Hansol LCD B17DF-1 17" LCD MONITER User Manual model
Hansol LCD Inc. 17" LCD MONITER model
manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 349808 |
| Application ID | jttsCvzzbWjiZnUJo1jNJQ== |
| Document Description | manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 101.18kB (1264696 bits) |
| Date Submitted | 2003-08-21 00:00:00 |
| Date Available | 2003-08-21 00:00:00 |
| Creation Date | 2003-04-09 01:48:52 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2003-08-18 15:28:33 |
| Document Title | model.book |
| Document Creator | FrameMaker 5.5.6p145 |
| Document Author: | kim |
User’s Guide H750D(B17DF) TFT-LCD Monitor Table of Contents Regulatory Information .......................................................................................................................... 2 Introduction Package ....................................................................................................................................................3 The range of control Angle ....................................................................................................................... 3 Connection to Signal Source .................................................................................................................... 4 Controls Front panel ................................................................................................................................................5 Functions .................................................................................................................................................. 5 Adjusting OSD .......................................................................................................................................... 6 HOT KEY ................................................................................................................................................ 11 Power Management Feature ............................................................................................................... 12 Standard Signal Table .......................................................................................................................... 12 Specifications ........................................................................................................................................ 13 Pin assignment table D-Sub Mini 15pin connector ...................................................................... 14 Troubleshooting .................................................................................................................................... 15 TFT-LCD Monitor Regulatory Information - FCC Information This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment can generates, uses, and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause unacceptable interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced Radio/TV technician for help. Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. - Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. - Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. - Energy Star As an ENERGY STAR partner, Hansol Electronics Inc. has determined that this product meets energy Star guidelines for energy efficiency. Notice The information contained in this document is subject to change without notice. TFT-LCD Monitor Introduction - Package Congratulations on your purchase of this top quality color monitor! The items illustrated below are contained in the carton. First, be sure that your carton includes all of them. If any items are missing or damaged, please contact your local dealer or supplier. UK LCD Monitor Signal Cable (Analog) U.S.A/ Canada Stereo Cable (Option) AC Power Cable Warranty Card - The range of control Angle CD (User’s Guide & etc) Signal Cable(DVI) Europe Australia Korea How to Adjust the Stand ▲ Forward 3° ▲ Default ▲ Backward 30° TFT-LCD Monitor . Introduction - Connection to Basic Connection Signal Source ① Port for AC power cable. ② Port for Audio cable from audio source. ③ Port for Head Phone or External Speaker. ④ Port for signal cable from DVI signal source. ⑤ Kensington Lock. ⑥ Port for signal cable from analog signal source. ① ②③④ ⑤ ⑥1. Use 220V or 110 V.(Free Voltage) 2. Connect monitor and Signal Source via Signal cable. 3. Power on the monitor and computer. 4. Connection is finished. General For Macintosh Adapter for Macintosh(Optional) Refer to the table on the rear side of the optional Macintosh adapter and adjust DIP switch by the resolution. TFT-LCD Monitor Controls - Front panel SOURCE BUTTON VOL/MUTE BUTTON / + BUTTON MENU/EXIT BUTTON / – BUTTON SELECT/AUTO BUTTON POWER BUTTON (Power indicating LED) - Functions Power button Power button is located in the lower center of the Front Bezel. You can push the button to trun on/off the power. Power Indicating LED Dark : Power off Green : Normal mode Green blinking : DPMS mode or Check Signal Cable mode. On Screen Display(OSD) Function Button OSD buttons on the front of bezel perform the following functions. SOURCE : Press this button to change Analog/DVI display. MENU/EXIT : Press this button to display menus. if you press this button when OSD is displayed, you can switch display to the previous menu and exit menu. SELECT/AUTO : Press this button, when OSD is not displayed, to perform automatic setting. When OSD is displayed, You can select icons. POWER : Power button. +/ ,–/ : By pressing these button when OSD is displayed, You can move cursor into the menus which you want. After press the SELECT button, you can change gauge level or select submenus. When OSD is not displayed, you can adjust brightness or contrast. VOLUME/MUTE : Press this button for volume control. When Control is displayed, You can control mute by pressing this button. TFT-LCD 모니터 Controls - Adjusting OSD Input Source MENU – + SELECT 1. Press the MENU button to access main menu. 2. Use –,+ to move Input source ICON. 3. Press SELECT button into the submenu. Digital Input ◈ Input Source Submenu – + SELECT 1. Use –,+ to move Digital input ICON. 2. Press SELECT button to select DVI display. Analog Input ◈ Input Source Submenu – + SELECT 1. Use –,+ to move Analog input ICON. 2. Press SELECT button to select Analog display. Brightness & Contrast MENU – + SELECT 1. Press the MENU button to access main menu. 2. Use –,+ to move Brightness and Contrast ICON. 3. Press SELECT button into the submenu. TFT-LCD 모니터 Brightness ◈ Brightness & Contrast Submenu – + SELECT – + 1. Use –,+ to move Brightness ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust the brightness. Contrast ◈ Brightness & Contrast Submenu – + SELECT – + 1. Use –,+ to move Contrast ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust the contrast. Clock Phase MENU – + SELECT 1. Press the MENU button to access main menu. 2. Use –,+ to move Clock Phase ICON. 3. Press SELECT button into the submenu. Horizontal Position ◈ Clock Phase Submenu – + SELECT – + 1. Use –,+ to move H-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust display left or right. According to the characteristic of video card, control range can be changed. TFT-LCD 모니터 Vertical Position ◈ Clock Phase Submenu – + SELECT – + 1. Use –,+ to move V-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust display upward or downward. According to the characteristic of video card, control range can be changed. Clock Phase ◈ Clock Phase Submenu – + SELECT – + 1. Press –,+ to move Clock Phase ICON. 2. Use SELECT button to select it. 3. Use –,+ to correct fine trembling or Video noise. Clock ◈ Clock Phase Submenu – + SELECT – + 1. Use –,+ to move Clock ICON. 2. Press SELECT button to select it. 3. Press – or + to remove vertical noise. (Adjusting clock phase is required after the adjustment of clock.) Color MENU – + SELECT 1. Press MENU button to access main menu. 2. Use –,+ to move Color ICON. 3. Press SELECT button into the submenu. TFT-LCD 모니터 Preset Color ◈ Color Submenu – + MENU 1. Use –,+ to select the 6500K, and 9300K. 2. Press the Menu button to return previous state. ※ 6500K : Reddish white / 9300K : Bluish white User Color ◈ Color Submenu – + SELECT – + MENU 1. Use –,+ to move User color ICON. 2. Press SELECT button to select it. 3. Use –,+ to Shift the color what you want. 4. Use select button to select it. 5. Use –,+ to increase or decrease each color. 6. Press the menu button to return previous state. Special MENU – + SELECT 1. Press MENU button to access main menu. 2. Use –,+ to move Special ICON. 3. Press SELECT button into the submenu. Language ◈ Special Submenu MENU –+ SELECT –+ 1. Use –,+ to move Language ICON. 2. Press SELECT button to select it. 3. Use –,+ to select language. TFT-LCD 모니터 Factory Reset ◈ Special Submenu – + SELECT 1. Use –,+ to move the Factory Reset ICON. 2. Press SELECT button to return to default setting. Information ◈ Special Submenu MENU – + SELECT 1. Use –,+ to move the Information ICON. 2. Press SELECT button to select it. You can know display information * Accoding to the characteristic of video card, display information can be incorrect. OSD H-Position ◈ Special Submenu – + SELECT – + 1. Use –,+ to move OSD H-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust OSD left or right. OSD V-Position ◈ Special Submenu – + SELECT – + 1. Use –,+ to move OSD V-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust OSD upward or downward. 10 TFT-LCD 모니터 OSD Time ◈ Special Submenu – + SELECT – + 1. Use –,+ to move OSD Time ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust OSD display time. Sound(Option) MENU – + SELECT or VOL BUTTON 1. Use –,+ to move Sound ICON. 2. Press SELECT button to select it. 3. Use –,+ to control volume. 4. Press MENU button to return previous state. - HOT KEY ANALOG & DVI When change DVI display into Analog display, select source button located in the left. Analog display will be showed after Analog input message. When change Analog display into DVI display, select source button located in the left. DVI display will be showed after DVI input message. No signal input message will be displayed when video card output is not mated with monitor source. 11 TFT-LCD Monitor Power Management Feature The monitor is equipped with a power saving circuit that confirms to the world-standard Display Power Manager Signalling (DPMS) mode of Video Electronics Standard Association(VESA). The power management feature requires that the video card of the computer should support DPMS function. Status LED Sign Power Consumption Normal mode Green ON DPMS mode Green Blinking Normal Power 1 W or Below(Analog)/ 3.5 W or Below(DVI) DPMS with Audio(Option) Mute ON Mute OFF 1W or Below(Analog) / 3.5 W or Below(DVI) 10W or Below No image is displayed with Green blinking. Monitor is in power saving mode. Use mouse or keyboard to release power saving mode. No image is displayed without LED on. Power cable plug must be pulled out. Check the power plug on monitor and on the wall. "Out of range" displayed on the screen. This message is displayed when the signal from video card exceeds the maximum frequency of the monitor. Readjust resolution and frequency in accordance with the monitor capacity.(Refer to Standard Signal Table) Standard Signal Table Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) Clock Frequency (MHz) VGA (720 x 400) VGA (640 x 480) VGA (640 x 480) SVGA (800 x 600) SVGA (800 x 600) XGA (1024 x 768) XGA (1024 x 768) SXGA (1280 x 1024) SXGA (1280 x 1024) MAC (640 x 480) MAC (832 x 624) MAC (1152 x 870) 31.469 31.469 37.500 37.900 46.875 48.363 60.023 63.981 79.976 35.000 49.726 68.681 70.087 59.940 75.000 60.320 75.000 60.004 75.029 60.020 75.025 66.667 74.551 75.062 28.322 25.175 31.500 40.000 49.500 65.000 78.750 108.000 135.000 30.240 57.284 100.000 Sync Polarity (H/V) /+ /－ －/－ +/+ +/+ +/+ +/+ +/+ +/+ －/－ －/－ －/－ － － 12 TFT-LCD Monitor Specifications ITEM LCD Panel Synchronization Video Input H750D(B17DF) Type Amorphous active matrix super TFT LCD Screen Size 43.2cm (Diagonal) Maximum Resolution 1280 X 1024 @ 75Hz Pixel Range 0.264mm X 0.264mm Display Colors 16.7M Color Contrast Ratio 350 : 1 Viewing Angle 70° / 70° / 60° / 60° (Left / Right / Up / Down) Response Time 25 msec Luminance 250 cd/m2 Horizontal Frequency 79.9 kHz(Max.) Vertical Frequency 75 Hz-Analog / 72Hz-DVI(Max.) Video Signal Analog RGB (0.714 Vpp) 75 ohm Synchronous Signal Mode H, V Separate TTL Sync. Power Consumption Maximum 48 W Power Saving Mode Under 1 W(Analog)/Under 3.5 W(DVI) Contol Key Front Part SOURCE, MENU/EXIT, AUTO/SELECT, POWER, – / , + / , VOL/MUTE Normal 1W / Ch Max 1.5W / Ch Audio Output Power Supply Input : 100~240 Vac(50~60Hz), 0.6A Wall Mount VESA Standard Safety Standard&EMI Dimension Safety Standard UL, CE, TUV, CB EMI FCC, RRL Low Radiation MPR - II Size and Weight 380 X 176 X 368 / 5.8Kg 13 TFT-LCD 모니터 Pin assignment table D-Sub Mini 15pin connector Analog Cable Pin No. Assignment Pin No. Assignment Red Video 5V Input Green Video 10 Ground Blue Video 11 Ground N.C 12 SDA Ground 13 H-Sync. Red Video Ground 14 V-Sync. Green Video Ground 15 SCL Blue Video Ground 10 11 15 (15 pin D-Sub) DVI Cable Pin No. Assignment Pin No. Assignment TX2 – 15 Ground TX2 + 16 5V input DVI input detect 17 TX0 – NC 18 TX0 + NC 19 Ground (D_DSCL) 20 NC (D_DSDA) 21 NC NC 22 Ground TX1 – 23 TXC + 10 TX1 + 24 TXC – 11 Ground 25 NC 12 NC 26 NC 13 NC 27 NC 14 DVI_I ground 28 NC 8 D1 D2 D4 17 24 D3 14 TFT-LCD Monitor Troubleshooting Problem Solution Power LED is dark. No picture. Check the power connection (Refer to Introduction) OSD, “check signal.” is displayed on the screen. Check the computer power is on. Message, “check cable.” is displayed on the screen. Check the signal cable between monitor and computer. (Refer to Introduction) Screen looks to be run down. Perform Auto-config. Remove attaches to the signal line(Video extension cable and others) and switch on. Perform Auto-config. Adjust clock and PHASE. Screen is not clear. Display is unstable and trembling. Check the resolution and frequency of computer and video card, and set up again refer to the current monitor mode and standard signal mode table. Color is irregular. Adjust COLOR at User Mode in OSD Color Menu. Check the resolution and frequency of computer and video card, and set up again in reference to the current monitor mode and standard signal mode table. Picture is dark. Adjust COLOR at User Mode in OSD Color Menu. Picture is biased or cut or too wide. Perform Auto-config. Power LED turns into Green blinking. Monitor is in DPMS mode. No SOUND. Check the voice signal connection code or adjust volume. Double images or ‘ghosts’. 15 User’s Guide TFT-LCD MONITOR Visit for more Information www.hansollcd.com TFT-LCD Monitor Table of Contents Introduction Good Posture Guide ............................................................................................................................................2 Safety Information ...............................................................................................................................................3 Connection to Signal Source .............................................................................................................................. 5 Installing Monitor Driver ............................................................................................................................ 6 Service Center ............................................................................................................................................. 10 Introduction - Good Posture Guide * Place the monitor to face the user and then adjust the monitor angle. * Take a break(for about 10 minutes) at every hour during the work with monitor. * Refer to the following figure to take the correct posture about 50cm Look down the monitor below the horizon. Adjust the monitor to prevent reflection. Relax shoulders and arms, and sit back on the chair. Adjust the monitor stand to acquire required angle. Maintain the arms horizontally and place hands softly on the keyboard. Keep feet flat on the ground. TFT-LCD Monitor Introduction - Safety infomation To prevent damage or loss, please read this warning carefully. When connecting/disconnecting the plug, pull out the plug itself, and never pull the cord to prevent fire caused by short. To prevent electric shock, do not connect/disconnect the plug with wet hand. To prevent fire, do not connect a large number of equipments in a single line. If you see smoke or smell something burning, stop using the unit, switch off the power, pull out the plug, and then contact your local service station. To prevent fire and electric shock, pull out the plug in case of thunder and lightening. TFT-LCD Monitor Install the monitor near an outlet that you can reach easily. Disconnect the product by grasping the plug firmly and pulling in from the outlet. Never disconnect it by pulling the cord. Slots and openings in the cabinet are provided for ventilation; these openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. Never insert anything metallic into the monitor openings. Doing so may create a danger of electric shock To prevent fire and electric shock, do not try to take the monitor apart or repair it yourself. Contact your local sevice station or customer sevice center for inspection, modification or repair. Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp, lint-free cloth for cleaning. TFT-LCD Monitor Introduction - Connection to Basic Option Signal Source ① Port for 12V DC cable from adapter or stand. ② Port for signal cable from signal source. ③ Port for AC power cable. ①②③ ①② Basic Option General For Macintosh Adapter for Macintosh(Optional) Refer to the table on the rear side of the optional Macintosh adapter and adjust DIP switch by the resolution. 1. Use 220V or 110 V.(Free Voltage) 2. Connect monitor and Signal Source via Signal cable. 3. Power on the monitor and computer. 4. Connection is finished. TFT-LCD Monitor Installing Monitor Driver - Automatic Installation - Manual Installation (Windows 2000) 1. Insert the CD to the CD-ROM driver. 2. Double-click “Install.exe”. 3. Select the model and click “OK” button. 4. Select inf file, and then click “OK” button. 5. Click “Exit” button to close the installation. 1. Insert the CD to the CD-ROM driver. 2. Click ‘My Computer’ and follow the procedure below. ① Click 'Control Panel'. ② Click ‘Display’. ③ Click ‘Settings’. ④ Click ‘Advanced..’. ⑤ Click ‘Monitor’. ⑦ Click ‘Driver’. ⑥ Click ‘Properties’. ⑧ Click ‘Update Driver’. ⑨ Click ‘Next>’. TFT-LCD Monitor ⑩ Click ‘Display a list of all...’. ⑫ Click ‘Have Disk...’ ⑪ Click ‘Next>’. (ex : H711, 730ED...) ⑭ Click ‘Next>’. ⑮ Click ‘Next>’ (ex : H711, 730ED...) (ex : H711, 730ED...) ⑬ Select the driver and click ‘OK’. ● Click ‘Finish’. (ex : H711, 730ED...) 3. Select “Exit” if the monitor model is changed, and then reboot the Windows. TFT-LCD Monitor (Windows XP) Microsoft ® Windows ® XP Operating System 1. Insert CD into the CD-ROM driver. 2. Click "Start" → "Control Panel" then click the "Appearance and Themes" Icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced..". 4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab 5. Click "Update Driver.." and select "Install from a list or.." then click "Next" button. 6. Select "Don't search ,I will.." then click "Next" and then click "Have disk". 7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the "Next" button. 8. Click the "Close" button then click "OK" button continually. 9. Monitor driver installation is completed. (Windows Me) Microsoft ® Windows ® Millennium Operating System 1. Click "Start" , "Setting" , "Control Panel". 2. Double click "Display" icon. 3. Select the "Settings" tab and click "Advanced Properties" button. 4. Select the "Monitor" tab. 5. Click the "Change" button in the "Monitor Type" area. 6. Choose "Specify the location of the driver". 7. Choose "Display a list of all the driver in a specific location.." then click "Next" button. 8. Click the "Have Disk" button. 9. Specify A:\(D:\driver) then click "OK" button. 10. Select "Show all devices" and choose the monitor that corresponds to the one you connected to your computer and click "OK". 11. Continue choosing "Close" button and "OK" button until you close the Display Properties dialogue box. (You can get some other screen for warning message or others, then click the appreciate option for your monitor.) (Windows 98) Microsoft ® Windows ® 98 Operating System 1. Click "Start" , "Setting" , "Control Panel". 2. Double click "Display" icon. 3. Select the "Settings" tab and click "Advanced Properties" button. 4. Select the "Monitor" tab. 5. Click the "Change" button in the "Monitor Type" area then click "Next" button. 6. Choose "Display a list of all the driver.." then click "Next" button. 7. Click the "Have Disk" button, then click "browse.." button. 8. Specify A:\(D:\driver) then click "OK" button. 9. The "Select Device" dialogue box will appear. Select "Show all devices" then choose the monitor that corresponds to the one you connected to your computer and click OK. 10. Continue choosing "Close" button and "O.K" button until you close the Display Properties dialogue box. TFT-LCD Monitor (Windows 95) Microsoft ® Windows ® 95 Operating System .First determine the Windows 95 version installed on your computer by right-clicking the My Computer icon on PC and selecting Properties. The version number is listed under System. Perform the steps for the appropriate version. Version 4.00.950A 1. Click Start, Settings, Control Panel, and then double-click "Display" icon. 2. In the "Display Properties" window, click the "Settings" tab and click "Change Display Type". 3. In the "Change Display Type" window, click "Change" and then click "Have Disk". 4. Click "browse.." button and specify A:\(D:\driver) and click "OK". 5. In the Select Device window, click the appropriate monitor model and then click OK. 6. Continue choosing "Close" button and "OK" button until you close the "Display Properties" dialogue box. Version 4.00.950B 1. Click Start, Settings, Control Panel, and then double-click "Display" icon. 2. In the "Display Properties" window, click the Settings tab and then click "Advanced Properties" button. 3. In the "Advanced Display Properties" window, click the "Monitor" tab and then click "Change" button. 4. In the "Select Device" window, click "Have Disk" button. 5. Click "browse.." button and specify A:\(D:\driver) and click "OK". 6. In the "Select Device" window, click the appropriate monitor model and then click "OK". 7. Continue choosing "Close" button and "OK" button until you close the "Display Properties" dialogue box. (Windows NT) Microsoft ® Windows ® NT Operating System 1. Click Start, Settings, Control Panel, and then double-click Display icon. 2. In Display Registration Information window, click Settings Tab and then click All Display Modes. 3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency) and then click OK. 4. Click Apply button if you see the screen working normally after clicking Test. If the screen is not normal, change to a different mode (lower mode of resolution, colors or frequency). Note: If there is no Mode at All Display Modes, select the level of resolution and vertical frequency by referring to the Preset Display Modes in the user guide. (Linux) Linux Operating System To execute X-Window, you need to make the X86Config file, which is a type of system setting file. 1. Press Enter at the first and the second screen after executing the X86Config file. 2. The third screen is for setting your mouse. 3. Set a mouse for your computer. 4. The next screen is for selecting a keyboard. 5. Set a Keyboard for your computer. 6. The next screen is for setting your monitor. 7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) 8. Set a vertical frequency for your monitor. (You can enter the frequency directly.) 9. Enter the model name of your monitor. This information will not affect the actual execution of X-Window. 10. You have finished setting up your monitor. Execute X-Window after setting other requested hardware. Service Center EUROPE Country ASC Tel Country ASC Tel U. K Pulse Service Centre Ltd. 44-(0)-870-013-4470 Hungary Profit Service Center Kft. 36 1 399 0405 Germany BITRONICS GmbH 49-3634-683313 Bulgaria RTS 359-2-971-2020 France DATEX 33-1- 69- 310101 SWITZERLANDS TPA PANATLANTIC AG 41 1 886 10 16 Spain FREE ELECTRONICA S.A 34 91 6774787 SLOVAKIA BGS-Distribution a.s 421 7 49101563 Finland PowerMill OY 358 9 561 86130 LATVIA ELKO-RIGA 371-709-3240 Ireland Power Supplies Repair Agency LTD 353 1 286 1343 Greece Alman Hellas Ltd. 3010 2409150 Belgium SIMEX NV 32 16 40 58 44 SLOVENIA ACORD 92 d.o.o. 386 1 583 72 62 Norway Effekt A/S 47 333 00 630 Croatia ZEL-COS d.o.o 358-1-615-9644 Portugal CorpoTecnico 351 21 317 0210 Romania S.C. Shark Industries S.A 40 1 224 22 58 Sweden ANOVO Nordic 46 13 202 428 Romania Flamingo Computers SA 4 236 2000(231) Denmark Strax 45 70 10 7101 Yugoslavia PAKOM A.D. 381 18 52 11 16 Czech ExtraPoint(Karma) 42022576650 Ukraine MTI 380 44 458 00 32 U.S.A , CANADA Country USA ASC Tel Think AT(West Area) 1-562-531-3815 Far East(East Area) 1-201-935-5939 Techpoint(South Area) 1-813-249-5808 Ko-Am Electronics(West Area) 1-604-273-5622 Electrodesign(East Area) 1-514-331-3202 CANADA 10
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2003:04:09 01:48:52Z Modify Date : 2003:08:18 15:28:33+09:00 Page Count : 25 Creation Date : 2003:04:09 01:48:52Z Mod Date : 2003:04:10 11:53:58+09:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : kim Metadata Date : 2003:04:10 11:53:58+09:00 Creator : kim Title : model.book Page Mode : UseOutlines Has XFA : NoEXIF Metadata provided by EXIF.tools