Hansol LCD B17DF 17" LCD MONITOR User Manual model
Hansol LCD Inc. 17" LCD MONITOR model
Contents
- 1. MANUAL
- 2. USERS MANUAL
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 374737 |
| Application ID | +xQm2yl8C6EIRbLIr43PJQ== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 64.57kB (807089 bits) |
| Date Submitted | 2003-11-19 00:00:00 |
| Date Available | 2003-11-19 00:00:00 |
| Creation Date | 2003-01-30 05:36:50 |
| Producing Software | Acrobat Distiller 5.0 (Windows) |
| Document Lastmod | 2003-07-01 17:01:53 |
| Document Title | model.book |
| Document Creator | FrameMaker 5.5.6p145 |
User’s Guide H750(B17DF) TFT-LCD Monitor Table of Contents Regulatory Information .......................................................................................................................... 2 Introduction Package ....................................................................................................................................................3 The range of control Angle ....................................................................................................................... 3 Connection to Signal Source .................................................................................................................... 4 Controls Front panel ................................................................................................................................................5 Functions .................................................................................................................................................. 5 Adjusting OSD .......................................................................................................................................... 6 Power Management Feature ............................................................................................................... 12 Standard Signal Table .......................................................................................................................... 12 Specifications ........................................................................................................................................ 13 Pin assignment table D-Sub Mini 15pin connector ...................................................................... 14 Troubleshooting .................................................................................................................................... 15 TFT-LCD Monitor Regulatory Information - FCC Information This equipment has been tested and found to comply with limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment can generates, uses, and radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause unacceptable interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures. Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced Radio/TV technician for help. Caution Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. - Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. - Avis Canadien Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. - Energy Star As an ENERGY STAR partner, Hansol Electronics Inc. has determined that this product meets energy Star guidelines for energy efficiency. Notice The information contained in this document is subject to change without notice. TFT-LCD Monitor Introduction - Package Congratulations on your purchase of this top quality color monitor! The items illustrated below are contained in the carton. First, be sure that your carton includes all of them. If any items are missing or damaged, please contact your local dealer or supplier. UK LCD Monitor Signal Cable U.S.A/ Canada Stereo Cable (Option) AC Power Cable Warranty Card - The range of control Angle CD (User’s Guide & etc) Europe Australia Korea How to Adjust the Stand ▲ Forward 3° ▲ Default ▲ Backward 30° TFT-LCD Monitor . Introduction - Connection to Basic Connection Signal Source ① ② ③ ④ ⑤ ① Port for AC power cable. Port for Audio cable from audio source. Port for Head Phone or External Speaker. Port for signal cable from signal source. Kensington Lock. ②③④ ⑤1. Use 220V or 110 V.(Free Voltage) 2. Connect monitor and Signal Source via Signal cable. 3. Power on the monitor and computer. 4. Connection is finished. General For Macintosh Adapter for Macintosh(Optional) Refer to the table on the rear side of the optional Macintosh adapter and adjust DIP switch by the resolution. TFT-LCD Monitor Controls - Front panel MUTE BUTTON VOL BUTTON +/ MENU/EXIT BUTTON –/ SELECT/AUTO BUTTON BUTTON BUTTON POWER BUTTON (Power indicating LED) - Functions Power button Power button is located in the lower center of the Front Bezel. You can push the button to trun on/off the power. Power Indicating LED Dark : Power off Green : Normal mode Green blinking : DPMS mode or Check Signal Cable mode. On Screen Display(OSD) Function Button OSD buttons on the front of bezel perform the following functions. MUTE : Press this button for mute control. MENU/EXIT : Press this button to display menus. if you press this button when OSD is displayed, you can switch display to the previous menu and exit menu. SELECT/AUTO : Press this button, when OSD is not displayed, to perform automatic setting. When OSD is displayed, You can select icons. POWER : Power button. +/ ,–/ : By pressing these button when OSD is displayed, You can move cursor into the menus which you want. After press the SELECT button, you can change gauge level or select submenus. When OSD is not displayed, you can adjust brightness or contrast. VOLUME : Press this button for volume control. TFT-LCD Monitor Controls - Adjusting OSD Brightness & Contrast MENU – + SELECT 1. Press the MENU button to access main menu. 2. Use –,+ to move Brightness and Contrast ICON. 3. Press SELECT button into the submenu. Brightness – + SELECT – + 1. Use –,+ to move Brightness ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust the brightness. Contrast – + SELECT – + 1. Use –,+ to move Contrast ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust the contrast. Image MENU – + SELECT 1. Press the MENU button to access main menu. 2. Use –,+ to move Image ICON. 3. Press SELECT button into the submenu. TFT-LCD Monitor Horizontal Position – + SELECT – + 1. Use –,+ to move H-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust display left or right. According to the characteristic of video card, control range can be changed. Vertical Position – + SELECT – + 1. Use –,+ to move V-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust display upward or downward. According to the characteristic of video card, control range can be changed. Phase – + SELECT – + 1. Press –,+ to move Phase ICON. 2. Use SELECT button to select it. 3. Use –,+ to correct fine trembling or Video noise. Clock – + SELECT – + 1. Use –,+ to move Clock ICON. 2. Press SELECT button to select it. 3. Press – or + to remove vertical noise. (Adjusting clock phase is required after the adjustment of clock.) TFT-LCD Monitor Color MENU – + SELECT 1. Press the MENU button to access main menu. 2. Use –,+ to move Color ICON. 3. Press SELECT button into the submenu. Preset Color – + MENU 1. Use –,+ to select the Mode 1, and Mode 2. 2. Press the MENU button to return previous state. Modus 1 : Rötliches Weiß Modus 2 : Bläuliches Weiß User Color – + SELECT – + MENU 1. Use –,+ to move User color ICON. 2. Press SELECT button to select it. 3. Use –,+ to increase or decrease each color. OSD MENU – + SELECT 1. Press MENU button to access main menu. 2. Use –,+ to move OSD ICON. 3. Press SELECT button into the submenu. TFT-LCD Monitor OSD Time – + SELECT – + 1. Use –,+ to move OSD Time ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust OSD display time. 4. Press Menu button to return main menu. OSD H-Position – + SELECT – + 1. Use –,+ to move OSD H-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust OSD left or right. OSD V-Position – + SELECT – + 1. Use –,+ to move OSD V-Position ICON. 2. Press SELECT button to select it. 3. Use –,+ to adjust OSD upward or downward. Zoom – + SELECT 1. Use –,+ to move Zoom ICON. 2. Press SELECT button to select OSD size. 3. Press Menu button to return main menu. TFT-LCD Monitor Special MENU – + SELECT 1. Press the MENU button to access main menu. 2. Use –,+ to move Special ICON. 3. Press SELECT button into the submenu. Language MENU – + SELECT – + 1. Use –,+ to move Language ICON. 2. Press SELECT button to select it. 3. Use –, + to select language. Factory Reset – + SELECT 1. Use –,+ to move the Factory Reset ICON. 2. Press SELECT button to return to default setting Information MENU – + SELECT 1. Use –,+ to move the Information ICON. 2. Press SELECT button to select it. You can know display information * Accoding to the characteristic of video card, display information can be incorrect. 10 TFT-LCD Monitor Sound(Option) MENU – + SELECT or VOL BUTTON 1. Use –,+ to move Sound ICON. 2. Press SELECT button to select it. 3. Use –,+ to control volume. 4. Press MENU button to return previous state. 11 TFT-LCD Monitor Power Management Feature The monitor is equipped with a power saving circuit that confirms to the world-standard Display Power Manager Signalling (DPMS) mode of Video Electronics Standard Association(VESA). The power management feature requires that the video card of the computer should support DPMS function. Status LED Sign Power Consumption Normal mode DPMS mode Green ON Green Blinking Normal Power 1 W or Below DPMS with Audio(Option) Mute ON Mute OFF 1W or Below 10W or Below No image is displayed with Green blinking. Monitor is in power saving mode. Use mouse or keyboard to release power saving mode. No image is displayed without LED on. Power cable plug must be pulled out. Check the power plug on monitor and on the wall. "Out of range" displayed on the screen. This message is displayed when the signal from video card exceeds the maximum frequency of the monitor. Readjust resolution and frequency in accordance with the monitor capacity.(Refer to Standard Signal Table) Standard Signal Table Resolution Horizontal Frequency(kHz) Vertical Frequency(Hz) Clock Frequency (MHz) Sync Polarity (H/V) VGA (720 x 400) VGA (640 x 480) VGA (640 x 480) SVGA (800 x 600) SVGA (800 x 600) XGA (1024 x 768) XGA (1024 x 768) SXGA (1280 x 1024) SXGA (1280 x 1024) MAC (640 x 480) MAC (832 x 624) MAC (1152 x 870) 31.469 31.469 37.500 37.900 46.875 48.363 60.023 63.981 79.976 35.000 49.726 68.681 70.087 59.940 75.000 60.320 75.000 60.004 75.029 60.020 75.025 66.667 74.551 75.062 28.322 25.175 31.500 40.000 49.500 65.000 78.750 108.000 135.000 30.240 57.284 100.000 /+ －/－ －/－ +/+ +/+ +/+ +/+ +/+ +/+ －/－ －/－ －/－ － 12 TFT-LCD Monitor Specifications B17DF ITEM LCD Panel Synchronization Video Input Type Amorphous active matrix super TFT LCD Screen Size 43.2cm (Diagonal) Maximum Resolution 1280 X 1024 @ 75Hz Pixel Range 0.264mm X 0.264mm Display Colors 16.7M Color Contrast Ratio 350 : 1 Viewing Angle 70° / 70° / 60° / 60° (Left / Right / Up / Down) Response Time 25 msec Luminance 250 cd/m2 Horizontal Frequency 79.9 kHz(Max.) Vertical Frequency 75 Hz(Max.) Video Signal Analog RGB (0.714 Vpp) 75 ohm Synchronous Signal Mode H, V Separate TTL Sync. Power Consumption Maximum 48 W Power Saving Mode Under 1 W Contol Key Front Part Audio Output MUTE, MENU/EXIT,SELECT/AUTO, POWER, – / Normal 1W / Ch Max 1.5W / Ch Power Supply Input : 100~240 Vac(50~60Hz), 0.6A Wall Mount VESA Standard Safety Standard&EMI Dimension Safety Standard UL, CE, TUV, CB EMI FCC, RRL Low Radiation MPR - II Size and Weight 380 X 171 X 417.5 / 5.8Kg ,+/ , VOL 13 TFT-LCD Monitor Pin assignment table D-Sub Mini 15pin connector Pin No. Assignment Red Video Green Video Blue Video N.C Ground Red Video Ground Green Video Ground Blue Video Ground 5V Input 10 Ground 11 Ground 12 SDA 13 H-Sync. 14 V-Sync. 15 SCL 10 11 15 (15 Pin D-Sub) 14 TFT-LCD Monitor Troubleshooting Problem Solution Power LED is dark. No picture. Check the power connection (Refer to Introduction) OSD, “check cable.” is displayed on the screen. Check the computer power is on. Message, “No cable.” is displayed on the screen. Check the signal cable between monitor and computer. (Refer to Introduction) Screen looks to be run down. Perform Auto-config. Remove attaches to the signal line(Video extension cable and others) and switch on. Perform Auto-config. Adjust clock and PHASE. Screen is not clear. Display is unstable and trembling. Check the resolution and frequency of computer and video card, and set up again refer to the current monitor mode and standard signal mode table. Color is irregular. Adjust COLOR at User Mode in OSD Color Menu. Check the resolution and frequency of computer and video card, and set up again in reference to the current monitor mode and standard signal mode table. Picture is dark. Adjust COLOR at User Mode in OSD Color Menu. Picture is biased or cut or too wide. Perform Auto-config. Power LED turns into Green blinking. Monitor is in DPMS mode. No SOUND. Check the voice signal connection code or adjust volume. Double images or ‘ghosts’. 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Create Date : 2003:01:30 05:36:50Z Modify Date : 2003:07:01 17:01:53+09:00 Creator : FrameMaker 5.5.6p145 Page Count : 15 Creation Date : 2003:01:30 05:36:50Z Mod Date : 2003:02:20 15:03:33+09:00 Producer : Acrobat Distiller 5.0 (Windows) Metadata Date : 2003:02:20 15:03:33+09:00 Title : model.book Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools