Quick Operation Guide of Network Video Recorder
Regulatory information
FCC information
FCC compliance: Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the user’s authority to
operate the equipment.
Note: This product has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
product generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this product does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between
the radiator and your body
Quick Operation Guide of Network Video Recorder
FCC conditions
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may
cause undesired operation.
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and
comply therefore with the applicable harmonized European standards listed under the
Low Voltage Directive 2006/95/EC, the R&TTE Directive 1999/5/EC, the RoHS
Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of
as unsorted municipal waste in the European Union. For proper recycling, return this
product to your local supplier upon the purchase of equivalent new equipment, or dispose
of it at designated collection points. For more information see: www.recyclethis.info.
Quick Operation Guide of Network Video Recorder
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of
as unsorted municipal waste in the European Union. See the product documentation for
specific battery information. The battery is marked with this symbol, which may include
lettering to indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection point. For more
information see: www.recyclethis.info.
Quick Operation Guide of Network Video Recorder
Trademarks and Registered Trademarks
Windows and Windows mark are trademarks or registered trademarks of
Microsoft Corporation in the United States and/or other countries.
HDMI, HDMI mark and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
The products contained in this manual are authorized by HDMI Licensing LLC
with the use right of the HDMI technology.
VGA is the trademark of IBM.
UPnPTM is a certification mark of the UPnPTM Implementers Corporation.
Other names of companies and product contained in this manual may be
trademarks or registered trademarks of their respective owners.
Quick Operation Guide of Network Video Recorder
1
Thank you for purchasing our product. If there is any question or request, please do not
hesitate to contact dealer.
This manual is applicable to the model DS-7108NI-E1/V/W.
NVR Pre-Installation
The NVR is highly advanced surveillance equipment that should be installed with care.
Please take into consideration the following precautionary steps before installation of the
NVR.
Keep all liquids away from the NVR.
Install the NVR in a well-ventilated and dust-free area.
Ensure environmental conditions meet factory specifications.
NVR Installation
During the installation of the NVR:
Use brackets for rack mounting.
Ensure there is ample room for cables.
When routing cables, ensure that the bend radius of the cables are no less than
five times than its diameter.
Allow at least 2cm (≈0.75-inch) of space between racks mounted devices.
Environmental temperature should be within the range of 0 ºC ~ +40 ºC (+32 ºF ~
+104 ºF).
Environmental humidity should be within the range of 10% ~ 90%.
Lay the device in a proper way, as shown below.
Quick Operation Guide of Network Video Recorder
2
Main Features
Support establishing wired and wireless network instead of an wireless router.
Support SADP automatically searching and adding active IP cameras.
A build-in noiseless fan supports automatically adjusting speed.
Provide an installed 2.5-inch HDD when delivery.
Quick Operation Guide of Network Video Recorder
3
Typical Application
LAN
3G/4G
UTP Cable
NVR
WIFI Network
Camera
WIFI Network
Camera
Network
Camera
LAN
WAN
HDMI Cable
Base Station
HDMI Displayer
Computer
Phone & laptop
Phone & laptop
Quick Operation Guide of Network Video Recorder
4
Front Panel
The front panel of NVR is shown below:
Quick Operation Guide of Network Video Recorder
5
Rear Panel
The rear panel of NVR is shown below:
Quick Operation Guide of Network Video Recorder
6
No.
Name
Function Description
1
LAN Interface
(1 ~ 3)
3 RJ-45 10 /100Mbps network interfaces for LAN
(Local Area Networks).
2
WAN Interface
1 RJ-45 10 /100 Mbps network interface for WAN
(Wide Area Networks).
3
USB Interface
Universal Serial Bus (USB) ports for additional devices
such as USB mouse and USB writer.
4
HDMI
HDMI video output connector.
5
POWER
12VDC Power supply.
Quick Operation Guide of Network Video Recorder
7
Accessing by Web Browser
You can get access to the device via web browser.
Before you start:
Establish the connection between your computer and the NVR via wired or wireless
network.
Wired network: connect the Ethernet port of computer to the LAN interface of
NVR. And configure the IP address of computer on the principle that the network
segment is the same with NVR, that is 192.168.254.×××.
Wireless network: the default SSID and password of wireless network created by
NVR is in the tag of device.
Logging In
Steps:
1. Open web browser, input the IP address of the device and then press Enter. The
login interface appears.
Quick Operation Guide of Network Video Recorder
8
2. Input the User Name and Password, and click the Login button.
3. When you log in for the first time, the system will remind you to install the
Plug-in control. After the installation, you can configure and manage the device
remotely.
The default IP address is 192.168.254.100.
The default user name is admin, and password is 12345.
You may use one of the following listed web browsers: Internet Explorer 6.0,
Internet Explorer 7.0, Internet Explorer 8.0, Internet Explorer 9.0, Internet
Explorer 10.0, Apple Safari, Mozilla Firefox, and Google Chrome.
Quick Operation Guide of Network Video Recorder
9
The supported resolutions are 1024*768 and above.
Modifying Password
To ensure your account security, it is highly recommended to modify the default
password.
Steps:
1. Enter User Management interface.
Configuration > Remote Configuration > User Management
2. Click to select the admin user.
3. Click Modify button to enter modify user interface.
4. Edit the password and click OK to save the new one.
Adding IP Cameras
You should add and configure the online IP cameras to enable the live view and recording
function.
Quick Operation Guide of Network Video Recorder
10
Hikvision WIFI IP camera with default user name and password will be added
automatically. IP cameras of other manufacturers should be configured as below.
Before you start:
Establish the connection between IP camera and the NVR via wired or wireless network.
For details, you can refer to the before you start section in Accessing by Web Browser.
Steps:
1. Enter IP Camera Interface
Configuration > Remote Configuration > Camera Management
Quick Operation Guide of Network Video Recorder
11
2. Click Add to enter configure IP Camera information.
3. Input IP Camera Address, Protocol, Management Port, User Name, Password and
Confirm.
4. Click OK to add the IP Camera.
Live View
You can view the live image of the added cameras in the live view interface.
Quick Operation Guide of Network Video Recorder
12
Interface Introduction
No.
Name
1
Channel List
2
Live View
Window
3
Play Control
Bar
4
PTZ Control
5
Video
Parameters
Configuration
Quick Operation Guide of Network Video Recorder
13
Start Live View
Steps:
1. In the live view window, select a playing window by clicking the mouse.
2. Double click a camera from the device list to start the live view.
3. You can click the button on the toolbar to start the live view of all cameras
on the device list.
4. Refer to the following table for the description of buttons on the live view
window:
Icon
Description
Icon
Description
Select
window-division
mode
/
Open/close audio
/
Start/stop all live
view
/
Start/stop
two-way Audio
Capture pictures in
the live view mode
Adjust volume
Quick Operation Guide of Network Video Recorder
14
/
Start/stop all
recording
/
Enable/disable
digital zoom
/
Previous/next page
Full screen
Recording
Before you start
Make sure the HDD or network disk has been initialized for the first time to use.
Two recording types can be configured: Manual and Scheduled. The following section
introduces the configuration of scheduled recording.
Steps:
1. Enter Record Schedule settings interface.
Remote Configuration > Camera Settings > Record Schedule
2. Select the camera to configure the record schedule.
3. Check the checkbox of Enable Schedule to enable recording schedule.
Quick Operation Guide of Network Video Recorder
15
4. Choose the day in a week to configure scheduled recording.
5. Click Edit to edit record schedule.
Quick Operation Guide of Network Video Recorder
16
1) Configure All Day or Customize Record:
If you want to configure the all-day recording, please check the All Day
checkbox.
If you want to record in different time sections, check the Customize
checkbox. Set the Start Time and End Time.
Up to 8 segments can be configured and each segment cannot be overlapped.
Quick Operation Guide of Network Video Recorder
17
2) Select a Record Type. The record type can be Continuous, Motion, Alarm,
Motion & Alarm, Motion | Alarm and VCA.
3) Check the checkbox of Select All and click Copy to copy settings of this
day to the whole week. You can also check any of the checkboxes before
the date and click Copy.
4) Click OK to save the settings and exit the Edit Schedule interface.
6. Click Advanced to configure advanced record parameters.
7. Click Save to activate the above settings.
Playback
You can playback the record files in HDD in following interface.
Quick Operation Guide of Network Video Recorder
18
1
2
5
6
34
Interface Introduction
No.
Name
Description
1
Channel List
Displays the list of channels and the playing status of
Quick Operation Guide of Network Video Recorder
19
each channel.
2
Playback
Window
Displays the image of channel.
3
Play Control
Bar
Play control operations are supported.
4
Time Line
Displays the time bar and the records marked with
different colors.
5
Playback
Status
Displays the playback status, including channel
number and playback speed.
6
Calendar
You can select the date to play.
Start Playback
Steps:
1. Click Playback on the menu bar to enter playback interface.
2. Click the camera from the device list for playback.
3. Select the date from the calendar and click Search.
4. Click the Play button to play the video file searched on the current date.
5. Use the buttons on the toolbar to operate in playback mode.
Button
Description
Button
Description
/
Play/Pause
Stop
Quick Operation Guide of Network Video Recorder
20
Button
Description
Button
Description
Slow down
Speed up
Play by single frame
Capture
Stop all playback
Download
/
Video clip
/
Open/Close audio
Full screen
Reverse playback
6. You can drag the progress bar with the mouse to locate the exact playback point.
You can also input the time in the textbox and click
button to locate the playback point.
The color of the video on the progress bar stands for the different video types.
Creating Wireless Network
The device provides you with dialing, wired and wireless network features, such as a
wireless router. You can access to internet via NVR instead of a router.
Quick Operation Guide of Network Video Recorder
21
Configuring WAN Settings
Steps:
1. Enter WAN settings interface.
Configuration > Remote Configuration > Network Settings > WAN
2. Select the Access Type as PPPOE.
3. Input User Name, Password and Confirm.
4. Click Save to dial up.
Configuring WIFI Settings
1. Enter WAN settings interface.
Quick Operation Guide of Network Video Recorder
22
Configuration > Remote Configuration > Network Settings > WIFI
2. Input SSID (the name of WIFI) in the text field.
3. Select the Security Mode and input Encryption Type and Key.
4. Optionally, you can click Router Advanced Configuration to configure advanced
settings.
5. Click Save to create WIFI.
Quick Operation Guide of Network Video Recorder
23
Menu Operation
You can operate the NVR locally via displayer and mouse connected to NVR.
Menu Structure
Menu
Export Manual HDD Camera Maintenance Shutdown
Record Configuration
Playback
Normal Record General Schedule Camera General System Info Logout
Event Advanced Parameters OSD Network Log
Information Shutdown
Advanced Image Import/Export Reboot
Holiday PTZ Upgrade
Motion Live View Default
Privacy
Mask Exceptions Net Detect
Video
Tampering User
Video Loss
HDD Detect
WIFI
Alarm
Alarm
VCA
Quick Operation Guide of Network Video Recorder
24
Startup and Shutdown
Proper startup and shutdown procedures are crucial to expanding the life of the NVR.
To start your NVR:
Step:
Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended
that an Uninterruptible Power Supply (UPS) be used in conjunction with the device.
After the device starting up, the wizard will guide you through the initial settings,
including modifying password, date and time settings, network settings, HDD initializing,
and recording.
To shut down the NVR:
Steps:
1. Enter the Shutdown menu.
Menu > Shutdown
Quick Operation Guide of Network Video Recorder
25
2. Select the Shutdown button.
3. Click the Yes button.
4. Unplug the power supply on the rear panel when the attention pops up.
Quick Operation Guide of Network Video Recorder
26
Adding IP Cameras
You should add and configure the online IP cameras to enable the live view and recording
function.
Before you start:
Establish the connection between IP camera and the NVR via wired or wireless network.
For details, you can refer to the before you start section in Accessing by Web Browser.
Steps:
1. Right-click the mouse when you in the live view mode to show the right-click
menu.
Quick Operation Guide of Network Video Recorder
27
2. Select Add IP Camera in the pop-up menu to enter the IP Camera Management
interface.
3. The online cameras with same network segment will be displayed in the camera
list. Click the button to add the camera.
Quick Operation Guide of Network Video Recorder
28
The added camera is marked in white while the camera has not been added is
marked in yellow.
Explanation of the icons
Icon
Explanation
Icon
Explanation
Edit basic parameters of the
camera
Add the detected IP camera.
The camera is connected.
The camera is disconnected;
you can click the icon to get
the exception information of
camera.
Delete the IP camera
Advanced settings of the
camera.
4. Add other IP cameras.
1) Click the Custom Adding button to pop up the Add IP Camera (Custom)
interface.
Quick Operation Guide of Network Video Recorder
29
2) You can edit the IP address, protocol, management port, and other
information of the IP camera to be added.
3) Click Add to add the camera.
4) (For the encoders with multiple channels only) check the checkbox of
Channel No. in the pop-up window, as shown in the following figure, and
click OK to finish adding.
Quick Operation Guide of Network Video Recorder
30
Live View
Some icons are provided on screen in Live View mode to indicate different camera status.
These icons include:
Live View Icons
In the live view mode, there are icons at the upper-right corner of the screen for each
channel, showing the status of the record and alarm in the channel, so that you can find
problems as soon as possible.
Quick Operation Guide of Network Video Recorder
31
Alarm (video loss, tampering, motion detection or sensor alarm)
Record (manual record, continuous record, motion detection or alarm triggered
record)
Alarm & Record
Event/Exception (event and exception information, appears at the lower-left corner
of the screen.)
Recording
Purpose:
Two kinds of record types are introduced in the following section, including Instant
Record and All-day Record. And for other record types, you may refer to the user manual
for detailed information.
After rebooting all the manual records enabled are canceled.
Instant Recording
On the live view window of each channel, there is a quick setting toolbar which shows
on the bottom of the window when you click on it.
Quick Operation Guide of Network Video Recorder
32
Click the icon to enable the record, and the icon turns to . And click icon
to disable the record, then the icon turns to .
All-day Recording
Steps:
1. On the live view window, right lick the window and move the cursor to the Start
Recording option, and select Continuous Record or Motion Detection Record
on your demand.
2. And click the Yes button in the popup Attention message box to confirm the
settings.
Then all the channels will start to record in the selected mode.
Playback
Play back the record files of a specific channel in the live view menu. Channel switch is
supported.
Option 1:
Choose a channel under live view using the mouse and click the button in the
shortcut operation menu.
Quick Operation Guide of Network Video Recorder
33
Only record files recorded during the past five minutes on this channel will be played
back.
Quick Operation Guide of Network Video Recorder
34
Option 2:
Steps:
1. Enter the Playback menu.
Right click a channel in live view mode and select Playback from the menu.
Record files of the selected channel will be played back.
2. Playback management.
The toolbar in the bottom part of Playback interface can be used to control
Quick Operation Guide of Network Video Recorder
35
playing process.
Just check the channel or channels if you want to switch playback to another
channel or execute simultaneous playback of multiple channels.
Quick Operation Guide of Network Video Recorder
36
Creating Wireless Network
The device provides you with dialing, wired network and WIFI features, such as a router.
You can access to internet via the device instead of a router.
Configuring WAN Settings
Steps:
1. Enter WAN configuration interface.
Menu > Configuration > WIFI
2. Select the Connection Mode as PPP Dialing.
3. Input Account and Password in the text field.
4. Click Apply to dial up.
Quick Operation Guide of Network Video Recorder
37
Configuring WIFI Settings
Steps:
1. Enter WIFI configuration interface.
Menu > Configuration > WIFI
2. Click the WIFI tab to enter WIFI configuration interface.
3. Input SSID (the name of WIFI) in the text field.
4. Select Working Channel, Security Type and Encryption Type in the dropdown list.
Input Network Security Key and Default Gateway in the text field.
5. Click Apply to set up a wireless network.
0300071041104

Navigation menu