Hansol LCD B19AC 19" CCTV MONITOR User Manual USERS MANUAL

Hansol LCD Inc. 19" CCTV MONITOR USERS MANUAL

USERS MANUAL

Download: Hansol LCD B19AC 19" CCTV MONITOR User Manual USERS MANUAL
Mirror Download [FCC.gov]Hansol LCD B19AC 19" CCTV MONITOR User Manual USERS MANUAL
Document ID368496
Application IDayPbjDJ/FAyage6OT++ryg==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize121.03kB (1512860 bits)
Date Submitted2003-10-27 00:00:00
Date Available2003-10-24 00:00:00
Creation Date2003-10-15 17:32:54
Producing SoftwareAcrobat Distiller 4.0.5 for Macintosh
Document Lastmod2003-10-18 11:28:26
Document TitleUSERS MANUAL

User s Manual
TFT-LCD Color Monitor
H750V(B17AC) / H950V(B19AC)
Printed on the recyclable paper
Printed in Thailand
Part No. 942667020001 - 01
INFORMATION TO USER :
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and can
radiate radio frequency energy and,if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by determined by turning the
equipment off and on, the user is encouraged to try to crrent the interference by
one or more of the fllowing measures:
1. Reorient/Relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
Table of Contents
Parts
Connection to Signal Source
The range of control Angle
Name and Function of Front
Power Management Feature
Adjusting OSD
Standard Signal Table
22
Specification
24
Troubleshooting
26
Warning
28
3. Connect the equipment into an outlet on a circuit difference
from that to which the recerver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment
ENERGY STAR
As an ENERGY STAR partner, Hansol Electronics Inc.
has determined that this product meets energy Star guidelines
for energy efficiency.
Good Posture Guide
Parts
Place the monitor to face the user and then adjust the monitor angle.
Take a break (for about 10 minutes) at every hour during the work with monitor.
Refer to the following figure to take the correct posture.
about 50cm
Look down the monitor
below the horizon.
Adjust the monitor to
prevent reflection.
17 " LCD Monitor
19 " LCD Monitor
Relax shoulders and arms,
and sit back on the chair.
Adjust the monitor stand
to acquire required angle.
Maintain the arms horizontally
and place hands softly on
the keyboard.
Signal Cable
Stereo Cable(Option)
AC Power Cable
Keep feet flat on the ground.
User's Manual /
Warranty Card
2 - English
English - 3
Connection to Signal Source
Basic Connection
The range of control Angle
How to Adjust the Stand
Port for AC power cable.
Port for BNC output
Port for BNC input
Port for S-VHS input
Port for Audio input
Kensington Lock
Port for signal cable from signal source.
Forward 3
< Power source connection >
< Signal cable connection>
General
For Macintosh
Default
Adapter for Macintosh (Optional)
Refer to the table on the rear side of
the optional Macintosh adapter and
adjust DIP switch by the resolution.
1. Use 220 V or 110 V. (Free Voltage)
2. Connect monitor and Signal Source via Signal cable
3. Power on the monitor and computer.
4. Connection is finished.
4 - English
Backward 30
English - 5
Name and Function of Front
Front panel
Functions
Power button
Power button is located in the lower center of the Front Bezel.
You can push the button to turn on/off the power.
Power Indicating LED
Dark : Power off
Green : Normal mode
Green blinking : DPMS mode or Check Signal Cable mode.
17 " LCD Monitor
19 " LCD Monitor
On Screen Display (OSD) Function Button
OSD buttons on the front of bezel perform the following functions.
VOL / MUTE BUTTON
SOURCE BUTTON
MENU/EXIT BUTTON
/ + BUTTON
SELECT/ AUTO BUTTON
/ - BUTTON
POWER BUTTON
(Power indicating LED)
6 - English
SOURCE : Monitor displays source of the signal in order ( PC CVBS
S-VHS )
MENU/EXIT : Press this button to display menus. if you press this button when
OSD is displayed, you can switch display to the previous menu and
exit menu.
SELECT/ AUTO : Press this button, when OSD is not displayed, to perform
automatic setting. (only PC Mode.)
When OSD is displayed, You can select icons.
POWER : Power button.
+/
: By pressing these button when OSD is displayed, You can move
-/
cursor into the menus which you want.
After press the SELECT button, you can change gauge level or
select submenus.
When OSD is not displayed, you can adjust brightness or contrast.
VOLUME / MUTE : Press this button for volume control. when control is displayed,
You can control mute by pressing this button
English - 7
Power Management Feature
The monitor is equipped with a power saving circuit that
confirms to the world-standard Display Power Manager Signalling
(DPMS) mode of Video Electronics Standard Association (VESA).
The power management feature requires that the video card of the
computer should support DPMS function.
Status
LED Sign
Power Consumption
Normal mode
Green ON
Normal Power
DPMS mode
Green Blinking
3W or Below
DPMS with Audio
Adjusting OSD
-P C M O D E
Brightness / Contrast
MENU
SELECT
1. Press the MENU button to access main menu.
2. Use
to move Brightness / Contrast ICON.
3. Press SELECT button into the submenu.
Brightness
Mute ON
3W or Below
Mute OFF
5W or Below
SELECT
1. Use
to move Brightness ICON.
2. Press SELECT button to select it.
3. Use
to adjust the brightness of the screen.
No image is displayed with Green blinking.
Monitor is in power saving mode.
Use mouse or keyboard to release power saving mode.
No image is displayed without LED on.
Power cable plug must be pulled out.
Check the power plug on monitor and on the wall.
"Out of range" displayed on the screen.
This message is displayed when the signal from video card exceeds the
maximum frequency of the monitor. Readjust resolution and frequency in
accordance with the monitor capacity. (Refer to Standard Signal Table)
8 - English
Contrast
SELECT
1. Use
to move Contrast ICON.
2. Press SELECT button to select it.
3. Use
to adjust the contrast of the screen.
English - 9
Clock Phase
Phase
SELECT
MENU
1. Press the MENU button to access main menu.
2. Use
to move CLOCK PHASE ICON.
3. Press SELECT button into the submenu.
SELECT
to move Phase ICON.
1. Press
2. Use SELECT button to select it.
3. Use
to correct fine trembling or Video noise.
Horizontal Position
Clock
SELECT
1. Use
to move H-Position ICON.
2. Press SELECT button to select it.
3. Use
to adjust display left or right.
According to the characteristic of video card,
control range can be changed.
SELECT
to move Clock ICON.
1. Use
2. Press SELECT button to select it.
3. Press or
to remove vertical noise.
( Adjusting clock phase is required after the
adjustment of clock.)
Vertical Position
Color
SELECT
1. Use
to move V-Position ICON.
2. Press SELECT button to select it.
3. Use
to adjust display upward or downward.
According to the characteristic of video card,
control range can be changed.
10 - English
MENU
SELECT
1. Press MENU button to access main menu.
2. Use
to move Color ICON.
3. Press SELECT button into the submenu.
English - 11
OSD H-Position
Preset Color
MENU
SELECT
1. Use
to select the Mode 1, and Mode 2.
2. Press the Menu button to return previous state.
9300K : Slightly Bluish white.
6500K : Slightly Reddish white.
OSD V-Position
User Color
SELECT
MENU
1. Use
to move User color ICON.
2. Press SELECT button to select it.
3. Use
to increase or decrease each color.
OSD
MENU
SELECT
1. Use
to move OSD V-Position ICON.
2. Press SELECT button to select it.
3. Use
to adjust OSD upward or downward.
OSD Time
SELECT
1. Press MENU button to access main menu.
2. Use
to move OSD ICON.
3. Press SELECT button into the submenu.
12 - English
1. Use
to move OSD H-Position ICON.
2. Press SELECT button to select it.
3. Use
to adjust OSD left or right.
SELECT
1. Use
to move OSD Time ICON.
2. Press SELECT button to select it.
3. Use
to adjust OSD display time.
4. Press Menu button to return main menu.
English - 13
Special
MENU
SELECT
1. Press the MENU button to access main menu.
2. Use
to move Special ICON.
3. Press SELECT button into the submenu.
Auto-Config
Information
MENU
SELECT
1. Use
to move the Information ICON.
2. Press SELECT button to select it.
You can know display information
Accoding to the characteristic of video card,
display information can be incorrect
Language
MENU
Auto-Config
Sound
SELECT
MENU
1. Use
to move Language ICON.
2. Press SELECT button to select it.
3. Use
to select language.
SELECT
1. Use
to decrease or increase volume level.
2. Press SELECT button to select it.
3. Use
to control volume.
Factory
Auto-Config
Reset
SELECT
1. Use
to move the Factory Reset ICON.
2. Press SELECT button to return to default setting.
14 - English
English - 15
Adjusting OSD
-CVBS, SVIDEO MODE
Brightness / Contrast
MENU
Sharpness
(CVBS,SVIDEO Mode)
SELECT
SELECT
1. Press the MENU button to access main menu.
2. Use
to move Brightness / Contrast ICON.
3. Press SELECT button into the submenu.
1. Press the MENU button to access main menu.
2. Use
to move Sharpness ICON.
3. Press SELECT button to select it.
4. Use
to adjust the sharpness.
(Adjust the clearness of the screen)
Color
Brightness
SELECT
1. Use
to move Brightness ICON.
2. Press SELECT button to select it.
3. Use
to adjust the brightness of the screen.
Contrast
SELECT
1. Use
to move Contrast ICON.
2. Press SELECT button to select it.
3. Use
to adjust the contrast of the screen.
16 - English
MENU
SELECT
1. Press MENU button to access main menu.
2. Use
to move Color ICON.
3. Press SELECT button into the submenu.
HUE
(CVBS,SVIDEO Mode)
SELECT
1. Use
to select the HUE ICON.
2. Press SELECT button to select it.
3. Use
to adjust the hue.
English - 17
Saturation
OSD H-Position
SELECT
SELECT
1. Use
to select the Saturation ICON.
2. Press SELECT button to select it.
3. Use
to adjust the saturation.
Preset Color
1. Use
to move OSD H-Position ICON.
2. Press SELECT button to select it.
3. Use
to adjust OSD left or right.
OSD V-Position
MENU
SELECT
1. Use
to select the Mode 1, and Mode 2.
2. Press the Menu button to return previous state.
9300K : Slightly Bluish white.
6500K : Slightly Reddish white.
OSD
MENU
OSD Time
SELECT
1. Press MENU button to access main menu.
2. Use
to move OSD ICON.
3. Press SELECT button into the submenu.
18 - English
1. Use
to move OSD V-Position ICON.
2. Press SELECT button to select it.
3. Use
to adjust OSD upward or downward.
SELECT
1. Use
to move OSD Time ICON.
2. Press SELECT button to select it.
3. Use
to adjust OSD display time.
4. Press Menu button to return main menu.
English - 19
Auto-Config
Information
Special
MENU
SELECT
1. Press the MENU button to access main menu.
2. Use
to move Special ICON.
3. Press SELECT button into the submenu.
MENU
SELECT
1. Use
to move the Information ICON.
2. Press SELECT button to select it.
You can know display information
Accoding to the characteristic of video card,
display information can be incorrect
Language
Auto-Config
Sound
MENU
SELECT
1. Use
to move Language ICON.
2. Press SELECT button to select it.
3. Use
to select language.
MENU
SELECT
1. Use
to decrease or increase volume level.
2. Press SELECT button to select it.
3. Use
to control volume.
Factory
Auto-Config
Reset
SELECT
1. Use
to move the Factory Reset ICON.
2. Press SELECT button to return to default setting.
20 - English
English - 21
Standard Signal Table
Pin assignment table D-Sub
Mini 15pin connector
PC Supported Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Clock Frequency
(MHz)
VGA
(720 X 400)
31.469
70.087
28.322
VGA
(640 X 480)
31.469
59.940
25.175
VGA
(640 X 480)
37.500
75.000
31.500
SVGA (800 X 600)
37.900
60.320
40.000
SVGA (800 X 600)
46.875
75.000
49.500
XGA (1024 X 768)
48.363
60.004
65.000
XGA (1024 X 768)
60.023
75.029
78.750
SXGA (1280 X 1024)
63.981
60.020
108.000
SXGA (1280 X 1024)
79.976
75.025
135.000
MAC (640 X 480)
35.000
66.667
30.240
MAC (832 X 624)
49.726
74.551
57.284
MAC (1152 X 870)
68.681
75.062
100.000
Pin No.
Assignment
Red Video
Green Video
Blue Video
N.C
Ground
Red Video Ground
Green Video Ground
Blue Video Ground
Pin No.
10
11
12
13
14
15
Assignment
5V Input
Ground
Ground
SDA
H.Sync
V.Sync
SCL
10
11
15
15pin D-Sub
DVR Supported Mode
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Clock Frequency
(MHz)
NTSC 1 (616 X 452)
31.469
59.940
24.5454
NTSC 2 (680 X 452)
31.469
59.940
27.000
PAL 1 (736 X 544)
31.250
50.000
29.500
PAL 2 (680 X 544)
31.250
50.000
27.000
22 - English
English - 23
Specification
Model
LCD
Panel
H750V(B17AC
Amorphous active matrix super TFT LCD
Type
Amorphous active matrix super TFT LCD
43.2cm (Diagonal)
Screen Size
48.3cm (Diagonal)
Maximum Resolution
1280 X 1024 @ 75 Hz
Maximum Resolution
1280 X 1024 @ 75 Hz
Pixel Range
0.264 mm X 0.264 mm
Pixel Range
0.294 mm X 0.294 mm
Display Colors
16.7M Color
Display Colors
16.7M Color
Contrast Ratio
350 : 1
Contrast Ratio
500 : 1
Viewing Angle
70° / 70° / 60° / 60° (Left / Right / Up / Down)
Viewing Angle
85° / 85° / 85° / 85° (Left / Right / Up / Down)
Response Time
25 msec
Response Time
25 msec
Luminance
250 cd/m
Luminance
250 cd/m
79.9kHz (Max.)
Horizontal Frequency
79.9kHz (Max.)
Maximum
48W
Maximum
48W
75 Hz (Max.)
Under 3W
SOURCE, MENU / EXIT, AUTO/ SELECT,POWER,
-/ , +/ , VOL/MUTE
Video : Analog RGB(0.714Vpp)75ohm,
Input
Composite in (BNC),S-VHS in
Audio : Stereo in
Synchro
nization Vertical Frequency
Power
Consumption Power Saving Mode
Control key Front Part
Input
Signal
75 Hz (Max.)
Under 3W
SOURCE, MENU / EXIT, AUTO/ SELECT,POWER,
-/ , +/ , VOL/MUTE
Video : Analog RGB(0.714Vpp)75ohm,
Input
Composite in (BNC),S-VHS in
Audio : Stereo in
Connector
15-pin Mini D-sub, Stereo, S-VHS, BNC *2
Connector
15-pin Mini D-sub, Stereo, S-VHS, BNC *2
Output
Video Composite out(BNC)
Output
Video Composite out(BNC)
IBM
VGA,SVGA,XGA,SXGA
IBM
VGA,SVGA,XGA,SXGA
Video
NTSC/PAL standard
Video
NTSC/PAL standard
Normal&Ergonomic Modes
Normal
Audio
Output
Max
Power Supply
Wall Mount
Safety Standard
Safety
Standard EMI
& EMI
Low Radiation
Dimension Size and Weight
24 - English
LCD
Panel
Horizontal Frequency
Control key Front Part
Compati
bility
H950V(B19AC
Screen Size
Power
Consumption Power Saving Mode
Output
Signal
Model
Type
Synchro
nization Vertical Frequency
Input
Signal
Specification
1W/Ch
1.5W/Ch
Input : 100-240Vac (50/60 Hz), 0.6A
VESA Standard
UL, CE(LVD),
FCC,CE(EMCD)
380 176 368 / 5.8kg
Output
Signal
Compati
bility
Normal&Ergonomic Modes
Normal
Audio
Output
Max
Power Supply
Wall Mount
Safety Standard
Safety
Standard EMI
& EMI
Low Radiation
Dimension Size and Weight
1W/Ch
1.5W/Ch
Input : 100-240Vac (50/60 Hz), 0.6A
VESA Standard
UL, CE(LVD)
FCC,CE(EMCD)
418 200 437.2 / 6.3kg
English - 25
Troubleshooting
Power LED is dark.
No picture.
Check the power connection.
(Refer to page 4)
Color is irregular.
Adjust COLOR at User Mode in OSD Color
Menu.
OSD, "check RGB
( CVBS, SVIDEO)"
is displayed on the
screen.
Check the signal cable or signal Source.
(Refer to page 4)
Double images or
'ghosts'.
Check the resolution and frequency of
computer and video card, and set up
again in reference to the current monitor
mode and standard signal mode table.
Screen looks to be run
down.
Perform Auto_config.
Screen is not clear.
Remove attaches to the signal line
(Video extension cable and others)
and switch on.
Perform Auto-config.
Adjust clock and PHASE.
Picture is dark.
Picture is biased or cut
or too wide.
Power LED turns into
Green blinking.
Display is unstable and
trembling.
26 - English
Check the resolution and frequency of
computer and video card, and set up
again refer to the current monitor
mode and standard signal mode table.
NO SOUND
Adjust COLOR at User Mode in OSD Color
Menu.
Perform Auto-Config.
Monitor is in DPMS mode.
Check the voice signal connection code or
adjust volume.
English - 27
Warning
To prevent damage or loss, please read this warning carefully.
When connecting/disconnecting the plug, pull out
the plug itself, and never pull the cord to prevent fire
caused by short.
To prevent electric shock, do not connect/disconnect the plug with wet hand.
If you see smoke or smell something burning, stop
using the unit, switch off the power, pull out the plug,
and then contact your local service station.
To prevent fire, do not connect a large number of
equipments in a single line.
To prevent fire and electric shock, pull out the plug in
case of thunder and lightening.
To prevent fire and electric shock, do not try to take
the monitor apart or repair it yourself. Contact your
local service station or customer service center for
inspection, modification or repair.
28 - English
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2003:10:15 17:32:54
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Modify Date                     : 2003:10:18 11:28:26+09:00
Page Count                      : 16
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MSAB19AC

Navigation menu