Hansol LCD D19BL Color Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	272154
Application ID	aENerJ427mlu9Dwb0HZnYw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	40.31kB (503892 bits)
Date Submitted	2002-09-23 00:00:00
Date Available	2002-09-23 00:00:00
Creation Date	2002-05-07 13:50:12
Producing Software	Acrobat Distiller 4.0.5 for Macintosh
Document Lastmod	2002-09-23 11:22:19
Document Title	Users Manual
Document Creator	QuarkXPress: PSPrinter 8.3.1
Document Author:	¾ç

FCC Information
This equipment has been tested and found to comply with limits for a class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful inteference to radio
Communications. However, there is no guarantee that interference will not occur in a particular
installation.
English
If this equipment does cause unacceptable interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced Radio/TV technician for help.
Introduction
Package
Features
Safety Information
Power Management System
Installation
Connection to your computer
Pin assignment table D-Sub mini 15 pin connector
Controls
Function of controls
OSD Menu
Troubleshooting
Troubleshooting Guide
13
Specifications
Electrical specifications
14
Mechanical specifications
14
Environmental specifications
14
Appendix
Preset timings
User’s Manual
15
User’s Manual
Introduction
Introduction
Caution
Features
ENGLISH
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
19-inch(18 inch visual)high performance display color monitor
Warning
If this equipment has more than one interface connector, do not leave cables connected to
unused interfaces.
Automatically scans frequencies from
- Horizontal frequency: 30 to 96KHz
- Vertical frequency: 50 to 160Hz
Canadian Notice
This Class B digital apparatus meets all requirements of the Cannadian Interference Causing
Equipment Regulations.
Avis Canadien
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le
matériel brouilleur du Canada.
Compatible with VGA, SVGA, VESA, MAC Standards and maximum resolution modes up to
1600 1200
Supports VESA flicker free modes including 85Hz refresh rate.
On Screen menu fingertip control system to visually select and adjust screen images using
control buttons on front panel and on screen menus.
Notice
The information contained in this document is subject to change without notice.
Power supply operates on AC 100-240V( 10%), 50/60Hz for use all over the world.
Package
First, we would like to thank you for your purchase of this monitor. This monitor is 19inch, high
resolution, color display monitor. This manual covers the use, and points of caution, when
operating this monitor.
Please take the time to read this manual so that you will obtain the best performance and most
use from your monitor. After reading the manual, store it in a safe place for future reference.
This items illustrated below are contained in the carton.
First, be sure that your carton includes the following items.
If any items are missing or damaged, please contact your local dealer or supplier.
Equipped with DDC 2B for Plug & Play capability.
Equipped with an energy-saving feature.
Power management circuit signaled by the computer system, will reduce power consumption
when the computer system is not in use.
Monitors with nonglare/antistatic screens are compliant with MPR
1990 Emissions standards and meets requirements for CE Marking.
TCO : (option)
D19BL
- Color Monitor
- AC Power input cable
- User’s Manual (Warranty Registration Card)
- Signal Cable (15pin 3layer D-sub)
User’s Manual
User’s Manual
Introduction / Installation
Introduction
Safety information
For 120Volt applications use only UL listed detachable power cord with NEMA configuration
5-15P type(parallel blades) plug cap.
For 240Volt applications use only UL listed detachable power cord with NEMA configuration
6-15P type(tandem blades) plug cap.
Use only a power source and connection appropriate for the monitor as indicated on the
marking label.
Slots and openings in the cabinet are provided for ventilation;
these openings must not be blocked or covered. Never push objects of any kind into cabinet
This monitor meets VESA(Video Electronics Standards Association) DPMS(Display Power
Management Signalling)standards. In order for the monitor s power saving feature to function,
the video board or computer must also meet VESA® DPMSTM standards.
Power management table
State
Sync
Horizontal
Vertical
Video
LED Color
Power
Consumption
Normal
Operation
Active
Active
Active
Green
95W
Standby
Inactive
Active
Blanked
AMBER
Less than
15W
Power saving function mode
Suspend Mode Power-Off Mode
Active
Inactive
Inactive
Inactive
Blanked
Blanked
AMBER Blinking AMBER Blinking
Less than
Less than
15W
3W
Note : The monitor automatically goes through the DPMS steps when it is idle.
To release the monitor from the DPMS condition, press any key on the keyboard.
slots or other openings.
Never insert anything metallic into the monitor openings.
Doing so may create a danger of electric shock.
To avoid electric shock, never touch the inside of the monitor.
Only a qualified technician should open the monitor s case.
Unplug the monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp, lint-free cloth for cleaning.
Connection to your computer
CAUTION
Ensure that both the PC and the display monitor are switched off.
To attach the monitor to your system, as shown in
the following illustrations.
1. Connect the signal cable
Install the monitor near an outlet that you can reach easily. Disconnect the product by
grasping the plug firmly and pulling in from the outlet.
to the 15pin
graphics connector of the system and tighten
the fastening screws.
Never disconnect it by pulling the cord.
2. Insert the AC power cord into monitor and
then into an AC power outlet.
3. To turn on the monitor, push the power switch.
Note : To attach the monitor to the Macintosh system, please contact an authorized dealer.
(Need to use a special adaptor)
User’s Manual
User’s Manual
ENGLISH
Provided with this monitor is a detachable power supply cord with IEC320 style terminations.
It may be suitable for connection to any UL listed personal computer with similar
configuration. Before making the connection ensure that the voltage rating of the computer
convenience outlet is the same as the monitor and that the ampere rating of the computer
convenience outlet is equal to or exceeds the monitor current rating.
Power management system
Installation / Controls
Controls
Additional front controls
Pin assignment table D-Sub Mini 15pin connector
Assignment
Red Video
Green Video
Blue Video
Frame Ground
Ground
Red Video Ground
Green Video Ground
Blue Video Ground
N.C
ID
Monitor Ground
SDA
H-Sync
V-Sync
SCL
Power Switch : Turn the monitor power on or off, When the power is on, the LED is lit.
The 15-Pin D-sub connector (male)
of the signal cable (IBM Systems)
ENGLISH
Pin No.
10
11
12
13
14
15
Accessing OSD
Press MENU Button.
: Direct Brightness access.
: Direct Contrast access.
EXIT from OSD
: Press this (
) button in the main menu and submenu.
10
11
15
(15 Pin D-Sub)
OSD Menus
Main Menu
OSD main menu allows you to adjust user controls.
Function of controls
OSD Controls
The OSD apears on the screen when you press MENU button.
“ON SCREEN MENU” controls include the following extended controls such as Size, Position,
Geometry Distortion, Color Temp., Degauss, Moire on & off, Language, OSD-Position, Recall,
Cont. & Brt., etc.
Use the
: Control buttons to scroll through all of the menus.
Main Menu control guide
: Exits the OSD controls.
/ : Move the function to choose.
MENU : Proceed to the selected menu.
User’s Manual
User’s Manual
Controls
Controls
Position and size Menu control guide
Contrast Menu
: Increase or decrease the Contrast.
: Exit to the main menu.
: Refer to
ENGLISH
: Proceed to the Contrast menu.
MENU : Toggle Horizontal and Vertical directly.
Geometry Menu
Brightness Menu
The Geometry controls allow you to adjust the
curvature or angle of displayed image.
: Proceed to the Brightness menu.
: Increase or decrease the Brightness .
Position Menu
Atfer choosing
, push MENU button.
Pincushion : Increase or decrease the curvature of the sides either inward or outward.
Parallelogram : Increase or decrease the tilt of the sides either to the left or right.
Trapezoid : Increase or decreases the bottom of the screen to be the same as the top.
Pin Balance : Increase or decrease the curvature of the sides.
Top Corner : Increase or decreases the curvature of the top sides.
Bottom Corner : Increase or decrease the curvature of the bottom sides.
Rotation : Rotate the entire display to clockwise or counterclockwise.
After choosing
, push MENU button.
MEUN : Push this button again & again to change the H/V-position.
: Moves the image left or down.
: Moves the image right or up.
Geometry Menu control guide
: Exit to the main menu.
: Move the function to choose.
MENU : Function to choose.
: Increase or decrease the adjustment.
Size Menu
Moire Menu
After choosing
, push MENU button.
Select ON or OFF with
key.
Select H.MOIRE or V.MOIRE with
key.
: Adjust the Moire Control.
After choosing
, push MENU button.
MENU : Push this button again & agiain to change the H/V-size.
: Decrease the Horizontal or Vertical size of the image.
: Increase the Horizontal or Vertical size of the image.
10
User’s Manual
User’s Manual
11
Controls
Troubleshooting
Language Menu
Troubleshooting guide
ENGLISH
After choosing
, push MENU button.
: Select the language.
If your monitor is not performing properly, please use the following troubleshooting chart for
quick solutions to common problems.
Problem
Possible cause
Remedy
OSD Position Menu
After choosing
, push MENU button.
MENU : Push this button again & again to
change the H/V-OSD position.
: Move the OSD position left or down.
: Move the OSD position right or up.
No Picture
Color Temp Menu
Picture is
unstable
Presetting Select the desired color setting. The bar is replaced by the color setting choice.
" USER, 6500K, 9300K "
Color adjustment is available only in USER mode.
: Move the bar with
or
key to select the user
MENU : Press MENU button to access the sub-menu.
: Increcse or decrease the selected color adjustment.
: Exit to the main menu.
Controls
ICON
Degauss
12
Connect power cord.
Is the power switch on?
Turn on power switch.
Is the signal cable properly
connected?
Connect signal cable properly
Is the monitor in the power save
mode?
Press any key on the keyboard or
move the mouse.
Is the signal cable properly
connected?
Connect signal cable properly
Are there signals, which are
outside of the required frequency
range?
Input signals which are within the
range of the monitor.
Is the signal connector pin
assigments correct?
Use correct signal connector.
Are there signals, which are
outside of the required frequency
range?
Use correct signal which within the
frequency range of the monitor(If
the signal is correct, adjust the
controls to desired image.)
Is the magnetic object nearby?
Move object far away.
Is the pin arrangement of the
signal connector correct?
Use correct signal cable.
Use degauss control.
Function
This control removes the build-up of magnetic fields that
can affect color purity and convergence.
Note : The picture shakes while degaussing is taking
place. After internal degaussing the circuitry takes about
30 minutes to regain its maximum power.
Recall
This controls recalls certain factory setting such as size,
position, geometry and color by pressing MENU button.
If the monitor is operating in a user mode, this controls has
no effect.
Zoom
-/+ : Increase or decrease the Vertical and Horizontal size
of image at the same time.
User’s Manual
The display
image is not
centered, too
small or large.
Is the power cord connected?
The color of
image on screen
is abnormal.
User’s Manual
13
Specifications
Appendix
Preset Timings
Electrical Specifications
D19BL
19 , 90 deflection, Flat
CRT Horizontal Dot pitch
0.20mm
CRT Surface
Anti-Reflection & Anti-Static
Sync
Input
Signal
This Monitor D19BL has preset modes for the 10 most popular industry standards for Plug and
Play capability.
Horizontal
H/V Separate, TTL, positive/negative
Video
Video
Sync
Sync
H/V Composite, TTL, positive/negative
Video
Scanning
frequency
Horizontal
Vertical
Maximum Resolution
RGB Analog (0.7Vp-p), positive
75
Terminated
30KHz~96KHz (Automatically)
50Hz~160Hz (Automatically)
1600Dots 1200Lines (Non-interlace)
Resolution
Pixel Clock(Max.)
210 MHz
Display Size (Standard)
Horizontal 350mm, Vertical 262mm
Power Consumption(Normal)
95 W
Power Supply
AC 100-240V( 10%), 50/60Hz
3Hz
Input Connector
D-Sub, 15Pin Connectors (3layer)
Display Colors
Unlimited
Mechanical Specifications
ITEM
D19BL
Unit
Carton
Weight
18.5 (W) 18.4 (D) 18.3 (H)
470mm(W) 466.5mm(D) 466mm(H)
Dimension
22.6 (W) 24.4 (D) 22.2 (H)
573mm(W) 620mm(D) 564mm(H)
Net
21.5Kg (47.3Ibs)
Gross
25Kg (55Ibs)
Environmental Specifications
ITEM
Temperature
Humidity
14
Vertical
User’s Manual
D19BL
Operating
Storage
32 F to 104 F (0 C to 40 C)
-4 F to 140 F (-20 C to 60 C)
10% to 85% R.H. Non-condensing
Timing
H-Freq
A sec
B sec
C sec
D sec
E sec
V-Freq
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate
H-Polarity
V-Polarity
Resolution
Timing
H-Freq
A sec
B sec
C sec
D sec
E sec
V-Freq
Omsec
Pmsec
Qmsec
Rmsec
Smsec
Pixel rate
H-Polarity
V-Polarity
IBM
VGA/70Hz VGA/60Hz
720 400
640 480
31.469
31.469
31.777
31.777
3.813
3.813
1.907
1.907
25.422
25.422
0.636
0.636
70.09
59.94
14.268
16.684
0.064
0.064
1.08
1.048
12.711
15.253
0.413
0.318
28.322
25.175
Negative
Negative
Positive
Negative
640/75Hz
640 480
37.5
26.667
2.032
3.81
20.317
0.508
75
13.333
0.08
0.427
12.8
0.027
31.500
Negative
Negative
640/85Hz
640 480
43.269
23.111
1.556
2.222
17.778
1.556
85.008
11.764
0.069
0.578
11.093
0.023
36
Negative
Negative
VESA
800/75Hz
800 600
46.875
21.333
1.616
3.232
16.162
0.323
75
13.333
0.064
0.448
12.8
0.021
49.5
Positive
Positive
800/85Hz
800 600
53.674
18.631
1.138
2.702
14.222
0.569
85.061
11.756
0.056
0.503
11.179
0.019
56.25
Positive
Positive
1024/75Hz
1024 768
60.023
16.660
1.219
2.235
13.003
0.203
75.029
13.328
0.050
0.466
12.795
0.017
78.750
Positive
Positive
VESA
1024/85Hz 1280/75Hz 1280/85Hz 1600/75Hz
1024 768 1280 1024 1280 1024 1600 1200
68.677
79.976
91.146
93.75
768 1280
1024 1280
1024
1024 1600
1200
14.561
12.504
10.971
10.667
1.016
1.067
1.016
0.948
2.201
1.837
1.422
1.501
10.836
9.481
8.127
7.901
0.508
0.119
0.406
0.316
84.997
75.025
85.024
75.000
11.765
13.329
11.761
13.333
0.044
0.038
0.033
0.032
0.524
0.475
0.579
0.491
11.183
12.804
11.235
12.800
0.015
0.013
0.011
0.011
94.5
135
157.5
202.5
Positive
Positive
Positive
Positive
Positive
Positive
Positive
Positive
User’s Manual
15
ENGLISH
ITEM
CRT Type

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2002:05:07 13:50:12Z
Modify Date                     : 2002:09:23 11:22:19+09:00
Page Count                      : 7
Creation Date                   : 2002:05:07 13:50:12Z
Producer                        : Acrobat Distiller 4.0.5  for Macintosh
Author                          : ¾ç
Mod Date                        : 2002:09:23 11:22:19+09:00
Metadata Date                   : 2002:09:23 11:22:19+09:00
Creator                         : ¾ç
Title                           : ¿µ¹®Ç¥Áö

EXIF Metadata provided by EXIF.tools