Hans Turck and KG TNLRQ80L800 RFID Reader User Manual Annex To

Hans Turck GmbH & Co. KG RFID Reader Annex To

Contents

Annex To User Manual

read/write headTNLR-Q80L800-H1147Edition • 2015-08-27T10:30:45+02:001 / 1 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. 0208 4952-0 ñ Fax 0208 4952-264 ñ more@turck.com ñ www.turck.comType code TNLR-Q80L800-H1147Ident no. 7030522Mounting conditions non-flushAmbient temperature -25…+70 °COperating voltage 19.2…28.8VDCData transfer inductive couplingOperating frequency 13.56 MHzRadio communication and protocol standards ISO 15693Output function 4-wire, read/writeConstruction rectangular, Q80L800Dimensions 800x 80x 25mmHousing material plastic, PBT, blackMaterial active area plastic, BlackConnection male, M12Vibration resistance 55 Hz (1 mm)Shock resistance 30 g (11 ms)IP Rating IP67Power-on indication LED greenDiagnostic display Functional description of yellow range-restrict-ed LED: If the read/write head is suppliedwith voltage, it briefly checks to see whetherits resonance frequency is affected by sur-rounding metal. If this is the case, the reso-nant circuit off-tunes its frequency to reachagain the (optimum) resonance frequency.However, this is only possible within a cer-tain range. If too much metal is in the envi-ronment, the read/write head cannot re-tuneor the surrounding metal takes too much en-ergy from the field and due to the reducedrange the communication between the read/write head and the data carrier is cut off (theorange range-restricted-LED lights up). If theLED is off, this does not mean conversely,that no reduction in range occurs. The lit LEDis rather an indication of too much metal inthe environment and a greatly reduced range(about 50% less).Packaged quantity 1■For roller conveyors■The approach direction of the data car-rier can be transversal as well as longi-tudinal to the read/write head.■Rectangular, 80 x 800 mm, height 25mm■Active face on top■Plastic, PBT-GF30-V0■Powered and operated only via BL identinterface module■Male M12 x 1, only for use with BL identextension cableConnectors …/S2503Connectors …/S2500Connectors …/S2501Functional principleThe HF read/write heads operating at a fre-quency of 13.56 MHz form a transmissionzone the size of which (0…500 mm) varies,depending on the combination of read/writehead and data carrier.The read/write distances mentioned here on-ly represent standard values measured underlaboratory conditions.The read/write distances of the data carriersfor mounting in metal TW-R**-M(MF) were de-termined in metal.Attainable distances may vary by up to 30 %due to component tolerances, mounting con-ditions, ambient conditions and material quali-ties (especially when mounted in metal)Testing of the application under real operat-ing conditions is therefore essential, especial-ly with read/write on-the-fly!
TypeIdent-No.7030522Qty1TNLR-Q80L800-H11471615HWarning:Hazardous voltage can cause electrical shock and burns.Disconnect power before proceeding with any work on this equipment.Made in GermanyHans Turck GmbH & Co. KG · Witzlebenstraße 7 · 45472 Mülheim/Ruhr · GermanyPhone +49 208 49 52-0 · Fax +49 208 49 52-264 · more@turck.com · www.turck.com24 VDC

Navigation menu