Hangzhou Meari Technology 304010001 Radio Camera User Manual Quick install guide of vSpeed 1

Download:
Mirror Download [FCC.gov]
Document ID	3107975
Application ID	Al8TAQbIQRrcZstwHzAD+g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	136.97kB (1712138 bits)
Date Submitted	2016-08-23 00:00:00
Date Available	2016-08-23 00:00:00
Creation Date	2016-07-19 14:14:11
Producing Software	Corel PDF Engine Version 17.1.0.572
Document Lastmod	2016-08-13 13:11:30
Document Title	Quick install guide of vSpeed 1.cdr
Document Creator	CorelDRAW X7
Document Author:	slf

WiFi
Day & Night
Network PT Camera
Speed
Quick Install Guide
What's in the box
Camera
Power adapter
Bracket
Adhesive tape
I/M
1
Install the App
Two ways to download
1. Visit the App Store, Google Play to search WeEye
and download the free app on your smartphone.
2. Scan the following QR code to download.
Install attention:
For Android, it might pop up the security warning of getting
location permission. Just click Allow to continue.
Register / Log in
For the new user, you should register an account via
your Email.
Step 1: Start the App and tap Sign Up at the bottom of
the page.
Step 2: Key in your email address and password in
the corresponding fields.
Step 3: Click on OK when it is be done.
2
Set-up your camera
1. Set with Smart Wi-Fi
Step 1: Powered on the camera firstly, then wait for the
voice of Do-do, after few seconds the red light
will blinked.
Step 2: Go onto the Camera page, click on the icon +
and choose WiFi Add.
Step 3: Enter the password of the Wi-Fi router that your
smartphone connected. Then tap the Next.
Step 4: Please back to camera list to check the real play
after the light changed to blue.
Camera light instruction
Red light on: network abnormal
Red light blinked: waiting for monitor
Blue light on: network normal
Blue light blinked: AP mode
If it failed to set-up the network, please reset the camera
and try once more, meanwhile please double check the
following issues :
1) Check your wireless password.
2) Please ensure your Wi-Fi network broadcasts at
2.4GHz(802.11 b/g/n)
3) Move camera closer to your router. Camera out of
Wi-Fi range cannot connect to network.
4) Restart your Wi-Fi router.
Reset: press Button (shown as the picture) with a Pin until hear
a voice of Dodo and the camera red light is on.
2. Set Wi-Fi manually
Step 1: Press the Reset Button for 1 second, after a
while the blue light blinked.
Step 2: Click on Manual config and follow the instruc-tions there to set-up.
3. Set with ethernet cable
Step 1: Connect your camera to router with an ethernet
cable.
Step 2: Click on the + and tap the QR Code Add.
Step 3: Scan the QR code (on the back of camera) to
add the camera.
3
Start live play
Select the camera in the camera list to preview.
Pan/Tilt: slide right/left/up/down direction to check
almost 360 degree view.
4
Device sharing
Share the device to your friend
Click on the Friends in the home page, Select the friend
which be shared, and then tap the icon Unshare to be
done.
Request to share a device
Search the camera in the LAN by adding the camera,
and tap the icon Unshare to wait for the approval.
Attention: when access to device share from others, you
cannot change its settings.
5
Motion detection
Just set by clicking the icon
on the up-right of the
device and select the motion detection for low/medium
/high standard.
6
Playback
You can playback the video and check the moment
what you missed after it is inserted the SD card.
Slide the timeline to view the image as you like.
Information to user
Please pay more attention to the following restrictive
clauses or exemption of liability.
1. We shall not bear any responsibility for you and the third
persons personal injury or property loss if the product is
interrupted or terminated caused by the following reasons:
Not strictly in accordance with the correct setup and usage;
In order to safeguard the interests of the state or the public;
Force majeure; By your own or the third party's problem
(including but not limited to use the third party's product,
software or components etc.)
2. We have never been to warranty by any express or implied
this product suitable for the special purpose or application.
The product is not intended for using in medical, safety
equipment or other application may lead to the danger of
life or personal injury. Any loss or liability caused by the
above purposes will be bear by yourself.
3. We are not responsible for any indirect, incidental, special
or punitive damages claim and any data or files missing.
To the maximum extent permitted, our compensation
liability does not exceed the payment amount what
you purchased
Technical Support
when you have any question, please go to
http://www.ppstrong.com for web support. You
can also E-Mail to support@ppstrong.com for
help.
Hangzhou PPStrong Technology Co., Ltd
Add: No.91, Chutian Road, Binjiang,Hangzhou
Tel: +86-0571-56565099
Fax: +86-0571-56565100
Website: www.ppstrong.com
Email: info@ppstrong.com
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.

Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used
for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must
not be collocated or operating in conjunction with any other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 17
Create Date                     : 2016:07:19 14:14:11+08:00
Modify Date                     : 2016:08:13 13:11:30+08:00
Producer                        : Corel PDF Engine Version 17.1.0.572
Author                          : slf
Creator                         : CorelDRAW X7
Title                           : Quick install guide of vSpeed 1.cdr

EXIF Metadata provided by EXIF.tools