Hansong HSBT075 HSBT075 User Manual HSBT075 VM10

Hansong(Nanjing) Technology Ltd. HSBT075 HSBT075 VM10

User manual rev.2

Download: Hansong HSBT075 HSBT075 User Manual HSBT075  VM10
Mirror Download [FCC.gov]Hansong HSBT075 HSBT075 User Manual HSBT075  VM10
Document ID4000934
Application ID5fKwl0vAY9LghCbUkJEyJg==
Document DescriptionUser manual rev.2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize26.64kB (333039 bits)
Date Submitted2018-09-11 00:00:00
Date Available2018-09-12 00:00:00
Creation Date2018-09-11 13:57:05
Producing SoftwareGPL Ghostscript 9.22
Document Lastmod2018-09-11 13:57:05
Document TitleHSBT075 User manual VM10
Document CreatorPDFCreator Version 1.2.3
Document Author: Wade.Zhang

HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
BlueTooth Module
HSBT075
Datasheet
HANSONG (NANJING) TECHNOLOGY CO. , LTD.
APROVED
MANAGER
CHECKED
FILLED
Customer.
S.MANAGER MANAGER
HSBT075 module_datasheet
CHECKED
CHIEF
Version 1.0– Mar 08th
CONFIDENTIAL
1 / 12
FILLED
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
Features
Product Features:
Main Chipset : CSR8675CIBBHR
Bluetooth Spec V5.0 Compliant hardware
Class 2,Class 1
type Output Power
Support Firmware Upgrade
USB 1.1 and UART Host Interface
Multi-Configurable I2S, PCM or SPDIF Interface
Integrated Switched-Mode Regulator
Integrated Battery Charger
Integrated Microphone bias
Integrated LED Driver
Built in 16-bit Stereo Codec- 95dB SNR for DAC
Factory configurable to either 1.8V or 3.3V supply.
16Mb internal flash memory (64-bit wide, 45ns);
optional support for 64Mb of external SPI flash
Support for 802.11 Co-existence
SBC, MP3, AAC, APTX decoder support.
HSBT075-EA: Ext. antenna
HSBT075-IA: PCB antenna
HSP v1.2/ HFP v1.6/ A2DP v1.2/ AVRCP v1.4
Two antenna type(Ext. or PCB antenna)
RoHS compliant.
Size
HSBT075 Module
18.5 x38 .5x3.0mm
Ant. can be selected PCB and Ext. Antenna base on product request.
Applications
Stereo Wireless Headsets.
Wired stereo headsets and headphones.
Portable stereo speakers.
Analog and USB Mulitmedia Dongle.
Home Audio System.
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
2 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
System Architecture
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
3 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
Pin Assignment
Terminal
Pin Name
Pin Type
Description
1.
GND
GND
Common Ground
2.
CAP0
Analogue input
Capacitive touch sensor input
3.
CAP1
Analogue input
Capacitive touch sensor input
4.
CAP2
Analogue input
Capacitive touch sensor input
5.
CAP3
Analogue input
Capacitive touch sensor input
6.
CAP4
Analogue input
Capacitive touch sensor input
7.
CAP5
Analogue input
Capacitive touch sensor input
8.
GND
GND
Common Ground
9.
AIO0
Bidirectional
Analogue programmable input / output
Line
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
4 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
10.
AIO1
Bidirectional
Analogue programmable input / output
line
11.
12.
13.
14.
PCM_IN
PCM_CLK
PCM_SYNC
PCM_OUT
Bidirectional with weak
Synchronous data input.
pull-down
Alternative function PIO[17].
Bidirectional with weak
Synchronous data clock.
pull-down
Alternative function PIO[20].
Bidirectional with weak
Synchronous data sync.
pull-down
Alternative function PIO[19].
Bidirectional with weak
Synchronous data output.
pull-down
Alternative function PIO[18].
15.
GND
GND
Common Ground
16
RST#
Input with strong pull-up
Reset if low. Input debounced so must be
low for >5ms to cause a reset.
17
SPI_CS#
Input with strong pull-up
Chip select for SPI, active low
18.
SPI_MISO
Output with weak pulldown
SPI data output
19
SPI_CLK
Input with weak pulldown
SPI clock
20
SPI_MOSI
Input with weak pulldown
SPI data input
21
GND
GND
Common Ground
22
RXD
Bidirectional with strong
UART data input.
pull-up
23
TXD
Bidirectional with weak
UART data output.
pull-up
24
25
RTS
CTS
Bidirectional with weak
UART request to send, active low.
pull-up
Alternative function PIO[16].
Bidirectional with weak
UART clear to send, active low.
pull-down
26
GND
GND
Common Ground
27
LED0
Open drain
LED driver.
Alternative function PO[29].
28
LED1
Open drain
LED driver.
Alternative function PO[30].
29
LED2
Open drain
LED driver.
Alternative function PO[31].
30
PIO0
Bidirectional with weak
Programmable input / output line
pull-down
31
PIO1
Bidirectional with weak
Programmable input / output line
pull-down
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
5 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
32
PIO2
Bidirectional with weak
Programmable input / output line
pull-down
33
PIO3
Bidirectional with weak
Programmable input / output line
pull-down
34
GND
GND
Common Ground
35.
PIO4
Bidirectional with weak
Programmable input / output line
pull-down
36.
PIO5
Bidirectional with weak
Programmable input / output line
pull-down
37.
PIO6/SCL
Bidirectional with weak
Programmable input / output line
pull-down
38.
PIO7/SDA
Bidirectional with weak
Programmable input / output line
pull-down
39
PIO10
Bidirectional with weak
Programmable input / output line
pull-down
40
PIO11
Bidirectional with weak
Programmable input / output line
pull-down
41
PIO12
Bidirectional with weak
Programmable input / output line
pull-down
42
GND
GND
Common Ground
43
PIO13
Bidirectional with weak
Programmable input / output line
pull-down
44
PIO14
Bidirectional with weak
Programmable input / output line
pull-down
45
PIO15
Bidirectional with weak
Programmable input / output line
pull-down
46
47
48
49
50
51
PIO21
PIO22
PIO23
PIO24
PIO25
PIO26
Bidirectional with strong
SPI flash clock.
pull-down
Alternative function PIO[21].
Bidirectional with strong
SPI RAM clock.
pull-down
Alternative function PIO[22].
Bidirectional with strong
SPI flash chip select.
pull-up
Alternative function PIO[23]
Bidirectional with strong
SPI RAM chip select.
pull-up
Alternative function PIO[24].
Bidirectional with strong
Serial quad I/O flash data bit 0.
pull-down
Alternative function PIO[25].
Bidirectional with strong
Serial quad I/O flash data bit 1.
pull-down
Alternative function PIO[26].
52
GND
GND
Common Ground
53
PIO27
Bidirectional with strong
Serial quad I/O flash data bit 2.
pull-down
Alternative function PIO[27]
Bidirectional with strong
Serial quad I/O flash data bit 3.
54
PIO28
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
6 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
pull-down
Alternative function PIO[28].
55
GND
GND
Common Ground
56
USB_P
Bidirectional
USB Data
57
USB_N
Bidirectional
USB Data
58
GND
GND
Common Ground
59
VDDIO
Power
GPIO Level setting,VDDIO=1.8V,GPIO Level will
be1.8V. VDDIO=3.3V,GPIO Level will be 3.3V.
60
SMPS_BAT
Power
1.8V and 1.35V switch-mode power supply regulator
inputs. Must be at the same potential as VBAT.
61
USB_3V3
Power
Positive supply for USB ports
62
VBAT_SEN
Power Control
Battery charger sense input
63
CHG_EXT
Power Control
External battery charger control
64
VCHG
Power
Battery charger input
65
VBAT
Power
Battery positive terminal
66
VREG
Power Switch
Regulator enable input
67
GND
GND
Common Ground
68
MICR_N
Analogue in
Microphone input positive, Right
69
MICR_P
Analogue in
Microphone input negative, Right
70
BISB
Analogue out
Microphone bias B
71
MICL_N
Analogue in
Microphone input negative, Left
72
MICL_P
Analogue in
Microphone input positive, Left
73
BISA
Analogue out
Microphone bias A
74
SPKR_P
Analogue out
Speaker output positive, right
75
SPKR_N
Analogue out
Speaker output negative, right
76
SPKL_N
Analogue out
Speaker output negative, Left
77
SPKL_P
Analogue out
Speaker output positive, Left
78
GND
GND
Common Ground
General Specifications
Recommended Operation Codiction
Min
Max
Operating Temperature Range
-20°C
+70°C
Supply Voltage, (VBAT)
2.5V
4.2V
Supply Voltage, (VCHG)
4.5V
5.75V
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
7 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
RF Characteristics
Receiver
Units
Min
Typ
Max
Bluetooth Spec
Sensitivity at 0.1% BER
dBm
-90
-86
≤-70
Maximum Receiver Signal
dBm
-20
-10
≥ -20
C/I Co-Channel
dB
11
≤11
Adjacent Channel Selectivity C/I -1MHz
dB
-6
≤0
2nd Adjacent Channel Selectivity C/I -2MHz
dB
-38
-30
≤-30
3rd Adjacent Channel Selectivity C/I -3MHz
dB
-45
-40
≤-40
Image Rejection C/I
dB
-16
-9
≤-9
Transmitter
Units
Min
Typ
Max
Bluetooth Spec
RF Output Power
dBm
0 to +10
RF Power Control Range
dB
16
24
> 16
RF Power Range Control Resolution
dB
0.5
20dB Bandwidth for Modulated Carrier
KHz
940
1000
<1000
2nd Adjacent Channel Power (+/- 2MHz)
dBm
-36
-20
≤-20
3rd Adjacent Channel Power (+/- 3MHz)
dBm
-45
-40
≤-40
VBAT = 4.2V; f = 2.4441GHz; T=20°C
VBAT = 4.2V; f = 2.4441GHz; T=20°C All specifications including pinouts and electrical specifications may be changed
without prior notice
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
8 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
Dimension
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
9 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
This device complies with Part 15 of the FCC Rules / Industry Canada licence-exempt
RSS standard(s). Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject
to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired
operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux
CNR d’Innovation, Sciences et Développement économique Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions
suivantes :
1) L’appareil ne doit pas produire de brouillage;
2) L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d’en compromettre le fonctionnement.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
To satisfy FCC / IC RF exposure requirements, a separation distance of 20 cm or
more should be maintained between the antenna of this device and persons during
device operation.
To ensure compliance, operations at closer than this distance is not recommended.
Les antennes installées doivent être situées de facon à ce que la population ne puisse
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
10 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
y être exposée à une distance de moin de 20 cm. Installer les antennes de facon à ce
que le personnel ne puisse approcher à 20 cm ou moins de la position centrale de l’
antenne.
La FCC des éltats-unis stipule que cet appareil doit être en tout temps éloigné d’au
moins 20 cm des personnes pendant son functionnement.
This device is intended for OEM integrators only. Please see the full grant of equipment
document for restrictions.
If the FCC ID of this module is not visible when it is installed inside another device,
then the outside of the device into which the module is installed must be label with
“Contains FCC ID: XCO-HSBT075 and Contains IC: 7756A-HSBT075”.
This radio transmitter (Model: HSBT075, FCC ID: XCO-HSBT075, IC: 7756A-HSBT075) has
been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated.
Antenna types not included in this list, having a gain greater than the maximum gain indicated
for that type, are strictly prohibited for use with this device.
Gain of antenna:
4.2 dBi max.
Type of antenna: 50ohm, external Omni-directional, PIFA and internal PCB Antenna.
Le présent émetteur radio (Model: HSBT075, FCC ID: XCO-HSBT075, IC: 7756A-HSBT075) a
été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés
ci-dessous et ayant un gain admissible maximal et l'impédance requise pour chaque type
d'antenne.
Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal
indiqué, sont strictement interdits pour l'exploitation de l'émetteur.
Gain d'antenne: 4.2 dBi maximal
Type d'antenne: 50-ohm, external Omni-directional, PIFA and internal PCB Antenna.
HSBT075 module_datasheet
Version 1.0– Mar 08th
CONFIDENTIAL
11 / 12
HANSONG
HANSONG(NANJING) TECHNOLOGY LTD.
Revision control
Revision
Author/Date
V1.0
Dany/2018-03-08
HSBT075 module_datasheet
Check by
Approve by
Remarks
Version 1.0– Mar 08th
CONFIDENTIAL
12 / 12

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 12
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:04e27c36-b7e3-11e8-0000-5248cfb8202a
Producer                        : GPL Ghostscript 9.22
Keywords                        : 
Modify Date                     : 2018:09:11 13:57:05+08:00
Create Date                     : 2018:09:11 13:57:05+08:00
Creator Tool                    : PDFCreator Version 1.2.3
Document ID                     : uuid:04e27c36-b7e3-11e8-0000-5248cfb8202a
Format                          : application/pdf
Title                           : HSBT075 User manual VM10
Creator                         : Wade.Zhang
Description                     : 
Author                          : Wade.Zhang
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: XCO-HSBT075

Navigation menu