Hangzhou Hikvision Digital Technology H2TS03 Handheld Observational Thermal Monocular User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3624673
Application ID	aRrCHQp3HYGKXpt8u5JeWQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	97.7kB (1221210 bits)
Date Submitted	2017-11-01 00:00:00
Date Available	2017-11-01 00:00:00
Creation Date	2017-10-13 14:34:21
Producing Software	Microsoft® Word 2016
Document Lastmod	2017-10-13 14:34:21
Document Title	User manual
Document Creator	Microsoft® Word 2016
Document Author:	Frida Yan

Handheld
Thermal
Monocular
User Manual
UD06410B
0100001070725
COPYRIGHT © 2017 Hikvision. ALL RIGHTS RESERVED
About This Manual
COPYRIGHT ©2017 Hangzhou Hikvision Digital Technology
Co., Ltd.
ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures,
graphs are the properties of Hangzhou Hikvision Digital Technology
Co., Ltd. or its subsidiaries (hereinafter referred to be “Hikvision”).
This user manual (hereinafter referred to be “the Manual”) cannot be
reproduced, changed, translated, or distributed, partially or wholly,
by any means, without the prior written permission of Hikvision.
Unless otherwise stipulated, Hikvision does not make any warranties,
guarantees or representations, express or implied, regarding to the
Manual.
This Manual is applicable to Handheld Thermal Monocular.
The Manual includes instructions for using and managing the product.
Pictures, charts, images and all other information hereinafter are for
description and explanation only. The information contained in the
Manual is subject to change, without notice, due to firmware updates
or other reasons. Please find the latest version in the company
website (http://overseas.hikvision.com/en/).
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
and other Hikvision’s trademarks and logos are the
properties of Hikvision in various jurisdictions. Other trademarks and
logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE
LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH
ALL FAULTS AND ERRORS, AND HIKVISION MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, MERCHANTABILITY,
SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN
NO EVENT WILL HIKVISION, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT
DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR
LOSS OF DATA OR DOCUMENTATION, IN CONNECTION
WITH THE USE OF THIS PRODUCT, EVEN IF HIKVISION HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS,
THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN
RISKS. HIKVISION SHALL NOT TAKE ANY
RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER
ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR
OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION
WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.
SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE
CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE
THAT YOUR USE CONFORMS THE APPLICABLE LAW.
HIKVISION SHALL NOT BE LIABLE IN THE EVENT THAT
THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THIS
MANUAL AND THE APPLICABLE LAW, THE LATER
PREVAILS.
Regulatory Information
FCC Information
FCC compliance: This equipment has been tested and found to
comply with the limits for a digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own
expense.
FCC Conditions
COPYRIGHT © 2017 Hikvision. ALL RIGHTS RESERVED
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Cet appareil est conforme à la section 15 des réglementations de la
FCC. Le fonctionnement de l’appareil est sujetaux deux conditions
suivantes :
(1) cet appareil ne doit pas provoquer d’interférences néfastes, et
(2) cet appareil doit tolérer les interférences reçues, y compris celles
qui risquent de provoquer un fonctionnement indésirable.
Note: This product has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This product
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this product does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radioexempts de licence. L'exploitation est
autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Under Industry Canada regulations, this radio transmitter may only
operate using an antenna of a type and maximum (or lesser) gain
approved for the transmitter by Industry Canada. To reduce potential
radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.)
is not more than that necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent
émetteur radio peut
fonctionner avec une antenne d'un type et d'un gain maximal (ou
inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but
de réduire les risques de brouillage radioélectrique à l'intention des
autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte
que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse
pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.
EU Conformity Statement
This product and, if applicable, the supplied
accessories are marked with “CE” and comply
therefore with the applicable harmonized
European standards listed under the Radio Equipment Directive
2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive
2011/65/EU.
2012/19/EU (WEEE directive): Products marked
with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For
proper recycling, return this product to your local
supplier upon the purchase of equivalent new
equipment, or dispose of it at designated collection
points. For more information see:
www.recyclethis.info.
2006/66/EC (battery directive): This product
contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union.
See the product documentation for specific battery
information. The battery is marked with this
symbol, which may include lettering to indicate
cadmium (Cd), lead (Pb), or mercury (Hg). For
proper recycling, return the battery to your
supplier or to a designated collection point. For more information see:
www.recyclethis.info.
After the laboratory measurement, the Max SAR value is 0.192W/kg
for 2.4G Band which satisfies the RF exposure requirement
WARNINGS AND CAUTIONS
 All the electronic operation should be strictly compliance with
the electrical safety regulations, fire prevention regulations and
other related regulations in your local region.
 Please use the power adapter, which is provided by normal
company. The power consumption cannot be less than the
required value.
 Do not connect several devices to one power adapter as adapter
overload may cause over-heat or fire hazard.
 Do not drop the device or subject it to physical shock, and do not
expose it to high electromagnetism radiation. Avoid the device
installation on vibrations surface or places subject to shock
(ignorance can cause equipment damage).
 Do not place the device in extremely hot (refer to the
specification of the device for the detailed operating
temperature), cold, dusty or damp locations, and do not expose it
to high electromagnetic radiation.
 The device cover for indoor use should be kept from rain and
moisture.
 Exposing the device to direct sun light, low ventilation or heat
source such as heater or radiator is forbidden (ignorance can
cause fire danger).
 Do not aim the device at the sun or extra bright places. A
blooming or smear may occur otherwise (which is not a
malfunction however), and affecting the endurance of sensor at
the same time.
For long-term storage of the battery, make sure you fully charge it
every half year, to ensure the battery quality. Otherwise, you may
damage the battery.
SAVE THIS MANUAL FOR FUTURE REFERENCE
1 Introduction
1.1 Box Content
USB Cable
(×1)
Manual (×1)
Non-dust
Cloth (×1)
Protective
Bag (×1)
Handheld Thermal
Monocular (×1)
Neck
Belt(×1)
1.2 Overview
The handheld thermal monocular is a handheld
thermal camera with functions of observation,
hot spot mark, distance measurement, Wi-Fi
hot spot, and so on. The high-sensitivity
built-in IR detector provides you with clear
view even in total darkness.
1.3 Features






High performance chip, and DDE
(Digital Detail Enhancement) technique
1024 × 768 Resolution OLED display
Built-in rechargeable Li-ion battery
Up to five hours continuous running
(GPS function and Wi-Fi hot spot
function off)
USB Cable
Small in size and light in weight
1.4 Functions
Distance Measurement:
The device realizes distance measurement
function after marking the top and bottom of
target, and input the target height.
Hot Spot Mark:
The device detects and marks the hot spot of
highest temperature.
Wi-Fi Hot Spot:
Device can capture snapshots, record videos,
and set parameters via APP after being
connected to your phone.
GPS Function:
The device can be located with GPS system.
Mode Switch:
Device supports pallet switch and distance
measurement.
Storage:
Built-in memory module supports video
recording/snapshot capturing.
Digital Zoom:
Device supports 1× and 2× digital zoom.
LED light:
LED light supplement makes the device a torch
in the wild field.
2 Appearance
2.1 Dimensions
Take the figure below for the dimensions of the
handheld thermal monocular.
189.4mm (7.46″)
73.7mm (2.90″)
65.9mm (2.59″)
51.9mm (2.04″)
57.6mm (2.27″)
2.2 Buttons and Interfaces
Take the figure below for the buttons and
interfaces description of handheld thermal
monocular.
LED Indicator
Buttons
LED Light
Power
Press: LED Light Supplement
On/Off
Hold: Power On/Off
MODE
MOD
Press: Switch Pallet
Hold: Distance Measure On/Off
Capture
Press: Capture Snapshot
Hold: Start/Stop Record Video
Menu
Press: Shutter Release
Hold: Menu Operation
Zoom ±
Press: Digital Zoom
Hold: Reserved
Eyepiece
USB Interface
Focus Knob
Tripod Screw
Lens Cover
Lens Cover
Cover the lens when you are not
using the monocular.
LED Indicator
When the LED indicator is on: the
device is activating, and after the
activation, the LED indicator turns
off and the device is on.
Sight Adjust Knob
Slide the sight adjust knob to
adjust the view according to your
degree of myopia.
USB Interface
Charge the battery and export
videos/snapshots with the USB
cable.
Note: For detailed operations of the menu, refer
to Menu Operation Section.
3 Basic Operations
3.1 Charging the Monocular
Note: Please charge the monocular with the
delivered USB cable and power adapter. The
charging temperature should be 0 °C to
45 °C (32 °F to 113 °F).
Steps:
1. Lift the USB cover.
USB Interface
Battery Status Indicator
Plug in the USB cable and connect the
other terminal into the power adapter.
3. Plug the power adapter to the power
source.
When the monocular is turned on, the OSD
(on-screen display) shows the battery status.
When you see the Low Battery status, charge
the monocular and ensure it’s working
properly.
Battery LED Indicator Status
2.
●
Red Flash
Error occurred.
Solid Red
Battery is properly charged.
●
Solid Green
Battery is fully charged.
●
Off
Battery is not charged.
3.2 Power On and Off
Power On
Hold the POWER button for four seconds and
the LED indicator in the front turns green.
After the device is powered on, the indicator
keeps green.
Power LED Indicator
Refer to the figure below for the main view of
the monocular.
Wi-Fi Hot Spot Digital Zoom
Storage
Battery
Power Off
When the monocular is turned on, hold the
POWER button for four seconds to power off
the device.
3.3 Thermal View Observation
Steps:
1. Power on the monocular.
2. Hold the monocular and make sure the
eyepiece covers your eye.
3.
Slide the sight adjust knob to adjust the
diopter until the OSD text or image is
clear.
Sight Adjust Knob
4.
Note: You must perform the sight
adjustment before any further use of the
monocular.
Point the monocular towards the target of
the view.
3.4 Basic Operation
Connect the thermal monocular to your PC
with USB cable, you can export the recorded
videos and captured snapshots.
Steps:
Hold the
button to enter the menu
and select the icon
2. Press
and the icon turns to
and
the Wi-Fi hot spot function is disabled.
3. Connect the thermal monocular to your
PC with USB cable, you can see a
detected removable disk.
Notes:

When you connect the device to
PC for the first time, it installs the
drive program automatically.

When you connect the device to
PC, the device displays images, but
functions such as recording,
capturing and Wi-Fi hot spot are
disabled.
File Export
Steps:
1. Connect the thermal monocular to your
PC with USB cable and open the detected
disk.
2. Enter DCIM>100EZVIZ to view the
videos and snapshots.
Select and copy the videos to PC
and play the file with the player.
Select and copy the snapshots to PC
and view the files.
3. Disconnect the device from your PC.
Upgrade
Steps:
1. Connect the thermal monocular to your
PC with USB cable and open the detected
disk.
2. Copy the upgrade file and paste it to the
root directory of the device.
3. Disconnect the device from your PC.
4. Reboot the monocular and the device
upgrades automatically. The upgrading
process will be displayed in the main
interface.
1.
4 Main Function
4.1 Menu Operation
When the monocular is turned on, hold the
button
for three seconds to display the
OSD menu.
OK
Press the button
to move the cursor up, and
press the button
to move the cursor down. Press
the button
to confirm.
Press
to display or hide the OSD
information.
Press
to enable/disable hot spot
mark (marking the spot of highest
temperature).
Press
to enable or disable the Wi-Fi
hot spot. Connect your phone to the
monocular
via
the
Wi-Fi
and
record/capture with App.
Press
interface.
to exit the menu operation
Press
to
enter
distance
measurement mode. For details, refer to
Section 0.
Press
function.
to enable or disable the GPS
Press
to adjust the brightness. The
icons on the left indicate: high
Brightness, medium Brightness, and low
Brightness.
Press
to view the version number
and serial number.
Press
to restore all parameters to
default settings.
Palette Settings
Under the same scene, you can select different palettes to
see the scene in different effects.
White Hot:
The hot part is light-colored in
view.
Black Hot:
The hot part is black-colored in
view.
Fusion:
The hot part is yellow-colored
and cold part is purple-colored
in view.
Red Hot:
The hot part is red-colored in
view.
Brightness Adjusting
In white hot mode, you can adjust the brightness as
to adjust the image darker and darker.
In black hot mode, the brightness of the image turns in the
opposite way.
4.2 Distance Measurement
Before you start:
In the view node, you can hold the
button to enter the distance measurement mode.
Or, you can hold the
button to enter the
menu and select
to enter the distance
measurement mode.
Purpose:
You can mark the top and bottom of the target
in the distance to calculate the distance in
between.
Steps:
1. Enter the distance measurement mode.
You can refer to before you start part
above.
2. Define the target height.
a)
Press
to enter the height
setting interface.
b)
Select target from Deer, Wolf,
Bear, and Custom.
c)
Press
and
to select the
target height and press
to
confirm (for Deer, Wolf, or Bear).
d)
Press
and
to select the
target height, the available height
ranges from 0.3 m to 9.9 m (for
Custom).
3. Set the top of the target.
a)
Move the monocular slightly to
place the
mark above the
target top.
b)
Press
to confirm.
4.
Set the bottom of the target.
a)
Move the monocular slightly to
place the
mark below the
target bottom.
b)
Press
to confirm.
The distance between you and the target
will display on the upper left corner of the
live view interface.
Note: Enter the distance measurement
interface, press
to view the
measured distance.
4.3 Hot Spot Mark
In the menu, select
and press
to
enable/disable hot spot mark (marking the spot
of highest temperature).
When the hot spot mark is enabled, the
mark displays in the spot of the highest
temperature. When the scene changes, the
mark moves.
4.4 Record/Capture
Video Recording
In the view mode, hold the
button for
three seconds, and the monocular starts to
record. In the upper left corner, the recording
time displays.
After recording the video, hold the
button
for three seconds again, and the monocular
stops recording.
Snapshot Capturing
In the view mode, press the
button, the
live view freezes for one second, and the
snapshot is captured.
4.5 Digital Zoom
Press the
button in the view mode, the
live view will switch between 1× digital zoom
and 2× digital zoom.
4.6 Shutter Release
In the view mode, press the
release the shutter once.
button once to
4.7 Others
LED Light Supplement
Press the
button to enable/disable the
LED light supplement.
Wi-Fi Hot Spot
Connect your phone to the Wi-Fi hot spot of
the monocular, you can configure the
parameters and realize functions of the device.
Steps:
1. Search the “EZVIZ SPORTS” on App
Store (iOS System) or Google Play TM
(Android System) to download and install
the app.
2. Turn on the WLAN and connect to the
Wi-Fi.
Wi-Fi Name: HIK-IPTS Serial No.
Wi-Fi Password: Serial No.
3. Open the APP and set parameters.
Select Video and tap record key to
record videos.
Select Photo and tap capture key to
capture snapshot.
Tap on
to enter the Camera
Settings interface and edit the Wi-Fi
hot spot name and password.
5 FAQ
Q:
A:
Q:
A:
Q:
A:
Q:
A:
Q:
A:
1.
2.
3.
Q:
A:
Q:
A:
1.
2.
3.
The charge indicator flashes
improperly.
Examine whether the device is charged
with standard power adapter and the
charging temperature is 0 °C to 45 °C
(32 °F to 113 °F).
Device power indicator is off.
Examine whether the device is
off-battery.
The image of the monocular is not
clear.
Perform the sight adjustment referring
to section 3.3.
Wi-Fi is not found.
Examine whether the Wi-Fi function is
turned on. If not, go to OSD menu and
turn on Wi-Fi.
Capturing or recording fails.
Examine the items below:
Whether the device is connected to
your PC and disabled the capturing and
recording.
Whether the storage space is full.
Whether the device is low-battery.
There is no GPS signal.
Examine the using environment. If the
device receives no signal in indoor
environment, please go to outdoor
spaces. It takes about 10 min to power
on and search for the signal.
The PC cannot identify the monocular.
Examine the items below:
Whether the device is connected to
your PC with standard USB cable.
If you use other USB cables, make sure
the cable length is no longer than 1m.
Whether the Wi-Fi function is turned
on. If so, go to OSD menu and turn off
Wi-Fi.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 15
Language                        : zh-CN
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Word 2016
Creator                         : Frida Yan
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2017:10:13 14:34:21+08:00
Modify Date                     : 2017:10:13 14:34:21+08:00
Document ID                     : uuid:4AA820A1-42E9-48AE-B26B-EB0D29963958
Instance ID                     : uuid:4AA820A1-42E9-48AE-B26B-EB0D29963958
Author                          : Frida Yan

EXIF Metadata provided by EXIF.tools