Hansol LCD B17CF-2 LCD Monitor User Manual H750 cover
Hansol LCD Inc. LCD Monitor H750 cover
users manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 314227 |
| Application ID | ZbuLSnr5hAbj2fAc19nZvQ== |
| Document Description | users manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 97.63kB (1220391 bits) |
| Date Submitted | 2003-03-28 00:00:00 |
| Date Available | 2003-03-27 00:00:00 |
| Creation Date | 2002-12-28 11:59:24 |
| Producing Software | Acrobat Distiller 4.0.5 for Macintosh |
| Document Lastmod | 2002-12-28 14:41:42 |
| Document Title | H750_cover |
| Document Creator | QuarkXPress: PSPrinter 8.3.1 |
| Document Author: | ä |
17 Printed on the recyclable paper www.hansolel.co.kr Printed in Korea Part No. 942207040001-01 USER'S MANUAL TFT-LCD Color Monitor INFORMATION TO USER : This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by determined by turning the equipment off and on, the user is encouraged to try to crrent the interference by one or more of the fllowing measures: 1. Reorient/Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. Table of Contents Parts Connection to Signal Source the range of control Angle Installing Monitor Driver Name and Function of Front Power Management Feature 10 Adjusting OSD 11 Standard Signal Table 18 Specification 19 Troubleshooting 20 Warning 22 3. Connect the equipment into an outlet on a circuit difference from that to which the recerver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. CAUTION Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment ENERGY STAR As an ENERGY STAR partner, Hansol Electronics Inc. has determined that this product meets energy Star guidelines for energy efficiency. Good Posture Guide Parts Place the monitor to face the user and then adjust the monitor angle. Take a break (for about 10 minutes) at every hour during the work with monitor. Refer to the following figure to take the correct posture. about 50cm Look down the monitor below the horizon. Adjust the monitor to prevent reflection. LCD Monitor Relax shoulders and arms, and sit back on the chair. Adjust the monitor stand to acquire required angle. Maintain the arms horizontally and place hands softly on the keyboard. Signal Cable Stereo Cable(Option) AC Power Cable Keep feet flat on the ground. User's Manual / Warranty Card 2 - English Installation Diskette English - 3 Connection to Signal Source Basic Connection Port for AC power cable Port for Audio cable from audio source. Port for Head Phone or External Speaker Port for signal cable from signal source. < Power source connection > The range of control Angle How to Adjust the Stand Forward 3 < Signal cable connection> General For Macintosh Default Adapter for Macintosh (Optional) Refer to the table on the rear side of the optional Macintosh adapter and adjust DIP switch by the resolution. 1. Use 220 V or 110 V. (Free Voltage) 2. Connect monitor and Signal Source via Signal cable 3. Power on the monitor and computer. 4. Connection is finished. 4 - English Backward 30 English - 5 Installing Monitor Driver Run (Click) "Install" at Floppy Diskette driver and select the model name to set the optimum display in Window 95, 98 or 2000, XP. Use the Driver provided. Automatic Installation 1. Insert the Diskette to the Floppy Diskette driver. 2. Double-click "Install.exe". 3. Select the model and click "OK" button. 4. Select inf file, and then click "OK" button. 5. Click "Exit" button to close the installation. Click 'Advanced..'. Click 'Monitor'. Click 'Display a list of all...'. Click 'Next>'. Click 'Next>'. Click 'Change..'. Click 'Have Disk..'. Manual Installation 1. Insert the Diskette to the Floppy Diskette driver. 2. Click 'My Computer' and follow the procedure below. Select the driver and click 'OK'. Click 'Next>'. Click 'Control Panel'. 6 - English Click 'Display'. Click 'Settings'. Click 'Next>'. Click 'Finish'. 3. Select "Exit" if the monitor model is changed, and then reboot the Windows. English - 7 Name and Function of Front Front panel Functions Power button Power button is located in the lower center of the Front Bezel. You can push the button to turn on/off the power. Power Indicating LED Dark : Power off Green : Normal mode Green blinking : DPMS mode or Check Signal Cable mode. On Screen Display (OSD) Function Button OSD buttons on the front of bezel perform the following functions. MUTE BUTTON VOL BUTTON MENU/EXIT BUTTON +/ -/ SELECT/ AUTO BUTTON POWER BUTTON 8 - English BUTTON BUTTON MUTE : Press this button for mute control MENU/EXIT : Press this button to display menus. if you press this button when OSD is displayed, you can switch display to the previous menu and exit menu. SELECT/ AUTO : Press this button, when OSD is not displayed, to perform automatic setting. When OSD is displayed, You can select icons. POWER : Power button. +/ : By pressing these button when OSD is displayed, You can move -/ cursor into the menus which you want. After press the SELECT button, you can change gauge level or select submenus. When OSD is not displayed, you can adjust brightness or contrast. VOLUME : Press this button for volume control English - 9 Power Management Feature The monitor is equipped with a power saving circuit that confirms to the world-standard Display Power Manager Signalling (DPMS) mode of Video Electronics Standard Association (VESA). The power management feature requires that the video card of the computer should support DPMS function. Status LED Sign Power Consumption Normal mode Green ON Normal Power DPMS mode Green Blinking 1 W or Below DPMS with Audio (Option) Adjusting OSD Brightness &Contrast MENU SELECT 1. Press the MENU button to access main menu. 2. Use to move Brightness and Contrast ICON. 3. Press SELECT button into the submenu. Brightness Mute ON 1W or Below Mute OFF 10W or Below SELECT 1. Use to move Brightness ICON. 2. Press SELECT button to select it. 3. Use to adjust the brightness. No image is displayed with Green blinking. Monitor is in power saving mode. Use mouse or keyboard to release power saving mode. No image is displayed without LED on. Power cable plug must be pulled out. Check the power plug on monitor and on the wall. "Out of range" displayed on the screen. This message is displayed when the signal from video card exceeds the maximum frequency of the monitor. Readjust resolution and frequency in accordance with the monitor capacity. (Refer to Standard Signal Table) 10 - English Contrast SELECT 1. Use to move Contrast ICON. 2. Press SELECT button to select it. to adjust the contrast. 3. Use English - 11 Image Phase SELECT MENU 1. Press the MENU button to access main menu. 2. Use to move Image ICON. 3. Press SELECT button into the submenu. SELECT to move Phase ICON. 1. Press 2. Use SELECT button to select it. 3. Use to correct fine trembling or Video noise. Horizontal Position Clock SELECT 1. Use to move H-Position ICON. 2. Press SELECT button to select it. to adjust display left or right. 3. Use According to the characteristic of video card, control range can be changed. SELECT to move Clock ICON. 1. Use 2. Press SELECT button to select it. 3. Press or to remove vertical noise. ( Adjusting clock phase is required after the adjustment of clock.) Vertical Position Color SELECT 1. Use to move V-Position ICON. 2. Press SELECT button to select it. 3. Use to adjust display upward or downward. According to the characteristic of video card, control range can be changed. 12 - English MENU SELECT 1. Press MENU button to access main menu. 2. Use to move Color ICON. 3. Press SELECT button into the submenu. English - 13 Preset Color OSD Time MENU 1. Use to select the Mode 1, and Mode 2. 2. Press the Menu button to return previous state. Mode 1 : Reddish white Mode 2 : Bluish white 1. Use to move OSD Time ICON. 2. Press SELECT button to select it. 3. Use to adjust OSD display time. 4. Press Menu button to return main menu. OSD H-Position User Color SELECT SELECT MENU 1. Use to move User color ICON. 2. Press SELECT button to select it. 3. Use to increase or decrease each color. SELECT 1. Use to move OSD H-Position ICON. 2. Press SELECT button to select it. 3. Use to adjust OSD left or right. OSD V-Position OSD SELECT MENU SELECT 1. Press MENU button to access main menu. 2. Use to move OSD ICON. 3. Press SELECT button into the submenu. 14 - English 1. Use to move OSD V-Position ICON. 2. Press SELECT button to select it. 3. Use to adjust OSD upward or downward. English - 15 Factory Auto-Config Reset Zoom SELECT SELECT to move Zoom ICON. 1. Use 2. Press SELECT button to select OSD size. 3. Press Menu button to return main menu. 1. Use to move the Factory Reset ICON. 2. Press SELECT button to return to default setting. Special MENU SELECT 1. Press the MENU button to access main menu. to move Special ICON. 2. Use 3. Press SELECT button into the submenu. Auto-Config Information MENU SELECT 1. Use to move the Information ICON. 2. Press SELECT button to select it. You can know display information Accoding to the characteristic of video card, display information can be incorrect Language Sound Auto-Config (Option) MENU SELECT 1. Use to move Language ICON. 2. Press SELECT button to select it. 3. Use to select language. 16 - English MENU SELECT or VOL BUTTON 1. Use to move Sound ICON. 2. Press SELECT button to select it. 3. Use to control volume. 4. Press MENU button to return previous state. English - 17 Specification Standard Signal Table Resolution Horizontal Frequency (KHz) Vertical Frequency (Hz) Clock Frequency (MHz) VGA (720 X 400) 31.469 70.087 28.322 VGA (640 X 480) 31.469 59.940 25.175 VGA (640 X 480) 37.500 75.000 31.500 SVGA (800 X 600) 37.900 60.320 40.000 SVGA (800 X 600) 46.875 75.000 49.500 XGA (1024 X 768) 48.363 60.004 65.000 XGA (1024 X 768) 60.023 75.029 SXGA (1280 X 1024) 63.981 SXGA (1280 X 1024) Model H750(B17CF Type Amorphous active matrix super TFT LCD Screen Size 43.2cm (Diagonal) Maximum Resolution 1280 X 1024 @ 75 Hz Pixel Range 0.264 mm X 0.264 mm Display Colors 16.7M Color 78.750 Contrast Ratio 350 : 1 60.020 108.000 Viewing Angle 70째 / 70째 / 60째 / 60째 (Left / Right / Up / Down) 79.976 75.025 135.000 Response Time 25 msec MAC (640 X 480) 35.000 66.667 30.240 Luminance 250 cd/m MAC (832 X 624) 49.726 74.551 57.284 MAC (1152 X 870) 68.681 75.062 100.000 LCD Panel Synchro Horizontal Frequency nization Vertical Frequency Video Input Assignment Pin No. Assignment Red Video Green Video 10 5V Input Ground Blue Video N.C Ground 11 12 13 Ground SDA H.Sync Red Video Ground Green Video Ground 14 15 V.Sync SCL Blue Video Ground 18 - English Control key Front Part 10 15 48W Under 1 W MUTE MENU / EXIT, SELECT/AUTO, POWER, , +/ , VOL Power Supply Input: 90/264Vac (50~60 Hz), 0.65A Wall Mount VESA Standard Safety Standard 11 Analog RGB (0.714 Vpp) 75 ohm -/ 75 Hz (Max.) Synchronous Signal Mode H, V Separate TTL Sync, Maximum Power Consumption Power Saving Mode Pin assignment table D-Sub Mini 15pin connector Pin No. Video Signal 79.9kHz (Max.) UL, CE, TUV, CB Safety Standard EMI & EMI Low Radiation MPR-II Dimension Size and Weight 380 176 368 / 5.8kg FCC,RRL 15pin D-Sub English - 19 Troubleshooting Power LED is dark. No picture. Check the power connection. (Refer to page 4) Color is irregular. Adjust COLOR at User Mode in OSD Color Menu. OSD, "check cable." is displayed on the screen. Check the computer power is on. Double images or 'ghosts'. Check the resolution and frequency of computer and video card, and set up again in reference to the current monitor mode and standard signal mode table. Message, "No cable." is displayed on the screen. Check the signal cable between monitor and computer. (Refer to page 4) Screen looks to be run down. Perform Auto_config. Picture is dark. Picture is biased or cut or too wide. Screen is not clear. Display is unstable and trembling. 20 - English Remove attaches to the signal line (Video extension cable and others) and switch on. Perform Auto-config. Adjust clock and PHASE. Check the resolution and frequency of computer and video card, and set up again refer to the current monitor mode and standard signal mode table. Power LED turns into Green blinking. NO SOUND Adjust COLOR at User Mode in OSD Color Menu. Perform Auto-Config. Monitor is in DPMS mode. Check the voice signal connection code or adjust volume English - 21 Warning To prevent damage or loss, please read this warning carefully. When connecting/disconnecting the plug, pull out the plug itself, and never pull the cord to prevent fire caused by short. To prevent electric shock, do not connect/disconnect the plug with wet hand. If you see smoke or smell something burning, stop using the unit, switch off the power, pull out the plug, and then contact your local service station. To prevent fire, do not connect a large number of equipments in a single line. To prevent fire and electric shock, pull out the plug in case of thunder and lightening. To prevent fire and electric shock, do not try to take the monitor apart or repair it yourself. Contact your local service station or customer service center for inspection, modification or repair. 22 - English
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2002:12:28 11:59:24 Producer : Acrobat Distiller 4.0.5 for Macintosh Author : Á¤ Creator : QuarkXPress: PSPrinter 8.3.1 Title : H750_cover Modify Date : 2002:12:28 14:41:42+09:00 Page Count : 13EXIF Metadata provided by EXIF.tools