Hansol LCD D17DL Monitor User Manual 720D

Hansol LCD Inc. Monitor 720D

users manual

Download: Hansol LCD D17DL Monitor User Manual 720D
Mirror Download [FCC.gov]Hansol LCD D17DL Monitor User Manual 720D
Document ID250601
Application IDxOIgcP3LNqUqpcGvMi9aug==
Document Descriptionusers manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize39.86kB (498238 bits)
Date Submitted2002-06-17 00:00:00
Date Available2002-06-12 00:00:00
Creation Date2002-06-04 16:45:02
Producing SoftwareAcrobat Distiller 4.0.5 for Macintosh
Document Lastmod2002-06-11 14:29:05
Document Title720D¿µ¾î
Document CreatorQuarkXPress: PSPrinter 8.3.1
Document Author: ¾ç

FCC Information
This equipment has been tested and found to comply with limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment can generates, uses, and radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful inteference to radio
Communications. However, there is no guarantee that interference will not occur in a particular
installation.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced Radio/TV technician for help.
Package
Safety Information
Features
Power management system
Installation
Connection to your personal computer.
Pin assignment table D-sub mini 15 pin connector
Controls
OSD Controls
OSD Menus
English
If this equipment does cause unacceptable interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
Introduction
Troubleshooting
No picture
Image is scrolling or unstable
Picture is fuzzy
Picture bounces or a waving pattern is present in the picture
Edges of the display image are not square
Display image is not centered, too small, or too large
12
12
12
12
12
12
Specifications
ENERGY STAR
As an ENERGY STAR partner, Hansol Electronics Inc. has determined that this product meets
energy Star guidelines for energy efficiency.
Electrical specifications
Mechanical specifications
Environmental specifications
13
13
13
Appendix
Preset Timings
14
Caution
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Canadian Notice
This Class B digital apparatus meets all requirements of the Canadian
Interference Causing Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
Notice
The information contained in this document is subject to change without notice.
User’s Manual
User’s Manual
Introduction
Introduction
Features
Congratulations on your purchase of this top quality color monitor!
The items illustrated below are contained in the carton.
First, be sure that your carton includes all of them.
If any items are missing or damaged, please contact your local dealer or supplier.
Superior image
On Screen menu fingertip control system to visually select and adjust screen using buttons
on front panel and on screen menus.
The exclusive double dynamic focus system with a hyperbolic focus compensation circuit
controls the electron beams resulting in a fine image display over the entire area of the
screen.
Super contrast screen for superior contrast and richer color.
Advanced INVAR Shadow mask for superior focus, brightness and color.
17", 0.25(D)/0.20(H)dot pitch high resolution, non-interlaced technology provides sharp,
flicker-free images.
On screen menu color control system easily allows the white of the image to be adjusted as
well as R.G. B signals, resulting in true-to-life colors.
Display Monitor
AC Power Input Cable
Safety information
Provided with this monitor is a detachable power supply cord with IEC320 style terminations.
It may be suitable for connection to any UL listed personal computer with similar
configuration. Before making the connection ensure that the voltage rating of the computer
convenience outlet is the same as the monitor and that the ampere rating of the computer
convenience outlet is equal to or exceeds the monitor current rating.
For 120Volt applications use only UL listed detachable power cord with NEMA configuration
5-15P type(parallel blades) plug cap.
For 240Volt applications use only UL listed detachable power cord with NEMA configuration
6-15P type(tandem blades) plug cap.
Use only a power source and connection appropriate for the monitor as indicated on the
marking label.
Slots and openings in the cabinet are provided for ventilation;
these openings must not be blocked or covered. Never push objects of any kind into cabinet
slots or other openings.
Never insert anything metallic into the monitor openings.
Doing so may create a danger of electric shock.
To avoid electric shock, never touch the inside of the monitor.
Only a qualified technician should open the monitor s case.
Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp, lint-free cloth for cleaning.
Install the monitor near an outlet that you can reach easily. Disconnect the product by
grasping the plug firmly and pulling in from the outlet.
Never disconnect it by pulling the cord.
User’s Manual
Ergonomic Design
Flat, square screen to reduce image distortion and glare, thus relieving eye strain.
Tilt base allowing 90 rotation in the horizontal and 17 in the vertical for greater user comfort.
Low-leak radiation prevention meeting MPR I and the very stringent TCO (option) magnetic
field emissions standards for increased user safety.
Environmentally Friendly
Power management circuit conforming to VESA DPMS standards controls energy
consumption when monitor is not in use, you save energy.
All plastic parts are recyclable. All materials are strictly selected to ensure ease of
maintenance, inspection and disposal.
Timing
Automatic tracking of horizontal frequencies of 30 to 95 kHz,and vertical frequencise of
50 to 160 Hz.
Ten timings are factory preset for image size and position
Ten additional timings are user definable.
Synchronizing input signals (separate, composite) can be automatically selected.
User’s Manual
ENGLISH
Package
Installation
Introduction
System Flexibility
Monitor may be used with IBM or compatible PC, MAC.
CAUTION
Ensure that both the PC and the display monitor are switched off.
Automatic universal power supply is built in permitting AC power input of 100 - 240V AC,
50 or 60Hz.
Self-test menu allows the display unit to be checked on screen without connecting to a
computer.
Compact case minimizes desktop space giving you a large screen image without loss of
workspace.
Power cable included easily plugs into a standard outlet.
To attach the monitor to your system, as
shown in the following illustrations.
1. Insert the AC power cord
into monitor
and then into an AC power outlet.
2. Connect the signal cable
to the 15pin
graphics connector of the system and
tighten the fastening screws.
Power management system
3. To turn on the monitor, push the power
switch.
This monitor complies with VESA, Nutek, and Energy Star power saving requirements. The
power saving system works only when used with VESA DPMS compliant PC’s and/or graphic
controllers.
Note : To attach the monitor to the Macintosh system, please contact an authorized
dealer.(Need to use a special adaptor)
State
On
LED
Green
Power
Normal (100 Watts)
Stand by
Off
Green
Green/Blink(1 Sec)
Recovery Time
N/A
65 Watts
2 Sec
5 Watts
15 Sec
The monitor goes into various power saving stages depending on the incoming
video signal as shown in the following table
State
Horizontal Sync
Vertical Sync
On
Stand by
Off
On
Off
Off
On
On
Off
Note
The monitor automatically goes through the DPMS steps when it is idle.
To release the monitor from the DPMS condition, press any key on the keyboard or mouse.
ENGLISH
Connection to your computer
Equipped with DDC1, DDC2B and DDC2Bi for Plug & Play compatibility.
Monitor is compatible with VGA, SVGA, VESA and high resolution video modes up to
1600(H) 1200(V) @ 75Hz
User’s Manual
Pin assignment table D-Sub Mini 15pin connector
Pin No.
10
11
12
13
14
15
Assignment
Red Video
Green Video
Blue Video
Frame Ground
Ground
Red Video Ground
Green Video Ground
Blue Video Ground
N.C
Sync. Ground
Ground
SDA
H-Sync.
V-Sync.
SCL
The 15-pin D-Sub connector
(male) of the signal cable
(IBM Systems) :
10
11
15
(15 Pin D-Sub)
User’s Manual
Controls
Controls
OSD Menu
"ON SCREEN MENU" controls include the following extended controls such as Size, Position,
Geometry, Color Adjust, Brightness and Contrast Utilities. Adjustments are saved instantly. The
currently addressed control can be reset to factory settings by pressing the Reset button.
OSD MENU
Proceeds to NO.2
Proceeds to
NO.3
2. MAIN MENU
The function with RED
ICON is
- Performed : Recall,
Degauss
- Selected and blinked
: Color Adjust, Zoom
- Proceeded : Others
Moves to function you want.
Exit to No.1
3. BRIGHTNESS
Moves to No.2
Decreases the Increases the
brightness
brightness
Exit to No.1
4. CONTRAST
Moves to No.2
Decreases the Increases the
contrast
contrast
Exit to No.1
5.H/V-POSITION
Toggles horizontal or
vertical position
Moves the
image down or
left in the
selected
function.
Moves the
image up or
right in the
selected
function.
Exit to No.2
6. H/V-SIZE
Toggles horizontal or
vertical size
Shinks the
image in the
selected
function.
Expands the
image in the
selected
function.
Exit to No.2
7.GEOMETRY
Odd press
Controls the amount of the
Exit to No.2
: Selects and blinks the Selected funcion. (Refer to Geofunction with RED ICON metry controls menu in detail)
Function of OSD buttons on the front of the monitor
: In the main menu, exits the OSD controls. In a submenu, exits to the OSD main menu.
/+
1) When no OSD on the Screen,
: Direct access to Brightness controls.
+ : Direct access to Contrast controls.
2) When Main menu is displayed. : Moves to function what you want to adjust.
3) When the Sub menu is displayed. : Controls the amount what you want to adjust.
MENU : Displays OSD main Menu.
1) When Main menu is displayed. : Selects function with RED ICON.
MENU
1. NO OSD
Proceeds to
NO.4
No meaning
2) When Sub menu is displayed. : Selects function with RED ICON.
Additional front controls
Power Switch : Turns the monitor power on or off. When the power is on, the LED is on.
LED Power indicator Light : Located left side of the power switch and indicates the monitor's
power mode. Each mode reduces the amount of power used by the monitor.
Accessing on screen menu
Press MENU Button.
Turning off on screen menu
When in the main menu, press
When in submenus, press the
button.
button twice.
Even press
Moves to function you want.
: Stops blinking and
ready to move function
you want.
User’s Manual
Exit to No.2
User’s Manual
ENGLISH
OSD controls
Controls
Controls
MENU
OSD MENU
Odd press
Contros the amount of the selected Exit to No.2
: Selects and blinks the function. Please control these key
function with RED ICON in order the image not to shiver.
13. ZOOM
Even press
Moves to function you want.
: Stops blinking and
ready to move function
you want.
9. LANGUAGE
Selects the languages
with RED ICON and
Exit to No.2
Moves to language you want.
Recall (
Toggles OSD position Moves the OSD
horizontally or vertically. menu left or
down in the
selected
function.
Moves the OSD
menu right or
up in the
selected
function.
Exit to No.2
Caution
11. COLOR MODE
Odd press
: Blinks the RED ICON
- color menu ICON.
Moves to color mode you want
and the selected “color mode”
will blink.
Even press
Moves to function you want.
: Stops blinking and
ready to move function
you want.
When the color mode
ICON is blinking in user
mode, press, then go to
color adjust mode
No.12.
12. COLOR ADJUST
MODE
RB - Red background raster
GB - Green background raster
BB - Blue background raster
RG - Red level gain
GG - Green level gain
BG - Blue level gain
10
User’s Manual
Shinks the
image
horizontally
and vertically.
Expands the
image
horizontally
and vertically.
Exit to No.1
Even press
: Stops blinking and
ready to move another
function.
Moves to the function you want. Exit to No.1
Exit to No.2
Degauss (
10. OSD POSITION
MENU
Odd press
: Selects zoom and
blinks the zoom ICON.
ENGLISH
OSD MENU
8. MOIRE
Exit to No.1
Exit to No.1
Exit to No.11
Even press
Moves to the function you want.
: Stops blinking and
ready to move function
you want.
Exit to No.11
) : Eliminates the build-up of stray magnetic fields which alter the correct scan of the
electron beams and affect the purity of the screen colors, focus, and
convergence. When pressed, you screen image will jump and waver a bit as the
screen is demagnetized.
: Please allow aminimum of 20 minutes to elapse between uses of the Degauss
button. Do no hold the button down continuously to avoid decreasing the life the
Deguass circuitry.
Geometry Controls Menu
The Geometry controls allow you to adjust the curvature or angle
of the sides of you display.
Odd press
Controls the amount of function
: Selects and blinks the you want.
function you want.
: Recall control to the factory setting resets all the controls within the all menu.
If you want to return to the factory mode setting, press Recall key 5~8 Sec
continuously.
Pincushion
: Increases or decreases the curvature of the sides either inward or outward.
Parallelogram : Increases or decreases the tilt of the sides either to the left or right.
Trapezoid
: Increases or decreases the bottom of the screen to be the same as the top.
Pin Balance
Rotation
: Increases or decreases the curvature of the sides either to the left or right.
: Increases or decreases the tilt of the screen image relative to a horizontal line.
User’s Manual
11
Troubleshooting
Electrical Specifications
Check that the AC cord is correctly connected.
Check that the AC socket is live by plugging in another piece of equipment.
Power switch and computer power switch should be in position.
Ensure that the signal cable is properly connected to the video card or PC.
Ensure that the video card is securely seated in the PC.
Check the connector for bent or pushed-in pins.
Press a key on the keyboard or move the mouse, in case the screen power-saver mode has
blanked the screen.
D17DL
ITEM
720D
CRT Type
17 , 90 deflection FLAT
CRT Horizontal Dot pitch
CRT Surface
Sync
Input
Signal
Video
Image is scrolling or unstable
Signal cable should be securely attached to the computer.
Check the pin assignments and signal timings of the monitor and your video card with
respect to recommended timings and pin assignments.
Ensure that the video card is securely seated in the PC.
Picture is fuzzy
Adjust the Contrast and Brightness Controls.
Push the Degauss Button once.
Caution : A minimum interval of 20 minutes should exist before the Degauss Button is used a
second time. Do not hold the button down continuously.
Horizontal
Scanning
frequency
Vertical
Maximum Resolution
0.20mm
Non-glare, Anti-Reflection & Anti-Static
H/V Separate, TTL, positive/negative
H/V Composite, TTL, positive/negative
RGB Analog (0.7Vp-p), positive
75
Terminated
30KHz~95KHz (Automatically)
50Hz~160Hz (Automatically)
1600Dots 1200Lines (Non-interlace)
Pixel Clock(Max.)
157.8 MHz
Display Size (Standard)
Horizontal 306mm, Vertical 230mm
Power Consumption(Max.)
Power Supply
100 Watts
3Hz
AC 100~240Volt, 60/50Hz
Input Connector
D-Sub, 15Pin Connectors
Display Colors
Unlimited
Mechanical Specifications
D17DL (720D)
ITEM
Picture bounces or a waving pattern is present in the picture
Move electrical devices that may be causing electrical interference away from the monitor.
See the inside front cover of this manual for FCC information.
Unshielded audio speakers placed next to the monitor can cause picture distortion. Move
the speakers away.
ENGLISH
No picture
Specifications
Unit
16.5 (W) 16.7 (D) 16.5 (H)
418mm(W) 424mm(D) 420mm(H)
Dimension
Carton
Weight
20.7 (W) 20.7 (D) 20.6 (H)
525mm(W) 526mm(D) 523mm(H)
Net
37.5Ibs (15.9Kg)
Gross
42.0Ibs (18.7Kg)
Edges of the display image are not square
Adjust the distortion using the Side Pincushion or Trapezoid Pincushion Balance, Parallel
adjustment controls under the on screen menu.
Environmental Specifications
ITEM
Display image is not centered, too small, or too large
Adjust the horizontal and vertical image sizes using the Horizontal and Vertical Size
adjustment controls under the on screen menu.
12
User’s Manual
Temperature
Operating
Storage
Humidity
D17DL (720D)
32 F to 104 F (0 C to 40 C)
-4 F to 140 F (-20 C to 60 C)
10% to 85% R.H. Non-condensing
User’s Manual
13
Appendix
Preset Timings
This Monitor D17DL has preset modes for the 10 most popular industry standards for Plug and
Play capability.
Horizontal
Video
Video
Sync
Sync
Resolution
Timing
H-Freq(kHz)
A sec
B sec
C sec
D sec
E sec
V-Freq(Hz)
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate(MHz)
H-Polarity
V-Polarity
Resolution
Timing
H-Freq(kHz)
A sec
B sec
C sec
D sec
E sec
V-Freq(Hz)
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate(MHz)
H-Polarity
V-Polarity
14
Vertical
IBM
VGA/70Hz
720 400
31.469
31.777
3.813
1.907
25.422
0.636
70.09
14.268
0.064
1.08
12.711
0.413
28.322
Negative
Positive
VGA/60Hz
640 480
31.469
31.777
3.813
1.907
25.422
0.636
59.94
16.684
0.064
1.048
15.253
0.318
25.175
Negative
Negative
640/85Hz
640 480
43.269
23.111
1.556
2.222
17.778
1.556
85.008
11.764
0.069
0.578
11.093
0.023
36
Negative
Negative
800/75Hz
800 600
46.875
21.333
1.616
3.232
16.162
0.323
75
13.333
0.064
0.448
12.8
0.021
49.5
Positive
Positive
VESA
1024/85Hz 1280/75Hz 1280/85Hz 1600/75Hz
1024 768 1280 1024 1280 1024 1600 1200
68.677
79.976
91.146
93.75
14.561
12.504
10.971
10.667
1.016
1.067
1.016
0.948
2.201
1.837
1.422
1.501
10.836
9.481
8.127
7.901
0.508
0.119
0.406
0.316
84.997
75.025
85.024
75
11.765
13.329
11.761
13.333
0.044
0.038
0.033
0.032
0.524
0.475
0.579
0.491
11.183
12.804
11.235
12.8
0.015
0.013
0.011
0.011
94.5
135
157.5
202.5
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
User’s Manual
VESA
800/85Hz
800 600
53.674
18.631
1.138
2.702
14.222
0.569
85.061
11.756
0.056
0.503
11.179
0.019
56.25
Positive
Positive
640/67Hz
640 480
35
28.571
2.116
3.175
21.164
2.116
66.667
15
0.086
1.114
13.714
0.086
30.24
Negative
Negative
1024/75Hz
1024 768
60.023
16.660
1.219
2.235
13.003
0.203
75.029
13.328
0.050
0.466
12.795
0.017
78.750
Positive
Positive
MACINTOSH
832/75Hz
832 624
49.726
20.11
1.117
3.91
14.524
0.559
74.551
13.414
0.06
0.784
12.549
0.02
57.284
Negative
Negative
1152/75Hz
1152 870
68.681
14.560
1.280
1.440
11.520
0.320
75.062
13.322
0.044
0.568
12.667
0.044
100
Negative
Negative

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2002:06:04 16:45:02
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Author                          : ¾ç
Creator                         : QuarkXPress: PSPrinter 8.3.1
Title                           : 720D¿µ¾î
Modify Date                     : 2002:06:11 14:29:05+09:00
Page Count                      : 7
EXIF Metadata provided by EXIF.tools
FCC ID Filing: MSAD17DL

Navigation menu