| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 319052 |
| Application ID | N77ULKlg4j9N+l7/ilPjbg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 86.17kB (1077126 bits) |
| Date Submitted | 2003-04-17 00:00:00 |
| Date Available | 2003-04-17 00:00:00 |
| Creation Date | 2003-04-11 11:48:19 |
| Producing Software | Acrobat PDFWriter 4.05 for Windows |
| Document Lastmod | 2003-04-11 11:47:20 |
| Document Title | æ¯íŽ˜ì´ì§€) |
| Document Creator | æ¯ì¸ì‡„3.TIF (13 페ì´ì§€) |
| Document Author: | æ¯Seo |
Hansel Electronlce Inc.
INFORMATION TO USER :
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provlde reasonable protection against harmful
interference in a residential installationThis equipment generates. uses and can
radiate radio frequency energy and,if not installed and used in accordance with
the instructions. may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by determined by turning the
equipment off and on, the user is encouraged to try to crrent the interference by
one or more of the fllowing measures:
1. ReorientIRelocate the receiving antenna.
2. increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit difference
from that to which the recerver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user‘s
authority to operate the equipment
ENERGY STAR
As an ENERGY STAR partner, Hansel Electronics Inc.
has determined that this product meets energy Star guidelines
for energy efficiency.
Table of Contents
Connection to Signal Source
lherangeotcontrol Ang|g
instaliiruMonltorD'ivef
Nameand Function of Front
F'wrerManagemcmFeanxe
Misfire OSD
HotKay
StandardsignalTable ........
Specification -
Troubleshodtrg
Warning
Good Posture Guide Parts
0 Flece he monitor to face the user and than adjus1 me monitorangla.
' Take a break (for abwt 10 minutes) at every hour during the work with monitor.
0 Refer lo Ihe kmowing figure w lake the correct posmre.
. Look down the monitor
below the horizon.
a Adjust the manner m
Prevent reflection.
. Relax shoulders and arms.
and sit back on the chair,
0 Adjust the mcnnor sand
to acqulre required angler 5 ‘w
. Malmain the anus honznntauy Sign“, cable (Arabs) Stereo QWOM' AC PW" came
and place hands somy on
me keyboard.
0 Keep feet flat on the ground. @ §
Users Manual 1 rm mam -
Warranty Card S¢gnal Cable (DVI)
2 - English English - 3
Connection to Signal Source The large of omtrol Angle
7 How to Adjust the Stand
/®mearAcw~ercaue
(2meme Manicures.
®meorHeadthaorExwml Speaker
©Porliorslgnal cablelmm DVI signal source
©KemingtmLmk
®measigna|edxefimnsmbgslgnalsou )
‘\—_“___/
A Forward 3°
< Power source connection > < Signal cable connectlon>
> General
, 01239- mmo=f
, <—
?4_~__<
‘1
“3 fig > For Madnwsh A Default
J" «3-.me
1, Use 220Vor110v, (Free Voltage)
2. Connect monitor and Signal Source vla Signal cable A Backward 30 .
3. Power on me momlar and computer.
4. Connection is finished.
4 - English English - 5
Instaliing Monitor Bri Aer
(3) cm mnmf.
@ Clidr Warmed
1. Insert the Diskeme lo the Fbppy Diskette driver.
2. D0ub|8~click “Installexe”.
3. Salem the model and click “OK“ button
4, Salem in! file. and then click "OK" button.
* =
5. Click "Exn' button to close the installation. a!) CM “inlays m MM DCick'Hm Dlsk -.
(9) Dick ‘Nex|>'
“magmas! ->
1. Insert lhe Diskette to the Floppy Diskatle driver.
®cm< ‘NuxP'.
2, Click 'My Computer and lollcm the procedure below. ® Sew m Maud “won
® cm Nexb' ob cick 'Finish'.
{DOM lcwm' yam" “2 CM law“ Q wk sms" 34 Selem "Exil‘ it me monltor model is changed, and men reboot the Windows,
6 - English English - 7
MENU/Exn' BUTTON
s - English
SOURCE BUTTON
SELECT/AUTO BLI'I'I‘ON
POWER Bu'l'roN
(Puwev inflcalmgLED)
and Function of Front
VOL [MUTE BUTTON
0“an
it»! - BUTTON
0 Power bullion
Powe'r bunon ls lowed in the lower cemer of lhe anl Bezel.
You (an push me button lo tum cnloll the power.
0 Power Indicating LED
0 Dark * Power all
0 Green 4 Normal mode
a Green blinking : DPMS mode or Check Signal Cable mode,
0 On Screen Display (OSD) Function Button
OSD humans on me from of bezel perionn the following functions.
0 SOURCE : Press mis mm in change Analog/DVI display.
Q MENU/EXIT : Press this human to display menusl ifyou press lnis bunon Mien
OSD ‘sdisplaysd. you can swim display lo me previous Maud
exit menu.
0 SELECT! AUTO : Press this human. when OSD is not d'splayed, ID perfum
aulomalic selling.
when OSD is dsplayed, You can selecl Icons.
0 POWER: Power button
. dd w ; By pissing mm button when 030 is displayed, Vou can move
cursor inln the menus Mild/i you wanl.
Adler press the SELECT lumen. you can change gauge level or
selec1 submsnus.
When oso is net displayed, you ran adiust brighlness or contrast.
0 VOLUME / MUTE : Press ih's blmon fwvo’urne ecmml, when oonlrol is displayed,
You can eomml mule by pressing lhis union
English - 9
Power Management Feature
The monitor |s equipped with a power saving circuit that
confirms to me world-standard Display Power Manager Signalling
(DFMS) mode of Video Electronics Standard Association (VESA).
The pwwer management feature requires that the video card nftne
computer should support DPMS function.
Status LED S 9
Power Consump
Normal mode Green ON Normal Power
DPMS mode Green Blinking 1W Of Bel0w(Analog)I
3.5W or BelorwiDVl)
Mute ON 1W or Below(Analog)/
35W or Below(DVl)
Mule OFF 10W or Below
10 - English
Adjusting OSD
MENU -> — + -> SELECT
it Press the MENU mm In access main menu.
2. use ~ ,+ [0 mo“ Inwl source ICON
3. Press SELECT billion into the submenu.
— + " SELECT
1. Use —.+ to mvve Digital input ICON.
2 Press SELECT button to select Dvl display
— + -> SELECY
1. Use — ,+ u: «love Analog input ICON.
2. Press sstcr bullm to select Analog display.
English - 11
*‘ ' Bnghinéss- Kfféfifrast
MENU» — + -> SELECT
1. Puss Ihe MENU human Ioawesu main menu.
2. Use » ,+ m mm Bngmmss and Conn-m ICON.
3, Prese SELECT human intethe submenu.
mfigfitfie w...
_+ ->sELECT->—+
7 Submenu
L Use - ,f In mm Brithmss noon,
2 Pines sascr human m salecl n.
3.1)“ A ‘f comm me brawn-u,
. r:
© Brightness an Conlrasl WSE
Submenu
— + ->ssLEc‘r -> — +
1, Use - ,+ to move Comma ICON.
2 Press SELECT button m m ll.
3. Use - .* yo adjnsl me pummel,
12 - English
MENU -> — + ->SELECT
1. Press me MENU button 00 access main menu
2. Use — j m move Clack Phase ICON.
3 Pres sELEcr button into me submunu.
—+ ->ssLecr -> —+
L Use — ,+ 00 move H-Posihon ICON.
z. Puss SELECT human w sol-ct n.
3. Use - ,+ w mus: display wen wright.
—+->SELECT ->—+
1. Use — ,+ w moveV~PasiliM won.
2. Press SELECT bmwn to select it,
3. Use — ,‘ to mun display upward or dwnwud.
English - 13
WWa
Q Clock Phase Submenu
—+->SELEDY->—+
1v Press - ,+ to mm- Clock Phiss room
2 Use SELECT bullon w sum it,
3, Use - ,+ w carved fine rumbling or Video miss.
631i“
O Clock Phase Submenu
—+-—sELEcT-— —+
|. Uxa , ‘+ we move Clock ICON.
2. Press sELEcT human w select it.
3. Press - or e mums mm min.
4Mjusmg sock phase rs muired anerme
amustmem cf clock.)
MENU —> — + ->$ELECT
1 Press MENU Milton In access main menu
2. Use — _+ m rrme color loom
34 Press SELECT button No (he swmonu.
14 - Eng|ish
— + -> MENU
6 Color Submenu
1, Ux - 3- &0 mm in 6500K,nm1 93mm.
1 Press Ihe Mmu Mm to return previous stem.
was wai-
® Color Submenu
— +->SELECT —> — + ->MENU
1. Use , e a» move User eolor men.
2. Press SELECT human in scluclil.
3 Use - f In sm lh' Cokw whar you want.
4. Use “Incl human m also! it.
5 Use - ,+ to morass or decrease each new,
er Press me menu human m return previous state.
MENU —> — + ->SELECT
1A Prat! MENU mun «a recess main menu,
2‘ use » ‘1- on man Spuul ICON.
Dr) Jj (D (5:1) @ ‘ 1 Press SELECY button mm the submenu,
English - 15
”WW
MENU -> — + -> SELECT» — +
@ Special Submenu
|. Use ~ 3 to mm Language noon.
. z. Puss SELECT button hselect u.
swans _ - wnlecllan uage,
LANGUE 3 USE '+ E
mlouA
UNGUA
fictorfieset '
— + -> SELECT
1. Use - ,+ to move ma Funny Reset IOON,
2. Press SELECT human brain"! to Mann surfing.
mum ussn
0 Specia‘ Submenu
menu -> — + -> SELECT
1. Use ~ ,+ no rims mo IMmmauon ICON.
H . 64 IKHZ V: 6 2HZ > 2. Press SELECT button to select it.
MODEL H7sonoao|u5
x Accoding to the characteristic 0! video card.
display information can be inoofrecl
16 - English
6 Specie! Su brnenu
~ + ‘SELECT -> — +
1. Use — _+ to move OSD H~Posnian ICON.
2. Press SELECT bunnn m select it
3. Use — ,+ in adjust OSD len or right.
— + ->5EI.ECT-> — +
v. Use - ,+ we mm 050 V-Pomtion ICON.
1. may SELECT button to snhct n.
3. Use — ‘+ no adjust osn upward of downward.
Q Special Submenu
— +~ssLscT -> — +
1. Us. — V+W move 0517 Time ICON.
2 Press SELECT button to salad it.
3. Use » y w adjun1 osD disptay rims.
English ~ 17
HOT KEY
. a A1 noteh‘ ‘
MENU -> — + -> SELECT or
VOL BUTTON
1‘ Use A “+10 Irma Sound ICON. 1 When change DVI display inlo Analog dismay. select source button located in I'm Isilv
27 Pm; SELECT Mm lo “1m in Analog display wlll be snowed ansr Analog mpm message.
3. Use — ,+ no comm! vomme.
4, pm, MENU Mm k, mm. mm,“ 5m, 2, When mango Analog mspuy into DVI display‘ selecl some bullon located in me ML
ow dismay will he showed any DVI inpul massago.
3. No signs! input massage win be d
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.3
Linearized : No
Creator : .歯.인쇄3.TIF (13 페이지)
Create Date : 2003:04:11 11:48:19
Title : .歯.페이지)
Author : .歯.Seo
Producer : Acrobat PDFWriter 4.05 for Windows
Modify Date : 2003:04:11 11:47:20+09:00
Page Count : 13
EXIF Metadata provided by EXIF.tools