Hansol LCD B15DF LCD Monitor User Manual users manual

Hansol LCD Inc. LCD Monitor users manual

users manual

Download: Hansol LCD B15DF LCD Monitor User Manual users manual
Mirror Download [FCC.gov]Hansol LCD B15DF LCD Monitor User Manual users manual
Document ID255337
Application IDTlqoRrFu4ct26TbNmqskXQ==
Document Descriptionusers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize126.64kB (1583048 bits)
Date Submitted2002-07-10 00:00:00
Date Available2002-07-09 00:00:00
Creation Date2002-07-02 18:34:05
Producing SoftwareAcrobat 4.0 Scan Plug-in for Windows
Document Lastmod2002-07-02 15:38:23
Document Titleusers manual
Document CreatorAcrobat 4.0 Scan Plug-in for Windows

INFORMATION TO USER :
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. ‘
These limits are designed to provide reasonable protection adainst harmful
interference in a residential installation.This equipment generates. uses and can
radiate radio frequency energy end,ii not installed and used in accordance with
the instructions, may cause harmful interference to radio corn‘munications.
However. there is no guarantee that interterence will not occur in a particular
installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by determinedlby turning the
equipment off and on, the user is encouraged to try to crrent the interference by
one or more of the tilowtng measures:
1. FteorientJFteIocate the receiving antenna.
2. Increase the separation between the equipment and receivert
3. Connect the equipment into an outlet on a circuit difference
from that to which the recerver is connected.
4. Consult the dealer or an experienced radio/T V technician lor help.
- Shielded interiace cable has to be used to ensure product compliance.
CAUTION : Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment
Table of Contents
Pans ...... ...... ....... .. .......... 3
Connectionto Computer ................................................ 4
Therangectcomrot Angie ------
Installing MonitorDriver ......
Name and Function of Front ............................................. 8
Power Management Feature .......................................... 10
Adjusfing OSD - ----- - ---------- .- ......................... 11
Stanfield Signal Table ....... . .......... . ................................ 17
Specification ............................................................... 13
Tmubleshooting ------- -- .......... .................................. . 19
Warning ....................... . ......................... ... ................. 21
Good Posture Guide
0 Place the monitor to lace the user and than adjust the monitor angle.
0 Take a break (for about 10 minutes) at every hour during the work with monitori
0 Relay to the lollowing figure to take the correct poslure. ‘
. Look doWn the monitor
below the horizon.
0 Adjust lite monitor to
prevent‘rel‘lection.
. Relax shoulders and arms.
and sit back on the chain
A Adjust the monitor stand
to acquire required angle.
o Maintain the arms horizontally
and plaoe hands $0th on
the keyboard
o Keep tee! flat on the ground.
Parts
Signal Cable
Usel‘s Manual I
" Warranty Card
LCD Monitor
fl
AC Power Cable
Installation Diskette
12V-DC Adapter
Connection to Computer
iiiiiiiiiiiiiiiii iiiiiiiii
vi a iiiiiiiiiii
—> (3 Computer cable ‘
® 12V DC connection
termlnal ’ For PC
e-@
<—
> For Macintosh
ig_
1. Use 220 V or 110 VA (Free Voltage) -
2. Connect monitor and computer via computer cable (Sesifigure ®)
3. Power on the monitor and computer.
4, Connection is finished,
The range
V How to Adjust the St
A Fowvard 4‘
Installing Monitor Driver
1. Insert the Diskette to the Floppy Disketle driver.
2. Double»c|ick “Installlexe'.
3. Select the modeI(H5§0) and click "OK“ bulton.
44 Selecl lnl file, and then click "OK" button.
5. Click “Exit“ button to close lhe installation.
1. Insert lhe Diskene to the Floppy Diskette driven
2 Click ‘My Computer and follow the procedure below.
(D (chk 'Conlrcl Panel. (2 Click Display. CD dick 'Se|fings',
(9 Click Marmot ®Cli0k ‘Changeu‘. 0 ("flat 'Ne)fl>’.
-)
W Click “Display: ls! ol all...'.
a; Ollck News.
_>
03) Salad the dtlvevand click ‘OK'. @ CIlCK ‘Nexv'
-’
0 OWN“; e» Click'finish'.
3. Select "Exit" If the monllor model is changed. and (hen reboot the Wlndowsl
Name and Function of; Front
t .
MENU BUTTON
SELECT I AUTO BUTTON - BUT‘TON
POWER eu‘rron
tPowutndlcatmg m);
0 Power button
Power button is located in the lower center of the Front Bezel.
You can push the button to tum onlotf the power.
9 Power Indicating LED
[f the green LED around the power switch tums into blinking amber,
it indicates the monitor is in power saving mode.
0 On Screen Display (OSD) Function Button
080 buttons on the front of bezel perform the following functions.
0 MENU : Press this button to display menus.
0 SELECT! AUTO : Press this button, when 050 is not displayed, to perform \
automatic setting
When OSD is displayed, Vou can select icons.
0 POWER : Power button.
0 -/+ : By pressing these button when OSD is displayed, Vou can move cursor into
the menus which you want.
After press the SELECT button, you can change gauge level or
select sub menus.
Power Management Feature
When not in use for a long time, the monitor ‘
automatically reduces its power consumption, meeting power saving
standards of EPA and NUTEK l
The monitor' 13 equipped with a power saving circuit that i
confirms to the world-standard Display Power Manager Signalling
(DPMS) mode of Video Electronics Standard Association (VESAt
The power management feature requires that the video card of the
computer should support DPMS lunction,
"Status' ~‘ Cotorof LED Power Consumption
Normal Green Normal PoWer
DPMS mode Amber Blinkin
(2 second interva?) 5 W or Below
Adjusting OSD
MENU uh — + d» SELECT -> — +
1. Press the Menu button.
1 Use - ,+ to move Brightness ICON.
3. Use SELECT button to select It
At Use - ,+ to adjust the brightness,
MENU ~> — + -> SELECT ->- — +
1. Press the Menu button,
2. Use —,+ to move Conlrast ICON.
3. Use SELECT button to select It.
4. Use - _+ to adjust the contrast
MENU —> — + -P— SELECT-b — +
L Press the Menu button.
2, Us. - ,+ to move H-Posillen ICON.
3, Us. SELECT button to select tt.
4. Use — ,+ Io adjust display left or rlght.
19
v,
osition
MENU -> — + a» SELECT » — +
1. Press the Menu button, I
2. Use — ,+ to move V»Position ICON.
3. Use SELECT button to select it.
4. Use - j to adlust display upwaru or downward.
MENU -> — + -> SE‘LECT ‘b— — +
1. Press the Menu button. I
2. Use — ,+ to move Clock ICON. :
8. Use SELECT button to select it.
4. It Auto-cnlig Iunction tails to remove Video notes.
Use - or + to rsmoveyenlml nolse.
(Adjusting clock phase ls requwed after the
adjustment ol dodc)
MENU -> — + -> séLEcr -> _ +
1. Press the Menu button.
2. Use — ,f to move Clock Phase ICON.
a. Use SELECT button to selecl It, ‘
4. Use — ,+ to correct fine trembling or Vldao noise.
MENU u» — + -> SELECT -> - +
1. Press the Menu button.
2. Use - .+ to move Color ICON.
3. Use SELECT button to select ll.
4. Use — ,+ into the submenu.
— + ->- MENU
1. Use _ ,+ to select the I or n.
2. Press the Menu button to exit.
-+->SELECT->—+--MENU
1. Use — 3 to move Red, Green, Blue ICON.
2. USB SELECT button IO SB|BC\ COW! what
you want.
3. Use - ,¢ to lncreeu of docram nun color.
4, Press the Menu button to exit.
;. r“... Lynn
SPECIAL
MENU w— — + -> SELECT ->- - +
1. Press the Menu button, .
2. Use » ,+ tu move SPECIAL ICON.
3. Use SELECT button to select It.
4. Use — ,+ into the submenu,
Adjust: », -
-— + -— SELECT ->— 1— + -> MENU
, 1. Use - ,+ to move SPECIAL ICON.
2, Use SELECT buttun lo select ll,
3, Use - ,+ to adjust level.
4. Press the Menu button to exit. 1
‘+ "'SELE°T'> -+ ->MENU
1, Use — ,+ Io move DOS Mode ICON.
2, Use SELECT button to select it.
3. use - ,+ to select DOS Mode what you want
L Press Menu button to exit,
—+ ->SELECT-> -—-+ ->MENU
OSD OverIa
1. Use - ,+ ta move OSD Overlay ICON.
2. Use SELECT button to select II. L ,
3. Use » x to udluet osD Overlay. “
4. Press Menu button Io exit
—+ ->SELECT-- —-+ ‘PMENU
1. Use - .* to move Sharpness ICON.
2. Use SELECT button to select It.
3. Use - ,+ to adjust Sharpness.
4. Pvess Menu button to exit.
MENU ‘F - + ->- SELECT "> - +
1. Press the Menu button.
2. Use — ,+ lo move Language ICON.
3. Use SELECT button to select It.
4. Use — ,+ tn select language In ardent
Auto - Coniig
MENU -> — + -> SELECT w» - +
1. Press the Menu button.
2. Use — ,+ to move the Auto-coring ICON.
3. Use SELECT button to select it.
4. Use - or + to readjust the display condition.
MENU->—+->;
L Press the Menu button. ,
2. Use - ,+ to move the Automnllg ICONA
Vou can know a display Intormalion
(Honzontal, Vertical Flequeney)
MENU -> — + -> $ELECT
1. Press the Menu button. ‘
2. Use — A to move the Exit ICON.
3. Press SELECT button to exit.
Standard Signal Table
. Horizontal Frequency vertical Frequency
Resauuon (HZ)
veA (340 x 450)
SVGA (300 X 600)
XGA (1024 x 765)
MAC (532 x 524)
Pin assignment table D-Sub
Mini 15pin connector
1 1 15
15pm D-Sub
Blun Video Ground -
. o o
Spec1f1cat10n
. ' ‘
Model j N? F .
fiype Amorphous activ—e main? fiuperTFT LED
Screen Size 3641om (Diagonal)
Maximum Resolution 1024 X 765 O 75 Hz
Pixel Range 0.297 mm X 0.297 mm -,
ESE; Display Colors (“N >_‘_ “M417
Contrast Rate 300 : 1
Visual Angle 60° 1 60° / 40° / 60‘ (Lott / Right / Up / Down)
Response Speed 1 35 ms 1
Brightness 200 cd/rn2 H
Synchro Horizontal Frequency 60kH1(Max.) :_
nization Vertical Frequency 75 Hz (Max)
Video Video Signal Analog RGB (0.714 Vpp) 75 ohm
“1pm Synchronous Signal Mode H, V Separate TTL Sync,‘
Power Maximum 35W
Consumption Power Saving Mode Under 5 W 1
Control key From Pan MENU,SELEGWAUTO,PC2WER—,+
Input: 90/264V (50—50 HZ),
Power Adapter _
Output: 12V, 3A, 36W l
Wall Mount VESA Standard ‘
Safety Salely Standard I_UL, CE, TUV, CB "r—
Standard EMI FCC
8‘ EM, Low Radiation MPR‘lI
Dimension Size and Weight 358 X 5110 X 346 / 3.8 Kg
- Check the power connection,
(Refer to page 4)
- Check the computer connection cable.
(Refer to page 4)
- Check the computer power is on.
- Check the signal cable between monitor
and computert (Ftefer to page 4)
- Perform Auto_oonflg.
- Remove attaches to the signal line
(Video extension cable and others)
and switch on
' Pertorm Clock and Adjust PHASE.
- Switch off/on the monitor.
0 Check the resolution and frequency of
computer and video card, and set up
again refer to the current monitor
mode and standard slgnat mode table
' Adjust COLOR at User Mode in 080 Color
Menul
- Check the resolution and frequency oi
computer and video card, and set up
again in relerence to the‘current monitor
mode and standard signal mode tablet
- Adjust COLOR at User Mode inosp Color
Menut ‘
- Perform Auto-Conlig.
e , - Monitor is in power saving model
Warning
To prevent damage or loss, please read this warning carefullyt
0 When connecting/disconnecting the plug, pull out
the plug itselt, and never pull the cord to prevent lire
caused by short.
. To prevent electric shock, do not connect/dis-
connect the plug with wet handt
. If you see smoke or smell something burning, stop
uslng the unlt, switch on the power, pull out the plug,
and then contact your local servlce station.
0 To prevent tire, do not connect a large number at
equipments in a single line.
. To prevent tire and electric shock, pull out the plug in
case of thunder and lightening.
eTo prevent tire and electric shock, do not try to take
the monitor apart or repair it yourself. Contact your
local service station or customer service center for
inspection, modification or repair.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2002:07:02 15:38:23-04:00
Create Date                     : 2002:07:02 18:34:05+09:00
Creator                         : Acrobat 4.0 Scan Plug-in for Windows
Producer                        : Acrobat 4.0 Scan Plug-in for Windows
Page Count                      : 11
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MSAB15DF

Navigation menu