Hanwha Techwin DIGIMAX430 Digital Camera User Manual D430en 02

Samsung Techwin Co Ltd Digital Camera D430en 02

UserManual.wiki >

Hanwha Techwin >

DIGIMAX430 User Manual HTML Version

User Manual

Thank you for buying a Samsung Camera.

This manual will guide you through using the Digimax 430, including capturing images, downloading images and using

the Photo Impression software. Please read this manual carefully before using your new camera.

ENGLISH

Use this camera in the following order

Instructions

Insert the

USB cable

Set up the

camera driver

Before connecting the camera to a PC, via the

USB cable, you will need to set up the camera

driver. Install the camera driver that is contained in

the Application S/W CD-ROM.(p.76)

Take a picture (p.21)

Insert the supplied USB cable into the PC’s USB

port and the camera’s USB connection

terminal.(p.82)

Check the camera’s power

If the power is turned off, press the camera button

to power it on.(p.24)

Take a picture

Check the

camera’s power

Check

[Removable Disk]

Open Window s EXPLORER and search for

[Removable Disk].(p.83)

If you use a card reader to copy the images on the memory card to your PC, the images

could be damaged. When transferring the images taken with the camera to your PC, be sure

to use the supplied USB cable to connect the camera to your PC. Please note that the

manufacturer holds no responsibility for loss or damage of images on the memory card due

to the use of a card reader.

Getting to know your camera

Thank you for buying a Samsung Digital Camera.

Prior to using this camera, please read the user manual thoroughly.

When you require After Sales service, please bring the camera and the cause of the camera

malfunction (such as Batteries, Memory card etc.) to the A/S center.

Please check that the camera is operating properly prior to when you intend to use it (e.g. for

a trip or an important event) to avoid disappointment. Samsung camera takes no

responsibility for any loss or damages that may result from camera malfunction.

Keep the manual in a safe place.

Microsoft, Windows and Windows logo are registered trademarks of Microsoft Corporation

incorporated in the United States and/or other countries.

All brand and product names appearing in this manual are registered trademarks of their

respective companies.

This manual contains instructions on using this camera that will help you to use this camera

safely and correctly. This will help prevent danger and injury to others.

About the icons

DANGER

DANGER indicates an imminently hazardous situation which, if not avoided,

will result in death or serious injury.

WARNING

WARNING indicates a potentially hazardous situation, which, if not avoided,

could result in death or serious injury.

CAUTION

CAUTION indicates a potentially hazardous situation, which, if not avoided,

may result in a minor or moderate injury.

Danger

Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock

or severe damage to you or your camera. Internal inspection, maintenance and repairs

should be carried out by your dealer or Samsung Camera Service Center.

Please do not use this product in close proximity to flammable or explosive gases, as this

could increase the risk of explosion.

Should any form of liquid or a foreign object enter the camera, do not use it. Switch off the

camera, and then disconnect the power source (batteries or AC Power Adapter). You must

contact your dealer or Samsung Camera Service Center. Do not continue to use the camera

as this may cause a fire or electric shock.

Do not insert or drop metallic or inflammable foreign objects into the camera through access

points e.g. the memory card slot and battery chamber. This may cause a fire or electric

shock.

Do not operate this camera with wet hands. This could pose a risk of electric shock.

Do not use the flash in close proximity to people or animals. Positioning the flash too close to

your subject’s eyes, may cause eyesight damage.

When taking photographs, never point the lens of the camera directly into very strong light.

This may result in permanent damage to your eyesight.

For safety reasons keep this product and accessories out of reach of children or animals to

prevent accidents e.g.:

Swallowing batteries or small camera accessories. If an accident should occur, please

consult a doctor immediately.

There is the possibility of injury from the camera’s moving parts.

Batteries and camera may become hot during prolonged use and it may result in camera

malfunction. Should this be the case, allow the camera to sit idle for a few minutes to allow it

time to cool.

Do not recharge non rechargeable batteries. This may cause an explosion.

Do not leave this camera in places subject to extremely high temperatures, such as a sealed

vehicle, direct sunlight or other places of extreme variances in temperature.

Exposure to extreme temperatures may adversely affect the camera s internal components

and could cause a fire.

When in use, do not cover the camera or AC Power Adapter. This may cause heat to build up

and distort the camera body or cause a fire. Always use the camera and its accessories in a

well-ventilated area.

Warning

Caution

Leaking, overheating, or burst batteries could result in fire or injury.

Use batteries with the correct specification for the camera.

Do not short circuit, heat or dispose of batteries in fire.

Do not insert the batteries with the reverse polarities.

Remove the batteries when not planning to use the camera for a long period of time.

Batteries may leak corrosive electrolyte and irreparably damage the camera's components.

Do not fire the flash while it is in contact with hands or objects. Do not touch the flash after

using it continuously. It may cause burns.

Do not move the camera while it is switched on, if you are using the AC Power Adapter.

After use, always switch off the camera before unplugging the adapter from the wall socket.

Then make sure that any connector cords or cables to other devices are disconnected before

moving the camera. Failure to do so may damage the cords or cables and cause a fire or

electric shock.

An FCC warning

This device has been tested in accordance with the limits of a class B digital device

under item 15 of the FCC rules. These limits are designed to provide protection against

harmful interference in commercial installation. This equipment generates, absorbs and

can emit radio frequency energy. If it is not installed and used in accordance with the

instructions, it may cause harmful interference to radio communication. There is

however, no guarantee that interference will not occur in some situations. Should any

interference occur when this device is in operation, please try one or more of the

following measures.

Change the location and direction of any aerial.

Increase distance between the camera and the affected device.

Use a different socket away from the affected device.

Please contact a Samsung agent or a radio/TV engineer.

This device complies with part 15 of the FCC Rules.

Changes or modifications not expressly approved by the party responsible for

compliance could void user's authority to operate the equipment.

This digital camera can be used for

Printing images using a dedicated printer,

DPOF and PictBridge compatible printer or a

DPOF-equipped photo lab.

(refer to page 55~62)

Down loading image files from

camera to computer.

(refer to page 84)

Editing images on a PC.

(refer to page 115)

Viewing images on a TV.

(refer to page 70)

Taking a picture.

(refer to page 20~41)

This digital camera can be used for

Inserting images directly into any

electronic document.

Taking a self-portrait and using the image

to personalize name cards.

You can even create your own unique gift

wrap paper by using your digital images.

Creation of a digital photo album.

Recording your voice.

(refer to page 22) Recording a movie clip

(refer to page 21)

Manufacturer's contents

Please check that you have the correct contents before using this product.

marked contents are optional.

Digital Camera AV cablePouch

2 AA Alkaline

Batteries

USB cable Product warrantyUser manualCamera strap

Software CD

AC adapter (3.3V)

Battery pack (SBP-3603)

SD memory card Memory Stick Duo

Battery charger AC adapter(5V)Rechargeable battery

Digimax Battery I-Pack : SBP-1103 KIT

Identification of features

Front & Top

Back & Bottom

Shutter button

Self-timer lamp

Flash light

amount sensor

Viewfinder

DC input

connection point

USB/ AV

connection terminal

Lens

Microphone

Flash

Power button

LCD monitor

Mode dial

Viewfinder

Autofocus indicator lamp(Green)

Flash indicator lamp(Red)

Zoom W button (Thumbnail)

Zoom T button (Digital zoom)

LCD button

Tripod socket

+&-/ DELETE button Play mode button

5-function

button

* When using the digital zoom to take a picture, the composition of the picture may be different

depending on whether you are using the LCD monitor or the viewfinder.

The picture will be taken in the composition of the picture as it appears on the LCD monitor.

Strap eyelet

Speaker

Identification of features

MANUAL mode

Please select this mode for quick and easy picture taking

with minimal user interaction.

Selecting automatic mode will configure the camera with

optimal settings. You can still manually configure all

functions except the iris and shutter speed.

AUTO mode

You can select the desired working mode by using the mode dial located on the back of the

camera. This digital camera has 8 recording modes. These are listed below.

SD memory

card slot

Memory Stick

DUO slot

Battery chamber

Battery chamber cover

FLASH/

LEFT button

MENU/ OK button

Macro / DOWN

Play & Pause button

SELF-TIMER/

RIGHT button

Voice memo/ UP button

Side/ 5-function button

Mode dial

Identification of features

This mode allows users to save frequently used shooting

settings for later use.

MySET mode

A movie clip can be recorded for as long as the available

recording time of the memory capacity allows.

- Image size : 640X480, 320X240(user selectable)

- Movie clip file type : *.avi

MOVIE CLIP mode

A voice recording can be recorded for as long as the available

recording time of the memory capacity allows.(Max : 1 hour)

- Voice recording file type : *.wav

VOICE RECORDING mode

Use the menu to easily configure optimal settings for a variety

of situations including children, landscape, close-up, sunset,

dawn, backlight, fireworks, beach scenes, and snowscape.

SCENE mode

This mode is used at night or against a dark background.

NIGHT SCENE mode

This is used for just portrait or both portrait and landscape

shots.

PORTRAIT mode

Identification of features

Self-timer lamp(Based on 10-second Self-timer; see p. 26)

Color Status Camera Status

Blinking

For the first 7 seconds, the LED blinks at 1 second intervals.

For the final 3 seconds, the LED blinks quickly at 0.5-second

intervals.

When the camera power is on / when the shutter button is released from pressing.

Blinking 1 time

Red

Color Status Camera Status

Blinking

Recording Mode (lightly press the shutter button): Not focused

PC Mode: Transmitting Data

Recording Mode (lightly press the shutter button): Focused

PC Mode: Turned off the LCD with the LCD button.

Green

Color Status Camera Status

Blinking Flash in the process of charging

Flash ready

Red

MODE

Icon

MODE SCENE

AUTO MANUAL MySET

MOVIE CLIP

VOICE RECORDING

NIGHT SCENE

PORTRAIT

PLAY

CHILDREN

LANDSCAPE

CLOSE-UP

SUNSET DAWN

BACKLIGHT

FIREWORKS

BEACH&SNOW

Auto focus indicator lamp(Green)

Flash indicator lamp(Red)

Mode icons

Connecting to a Power Source

There are two ways in which to provide the camera with power. You can use batteries or

alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).

We recommend using batteries for a digital camera. (Within a year from the date of

manufacture) The batteries are listed below.

Non rechargeable batteries : AA type – Alkaline, Ni-Mn, Ni-Zn, Lithium

CR-V3 type – Lithium

Rechargeable batteries : AA type – Ni-MH, Ni-Cd (over 1000mA)

CR-V3 type – Digimax Battery I-Pack(SBP-1103)

Battery pack – Digimax Battery Pack(SBP-3603)

Connecting to a Power Source

Important information about battery usage

It is easy to buy alkaline batteries. However, the duration for using batteries varies in

accordance with the battery manufacturer or the photographic conditions.

When the camera is not used, turn off the camera power.

Do not recharge the non rechargeable batteries. It may cause an explosion.

Please remove the batteries if the camera will not be used for long periods.

Batteries can lose power over time and are prone to leaking if kept inside the camera.

We recommend high capacity ALKALINE batteries as manganese batteries cannot

deliver sufficient power.

Low temperatures (below 0 ) can affect the performance of the batteries and you

may experience reduced battery life.

Batteries will usually recover at normal temperatures.

Do not use old and new batteries at the same time.

During extended use of the camera, the camera body may become warm.

This is perfectly normal.

Always turn off the power before taking the AC adapter out of the mains supply.

As with all mains powered devices, safety is important. Ensure that neither the camera

nor adapter comes into contact with water or metallic materials.

Please ensure that you use an AC adapter (3.3V 2.0A) with the correct specification

for the camera. Failure to do so may affect your warranty.

INFORMATION

DANGER

If you have access to a mains supply, using an AC

Adapter (3.3V 2.0A) allows the camera to be used for

long periods of time.

Plug the adapter into the connection point

(DC IN 3.3V) on the camera.

Remove the batteries from the camera when using an

AC adapter.

Using the AC power adapter (3.3V 2.0A)

Connecting to a Power Source

Battery status

Battery indicator

The batteries are fully

charged. Prepare new batteries.

There is no battery capacity.

Replace with new batteries.

There are 3 indicators for battery condition that are displayed on the LCD monitor.

3. To close the battery chamber cover, push it until it clicks.

2. Insert the batteries taking note of the polarity

(+ / -).

1. Open the battery chamber cover by pushing in the direction of the

arrow.

: If the camera does not turn on after you have inserted batteries,

please check whether the batteries are inserted with the correct

polarity(+ and-).

Using the batteries

Inserting the AA type battery Inserting the CR-V3 type battery

The Digimax Battery Pack is a rechargeable external

Li-ion battery for use with most digital cameras.

These optional battery packs provide long lasting

power and their operating performances are much

improved over Ni-MH and Alkaline batteries.

This is due to the mass storage lithium ion cell.

Refer to the illustrations.

Using the Digimax battery pack ( Optional : SBP-3603, 3.3V)

Instructions on how to use the memory card

Be sure to format the memory card (see p. 59) if you are using a newly purchased memory

for the first time, if it contains data that the camera cannot recognize, or if it contains images

captured with a different camera.

Turn off the camera power whenever the memory card is being inserted or removed.

Repeated use of the memory card will eventually reduce the memory card’s performance.

Should this be the case, you will need to purchase a new memory card.

Wear and tear on the memory card is not covered by the Samsung warranty.

The memory card is an electronic precision device.

Do not bend, drop or subject the memory card to any heavy impact.

Do not store the memory card in an environment with strong electronic or magnetic fields,

e.g. near loud speakers or TV receivers.

Please do not use or store in an environment where there are extremes in temperature.

Do not allow the memory card to become dirty or to come into contact with any liquid.

Should this happen, clean the memory card with a soft cloth.

Please keep the memory card in its case when not in use.

During and after periods of extended use, you may notice that the memory card is warm.

This is perfectly normal.

Do not use a memory card that is used in another digital camera or memory card reader.

Do not use a memory card formatted by another digital camera or memory card reader.

Maintenance of the memory card

If the memory card is subjected to any of the following, the recorded data may become

corrupted :

- When the memory card is used incorrectly.

- If the power is switched off or the memory card is removed while recording, deleting

(formatting) or reading.

Samsung cannot be held responsible for lost data.

It is advisable to copy important data onto other media as back-up e.g. floppy disks, hard

disks, CD etc.

If there is insufficient memory available :If you press the shutter button for the shot, a [CARD

FULL !] message will appear and the camera will not operate. To optimize the amount of

memory in the camera, replace the memory card or delete unnecessary images stored on

the memory.

Preserving the memory card data

Precautions on Using the Memory Stick Duo

If you open the battery chamber cover when the camera power is turned on, the

power will turn off automatically.

Don t remove the memory card when the Auto focus lamp(Green) is blinking as this

may cause damage to data in the memory card.

INFORMATION

[ SD(Secure Digital) memory card ]

Write protect

switch

Label

Card pins

Recorded image size Super fine Fine Normal

2272x1704

2048x1536

1600x1200

1024x768

640x480

The camera can use SD Memory Cards, MMC (Multi Media Card), and Memory Stick Duo.

Please consult the enclosed manual for using the MMC and Memory Stick Duo.

The SD memory card has a write protect

switch that prevents image files from being

deleted or formatted.

By sliding the switch to the bottom of the SD

memory card, the data will be protected. By

sliding the switch to the top of the SD memory

card, the data protection will be canceled.

Slide the switch to the top of the SD memory

card before taking a picture.

When using a 32MB SD memory card, the specified shooting capacity will be as follows.

(These figures are intended as an indication of expected performance). These figures are

approximate as image capacities can be affected by variables such as subject matter.

Inserting the memory card

1. Turn the power off using the power button.

Open the battery chamber cover and press the memory

card as shown in the image and release.

2. Remove the memory card and close the battery chamber

cover.

3. To close, push the battery chamber cover until you hear a

click. If the memory card does not slide in smoothly, do not

attempt to insert it by force. Check the direction of insertion,

and then insert it correctly. Do not insert the memory card

the wrong way round. Doing so may damage the memory

card slot.

2. Have the front of the memory card facing toward the front of

the camera (lens) and the card pins toward the back of the

camera (LCD monitor), and then push the memory card into

the card slot until you hear a click.

* When inserting the Memory Stick Duo, please have the label

side facing down (toward the LCD) and the other side up

(toward the lens).

1. Turn off the camera’s power and pull the battery chamber

cover in the direction of the arrow to open.

Removing the memory card

LCD monitor indicator

[ Image & Full Status ]

No. Description Icons Page

1Battery p.16

3Camera shake warning p.23

4Flash p.28

5Self-timer p.29

6 Voice memo p.26

7 Macro p.31

8 Metering p.36~37

9 SD card/ MS DUO indicator p.61

10 Sharpness p.61

11 Auto focus frame p.30

12 Time/ Date 01:00 PM 2004/01/01 p.38

13 Exposure compensation p.19

The LCD monitor displays information about the shooting functions and selections.

Recording mode2p.12~13

LCD monitor indicator

14 White Balance p.56

15 ISO p.56

16 RGB p.56

17 Image quality p.56

18 Image size/ Continuous shot 2272, 2048, 1600, 1024, 640 p.56

Number of available shots remaining

54 p.56

20 Optical/ Digital Zoom rate

Starting the recording mode

1. Insert the batteries. (p.18)

Insert the batteries taking note of the polarity (+ / -).

2. Insert the memory card. (p.22)

3. Close the battery chamber cover.

4. Press the power button to turn on the camera.

(If the date/time that is displayed on the LCD monitor is

incorrect, reset the date/time before taking a picture.)

5. Select the AUTO mode by rotating the mode dial.

6. Point the camera towards the subject and compose the

image by using either the viewfinder or LCD monitor.

7. Press the shutter button to capture an image.

How to use the AUTO mode ( )

[ AUTO mode ]

If the auto focus frame turns to red when you press the shutter button down half way, it

means that the camera cannot focus on the subject. Should this be the case, the camera

is unable to capture an image clearly.

INFORMATION

Remaining time

(Movie clip/ Voice recording) 02:00/00:05:00 p.56

p.56

How to use the MANUAL mode ( )

Selecting automatic mode will configure the camera with

optimal settings. You can still manually configure all functions

except the iris and shutter speed.

Steps from 1-4 are the same as those for AUTO mode.

5. Select the MANUAL mode by rotating the mode dial.

6. Press the menu button to configure advanced functions

such as image size (p.34), number of pictures in

sequential shooting (p.34), picture effects (p.34),

sharpness (p.34).

7. Point the camera towards the subject and compose the

image by using either the viewfinder or LCD monitor.

8. Press the shutter button to capture an image.

Starting the recording mode

[ MANUAL mode ]

How to use the MySET mode ( )

This mode allows users to save frequently used shooting

settings for later use.

Steps from 1-4 are the same as those for AUTO mode.

5. Select the MySET mode by rotating the mode dial.

6. You can use the menus that appear when you press

camera and menu buttons to change the desired

camera functions.

The last changed function(s) will automatically be saved

as MySET mode.

7. If you rotate the Mode Dial to MySET mode while in

another camera operation mode, the camera settings

will switch to the settings you changed in Step 6.

8. Point the camera towards the subject and compose the

image by using either the viewfinder or LCD monitor.

9. Press the shutter button to capture an image. [ MySET mode ]

Starting the recording mode

How to use the MOVIE CLIP mode ( )

Steps from 1-4 are the same as those for AUTO mode.

5. Select the MOVIE CLIP mode by rotating the mode dial.

6. The MOVIE CLIP mode icon and available recording time

will display on the LCD monitor.

7. Point the camera towards the subject and compose the

image by using either the viewfinder or LCD monitor.

Press the shutter button and movie clips are recorded

for as long as the available recording time.

Movie clips will still be recorded if the shutter button is

released.

The auto focus lamp(green) will blink during the movie

clip recording.

* If you wish to stop recording, press the shutter button

again.

* Image size and type are listed below.

- Image size : 640x480, 320 x 240(Selectable)

- File type : *.avi

[ MOVIE CLIP mode ]

How to use the VOICE RECORDING mode ( )

Steps from 1-4 are the same as those for AUTO mode.

5. Select the VOICE RECORDING mode by rotating the

mode dial.

6. Press the shutter button to record a voice.

- Press the shutter button once and voice is recorded for

as long as the available recording time(Max : 1 hour)

allows. The recording time will be displayed on the

LCD monitor.

Voice will still be recorded if the shutter button is

released.

- If you wish to stop recording, press the shutter

button again.

- File type : *.wav

[ VOICE RECORDING mode ]

A distance of 40cm between you and the camera (microphone) is the best distance to

record sound.

INFORMATION

How to use the SCENE mode ( )

Use the menu to easily configure optimal settings for a variety of situations including children,

landscape, close-up, sunset, dawn, backlight, fireworks, beach scenes, and snowscape.

Steps from 1-4 are the same as those for AUTO mode.

5. Select the SCENE mode by rotating the mode dial.

6. Press the MENU button and the SCENE mode menu will

be displayed.

7. Use the LEFT and RIGHT buttons to select the [SCENE]

menu tab.

8. Use the UP and DOWN buttons to select the desired

[SCENE] sub menu. Please see page 34 for detailed

descriptions for each screen.

9. Current scene icon is displayed at the top left of the

LCD.

10. Point the camera towards the subject and compose

the image by using either the viewfinder or LCD

monitor.

11. Press the shutter button to capture an image.

Starting the recording mode

[SCENE mode]

PORTRAIT mode ( )

This is used for just portrait or both portrait and landscape

shots.

NIGHT SCENE mode ( )

This mode is used at night or against a dark background.

Configure shutter speed by zoom scale (Long Time

shutter) with the +/- button. Please see page 45 for a

detailed description for Long Time shutter.

Things to Watch Out for When Taking Pictures

Pressing the shutter button down half way

Lightly press the shutter button to confirm focus and flash battery charge. (See page 20)

Press the shutter button all way down to take the picture.

The available recording time may vary depending on shooting conditions and camera

settings.

When the Flash Off or Slow synchro mode is selected in a low lighting condition, the camera

shake warning indicator ( ) may appear on the LCD monitor. In this case, use a tripod,

support the camera on a solid surface or change the flash mode to flash shot mode.

Backlight compensated shots : When taking an outdoor shot, avoid facing the sun, as the

image may be dark because of the strong backlight.

In backlight conditions, please use Fill-in flash(p.28), Spot

metering(p.37) or Exposure compensation(p.30).

Avoid obstructing the lens or the flash when you capture an image.

As there can be some differences between what is seen through the Viewfinder and the

resulting image when taken at a range closer than 1.5m, it is recommended that you use the

LCD monitor to compose these shots.

Using the LCD monitor extensively will drain the batteries.

We recommend turning off the LCD monitor and using the optical viewfinder as often as

possible in order to extend battery life.

Under certain conditions the auto focus system may not perform as expected.

When photographing a subject that has little contrast.

- If the subject is highly reflective or shiny.

- If the subject is moving at high speed.

- When there is strong reflected light, or when the background is very bright.

- When the subject matter has only horizontal lines or the subject is very narrow

(such as a stick or flagpole).

- When the surroundings are dark.

Using the camera buttons to adjust the camera

The RECORDING(AUTO, MANUAL, MySET, MOVIE CLIP, VOICE RECORDING, SCENE,

NIGHT SCENE, PORTRAIT) mode function can be set up by using the camera buttons.

Used for turning the camera s power on / off.

If there is no operation during the specified time, the

camera s power will be turned off automatically to save

battery life. Pressing the power button for over 3 seconds

will deactivate the start-up sound function.

POWER button

Used for taking an image or recording voice in the

RECORDING mode.

In MOVIE CLIP mode : Pressing the shutter button down

fully starts the process for recording

a movie clip.

Press the shutter button once and

the movie clip is recorded for as long

as the available recording time in the memory allows.

If you wish to stop recording, press the shutter button again.

In STILL IMAGE mode

Pressing the shutter button down halfway activates the auto focus and checks the condition

of the flash.

Pressing the shutter down fully takes the image and stores the relevant data regarding the

shot. If you select voice memo recording, the recording will start after the camera has finished

storing the image data.

SHUTTER button

If the menu is displayed in RECORDING mode, pressing the

ZOOM W/T button will skip 5 menu tabs at a time.

If the menu is not displayed, this button works as the

OPTICAL ZOOM or DIGITAL ZOOM button.

ZOOM W/ T button

This camera has a 3X optical zoom and a 4X digital zoom function.

Using both will offer a total zoom ratio of 12X. When you press the ZOOM W/T button, the

zoom bar will display in the upper center part of the LCD monitor.

TELE Zoom

Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the subject i.e. the

subject will appear nearer.

Digital zoom TELE : When the maximum (3X) optical zoom is selected, pressing the

ZOOM T button activates the digital zoom software.

Releasing ZOOM T button stops the digital zooming at the required

setting. Once the maximum digital zoom (4X) is achieved, pressing

the ZOOM T button will have no effect.

[ WIDE zoom ] [ TELE zoom ] [ Digital zoom 2.0X ]

Pressing the

ZOOM T button

Pressing the

ZOOM T button

WIDE Zoom

Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject

i.e. the subject will appear further away. Pressing the ZOOM W

button continuously will set the camera to its minimum zoom setting

i.e. the subject appears at its furthest from the camera.

Digital zoom WIDE : When the digital zoom is in operation, pressing the ZOOM W button

will reduce the digital zooming in steps. Releasing ZOOM W button

stops digital zooming. Pressing the ZOOM W button will reduce the

digital zoom and then it will continue to reduce the optical zoom until

the minimum setting is reached.

[ TELE zoom ] [ Optical zoom 2X ] [ WIDE zoom ]

Pressing the

ZOOM W button Pressing the

ZOOM W button

[ Digital zoom 4.0X ] [ Digital zoom 2.0X ] [ Optical zoom 3X ]

Pressing the

ZOOM W button

Pressing the

ZOOM W button

Optical zoom

Digital zoom

ZOOM W/ T button

To use the digital zoom the LCD monitor has to be turned on.

Images taken using the digital zoom may take a little longer for the camera to process.

Allow time for this to take place.

Digital Zoom will not work in Night Scene mode.

You may notice a decrease in image quality when using the digital zoom.

When the maximum(3X) optical zoom is selected, pressing the ZOOM T button

increases the digital zoom ratio by 0.1 steps.

Do not use the zoom button while recording video, to avoid accidentally recording the

clicking sound. Please adjust the zoom before starting to record.

Take care not to touch the lens to avoid taking an unclear image and possibly causing

camera malfunction.

If the image is dim, turn the camera power off and on again to modify the lens position.

Take care not to press the lens as this may cause a camera malfunction.

When the camera is turned on, take care not to touch the camera s moving lens parts as

this may cause the resulting image to be dim and unclear.

Take care not to touch the lens during zoom operation as this may cause damage.

INFORMATION

Voice memo( ) / UP button

While the menu is showing, press the UP button to move up the submenu cursor.

When the menu is not displayed on the LCD monitor, the UP button operates as the voice

memo ( ). You can add your voice-over to a stored still image.

Recording a voice memo

1. Rotate the MODE DIAL to select a RECORDING mode with the exception of MOVIE

CLIP and VOICE RECORDING modes.

2. Press the VOICE MEMO ( ) button.

If the voice memo indicator is displayed on the LCD monitor, the setting is completed.

[ Recording Voice Memo ][ Preparing for Voice Memo ]

Voice memo ( ) / UP button

3. Press the shutter button and take a picture. The picture is stored on the memory card.

4. Voice memo will be recorded for ten seconds from the moment the picture is stored.

In the middle of the sound recording, pressing the shutter button will stop the voice memo.

A distance of 40cm between you and the camera (microphone) is the best distance to

record sound.

INFORMATION

When the macro mode is selected, it is possible that camera shake will occur.

If this is the case, use a tripod to eliminate this.

INFORMATION

While the menu is showing, press the DOWN button to move from the main menu to a

submenu, or to move down the submenu cursor.

When the menu is not showing, you can use the MACRO/ DOWN button to take macro

pictures (within the distance range of 5cm - 80 cm).

Types of focus mode and focus range(W: Wide, T: Tele)

Macro ( ) / Down button (Focusing)

Focus type Auto

Focus range 80cm ~ Infinity W : 5 ~ 80cm T : 50 ~ 80cm

[ Auto focus ] [ Macro ]

Macro ( )

Macro ( ) / Down button (Focusing)

Available focusing method, by recording mode

Focus lock

To focus on the subject positioned outside of the center, use the focus lock function.

Using the Focus Lock

1. Ensure the subject in the center of the autofocus frame.

2. Press the SHUTTER button halfway. When the green auto lights up, it means the camera

is focused on the subject. Be careful not to press the SHUTTER button all the way down to

avoid taking an unwanted pictured.

3. With the SHUTTER button still pressed down only halfway, move the camera to

recompose your picture as desired, and then press the SHUTTER button completely to

take the picture. If you release your finger from the SHUTTER button, the focus lock

function will be canceled.

[ The image to be captured ] [ Press the SHUTTER button ]

halfway and focus on the subject

[Recompose the picture and fully ]

depress the SHUTTER button

OOOOXOOOOXOOOOO

OOOOX XX XXOXXXXX

Auto

FLASH ( ) / LEFT button

WIDE TELE WIDE TELE

0.8~3.0 0.8~2.0 0.3~0.8 0.5~0.8

Unit : m

[Selecting the Auto flash]

Flash range

When the menu is displayed on the LCD monitor,

pressing the LEFT button makes the cursor shift to the

left tab.

When the menu is not displayed on the LCD monitor,

the LEFT button operates as the FLASH ( ) button.

Selecting the flash mode

1. Rotate the MODE DIAL to select a RECORDING

mode with the exception of MOVIE CLIP and VOICE

RECORDING modes.

2. Press the Flash button until the desired flash mode indicator displays on the LCD monitor.

3. A flash mode indicator will be displayed on the LCD monitor.

Use the correct flash to suit the environment.

ISO

AUTO

MACROAUTOFOCUS

Using the flash frequently will reduce the life of the batteries.

Under normal operating conditions the charging time for the flash is normally within 7

seconds. If the batteries are weak, the charging time will be longer.

During the continuous shot, movie clip mode, the flash function will not operate.

Take photographs within the flash range.

The image quality is not guaranteed if the subject is too close or highly reflective.

The LCD monitor is turned off for a while after using the flash to recharge it.

INFORMATION

FLASH ( ) / LEFT button

ICON Flash mode Description

Flash mode indicator

Available flash mode, by recording mode

If the subject or background is dark, the camera flash will

operate automatically.

Auto flash

Red eye

reduction

Fill in flash

Slow synchro

Flash off

If a subject or background is dark, the camera flash will work

automatically and will reduce the red-eye effect by using the red-

eye reduction function.

The flash will operate in conjunction with a slow shutter speed in

order to obtain the correct exposure. We recommend using a

tripod for this function. When you take an image in a condition

with poor light, the camera shake warning indicator ( ) will

display on the LCD monitor.

The flash fires regardless of available light.

The intensity of the flash will be controlled, according to the

prevailing conditions. The brighter the background or subject is,

the less intense the flash will be.

The flash does not fire. Select this mode when capturing images in

a place or situation where flash photography is prohibited.

When you capture an image in a poorly lit condition, the camera

shake warning indicator ( ) will display on the LCD monitor.

XOOXXXOXXXXXXXO

OOOXX XOOXXXXXXX

XOOXXXOXXXXXOXX

XOOXXOOXXXXXXXX

XOOOXOOXOOOOXOX

Self-timer ( ) / Right button

Selecting the self-timer

1. Rotate the MODE DIAL to select a RECORDING mode

with the exception of VOICE RECORDING mode.

2. Press the SELF-TIMER button until the desired mode

indicator displays on the LCD monitor.

A 2 second self-timer or 10 second self-timer icon ( )

appears on the LCD monitor.

2SEC self-timer ( ) :

Pressing the shutter button will allow an interval of 2

seconds before the image is taken.

10SEC self-timer ( ) :

Pressing the shutter button will allow an interval of 10

seconds before the image is taken.

3. When you press the SHUTTER button, the picture will

be taken after the specified time has elapsed.

When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor

shift to the sub tab.

When the menu is not displayed on the LCD monitor, the RIGHT button operates as the Self-

timer ( ) button. This function is used when the photographer would also like to be in the

image.

[Selecting the 10 SEC self-timer]

When taking a picture using the self-timer, the self-timer lamp works as follows:

2 second self-timer setting : The function lamp blinks at 0.25 second interval for 2

seconds.

10 second self-timer setting : The function lamp blinks at 1 second interval for the first

7 seconds. It blinks at 0.5 second interval for the

remaining 3 seconds.

If you operate the Mode dial and Self-timer button during the self-timer operation, the

self-timer function is cancelled.

Use a tripod to prevent the camera from shaking.

INFORMATION

MENU/ OK button

If the menu is displayed, use the 5-Function buttons to change the data values and for your

changes to be accepted

If the menu is not displayed, press the MENU/OK button to display a menu for the current

camera mode on the LCD monitor. Press the button again to return to the previous state.

You can use the +/- button to adjust the values for the RGB, ISO, white balance, exposure

compensation and Long Time shutter speed.

- There is no menu for VOICE RECORDING mode.

- Menu screen may not show on the LCD when another button is pressed or image data is

being processed. (Green LED next to the view finder blinks)

- When the menu is showing on the LCD monitor, it is not possible to operate the shutter

button i.e. capture an image. To capture an image, simply cancel the menu display by

pressing the MENU button.

[ Menu on ]

[ Menu off ]

Pressing

the MENU

button

+/- button

Main menu Sub menu Available camera mode

RGB

ISO

Shutter speed/ Aperture value

Changed by zoom scale

-2.0~0.0~+2.0(0.5EV steps)

Exposure compensation

WHITE BALANCE

R (Red), G (Green), B (Blue)

AUTO, 50, 100, 200, 400

AUTO, DAYLIGHT, CLOUDY,

FLUORESCENT H, FLUORESCENT L,

TUNGSTEN, CUSTOM.

SIZE

2272X1704 2272

2048X1536

1600X1200

1024X768

+/- button

RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to

be captured.

Setting RGB Values

1. Press the +/- button, and then use the UP and DOWN

buttons to select the RGB icon ( ).

The RGB menu bar will appear as shown.

2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select

the desired RGB value.

- Up/Down Button: Navigates between R, G,

and B icons.

- Left/Right Button: Changes value of each icon

3. When you press the +/- button again, the value you set will be saved and RGB setup

mode will end.

ISO : You can select the ISO sensitivity when taking pictures.

The speed or specific light-sensitivity of a camera is rated by ISO numbers.

Selecting an ISO Sensitivity

1. Press the +/- button, and then use the UP and DOWN

buttons to select the ISO icon ( ).

The ISO menu bar will appear as shown.

2. Use the LEFT and RIGHT buttons to select the desired

ISO sensitivity value.

- AUTO : The camera's sensitivity is

automatically changed by

variables such as lighting value or subject brightness.

- 50, 100, 200, 400 : You can increase the shutter speed while the same amount of light

is present, by increasing the ISO sensitivity.

However, the image may be saturated in high luminance.

The higher the ISO value, the higher the camera sensitivity to light is and therefore the

greater its capacity to take pictures in dark conditions. However, the noise level in the image

will increase as the ISO value increases, making the image appear coarse.

3. When you press the +/- button again, the value you set will be saved and ISO setup mode

will end.

+/- button

White balance : The white balance control allows you to

adjust the colours to appear more natural

looking.

Selecting a White Balance

1. Press the +/- button, and then use the UP and DOWN

buttons to select the white balance icon ( ).

The white balance menu bar will appear as shown.

2. Use the LEFT and RIGHT buttons to set the white balance to the desired value.

The value you set will be displayed on the LCD monitor.

AUTO : The camera automatically selects the appropriate white balance

settings, depending on the prevailing lighting conditions.

DAYLIGHT : For taking images outside.

CLOUDY : For taking images under a cloudy and overcast sky.

Fluorescent H : Shooting under daylight fluorescent or daylight fluorescent type

three-way fluorescent lighting

Fluorescent L : Shooting under white fluorescent lighting

TUNGSTEN : For shooting under tungsten (standard light bulb) lighting.

CUSTOM : Allows the user to set the white balance according to the shooting

condition.

Different lighting conditions may cause a colour cast on your images.

3. Press the +/- button again. The value you set will be saved and White Balance setup mode

will end.

Using the Custom White Balance

White balance settings may vary slightly depending on the shooting environment.

You can select the most appropriate white balance setting for a given shooting environment by

setting up the custom white balance.

1. Select the CUSTOM ( ) menu of the White Balance.

2. Place a sheet of white paper in front of the camera so that

the LCD monitor shows only white, and then press the

SHUTTER button ( ).

3. Your custom white balance value is stored.

- The custom white balance value will be applied, starting

with the next picture you take.

- User configured white balance will be remain effective until

it is overwritten.

[ White paper ]

MEASURE:SHUTTER

+/- button

Exposure compensation : This camera automatically adjusts the exposure according to the

ambient lighting conditions.

You can also select the exposure value by using the +/- button.

Compensating Exposure

1. Press the +/- button, and then use the UP and DOWN

buttons to select the exposure compensation icon ( ).

The exposure compensation menu bar will appear as

shown.

2. Use the LEFT and RIGHT buttons to set the desired

exposure compensation factor.

3. Press the +/- button again. The value you set will be

saved and the Exposure Compensation setup mode will close. If you change the exposure

value, the exposure indicator ( ) will be displayed on the bottom of the LCD monitor.

* A negative exposure compensation value reduces the exposure.

Note that a positive exposure compensation value increases the exposure and the LCD

monitor will appear white or you may not get good pictures.

Long Time shutter : This camera automatically adjusts the shutter speed and aperture values

to the shooting environment. However, in NIGHT SCENE mode, you can

set the shutter speed and aperture values to your preference.

Adjusting the shutter speed and aperture values

1. Select the NIGHT SCENE mode by rotating the mode dial.

2. Press +/- button and select Long Time shutter menu

with the up/down button to open the shutter speed / iris

configuration window.

3. Configure the Long Time shutter value with the

up/down/left/right button.

Up/Down Button: Select the iris / shutter speed

Left/Right Button: Change the value. Available iris value

options, depending on zoom step will

be displayed on the menu.

4. Press the +/- button again. The value you set will be saved and the mode will switch to

NIGHT SCENE mode. Press the SHUTTER button to take the picture.

+/- button

zoom0 zoom1 zoom2 zoom3 zoom4 zoom5 zoom6 zoom7

5.8 7.4 9.1 10.7 12.4 14.0 15.7 17.4

2.8 3.1 3.4 3.7 4.0 4.3 4.6 4.8

5.8 6.4 7.1 7.8 8.3 8.9 9.5 10.1

Optical Zoom

Small

Aperture

Value

Zoom Position

Focusing range(mm)

(Press left button)

Aperture Value SmallLarge

(Press right button)

Shutter Speed

Fast

(Press left button)

Slow

(Press right button)

[ Image & full information ] [ Image & basic information ] [ LCD off ]

You can check the recording status in the LCD monitor.

Pressing the LCD button in the RECORDING mode will

change the display as shown below.

If the LCD monitor is turned off, the auto focus lamp will light up.

Aperture values that can be selected for each zoom position are as follows :

Pressing the

LCD button

Pressing the

LCD button

Pressing the LCD button

LCD button

Using the LCD monitor to adjust the camera settings

You can use the menu on the LCD monitor to set up recording functions.

In any mode with the exception of VOICE RECORDING mode, pressing the MENU button

displays the menu on the LCD monitor.

The following functions are available, depending on the mode you have selected.

Menu tab Main menu Sub menu

Camera working mode

Page

2272X1704

2048X1536

1600X1200

1024X768

640X480

320X240

S.FINE

FINE

NORMAL

30FPS

15FPS

MULTI

SPOT

SINGLE

2 SHOTS

4 SHOTS

8 SHOTS

The menu will not be displayed on the LCD monitor in the following circumstances:

- When another button is being operated.

- While image data is being processed. ( when the green LED next to the viewfinder blinks)

- When there is no battery capacity.

When the menu is showing on the LCD monitor, it is not possible to operate the shutter

button i.e. capture an image.

To capture an image, simply cancel the menu display by pressing the MENU button.

INFORMATION

The items indicated by are default settings.

Metering

Continuous shot

Size

Quality

p.58

Using the LCD monitor to adjust the camera settings

How to use the menu

3. Use the UP and DOWN buttons to select a sub menu.

4. Select a sub menu, and then press the OK button.

The value you set will be saved and the menu will disappear.

1. Turn on the camera and press the MENU button. A menu for each camera mode appears.

However, there is no menu for Voice Recording mode ( ).

2. Use the LEFT and RIGHT buttons to navigate through the menus.

Press the

LEFT or

RIGHT button.

Menu tab Main menu Sub menu

Camera working mode

Page

NORMAL

B&W

SEPIA

SOFT

NORMAL

VIVID

Effect

Sharpness

Scene

p.58

QUALITY

S.FINE

FINE

NORMAL

SIZE

2272X1704 2272

2048X1536

1600X1200

1024X768

SHOTTING

SINGLE

2 SHOTS

4 SHOTS

8 SHOTS

Press the

LEFT or

RIGHT button.

Press the UP

or DOWN

button.

SIZE

2272X1704 2272

2048X1536

1600X1200

1024X768

SIZE

2272X1704

2048X1536 2048

1600X1200

1024X768

Press the UP

or DOWN

button.

SIZE

2272X1704

2048X1536

1600X1200 1600

1024X768

CHILDREN LANDSCAP CLOSE-UP

SUNSET DAWN BACKLIGHT

FIREWORKS BEACH&SNOW

Size

You can select the image size appropriate for your application. You can select from AUTO,

MANUAL, MySET, MOVIE CLIP, NIGHT SCENE, PORTRAIT and SCENE modes.

Mode

Icon 2272 2048 1600 1024 640

Size 2272X1704 2048X1536 1600X1200 1024 768 640 480 640X480 320X240

STILL IMAGE mode MOVIE CLIP mode

640 320

[ AUTO mode ] [ MOVIE CLIP mode ]

The higher the resolution, the lower the number of available shots will be because high

resolution images require more memory than lower resolution images.

INFORMATION

Quality

You can select the compression ratio appropriate for your application of the captured images.

The higher the compression ratio, the lower the picture quality. You can select from AUTO,

MANUAL, MySET, MOVIE CLIP, NIGHT SCENE, PORTRAIT and SCENE modes.

Mode

Icon

Sub menu S.FINE FINE NORMAL 30FPS 15FPS

File Format jpeg jpeg jpeg avi avi

STILL IMAGE mode MOVIE CLIP mode

[ AUTO mode ] [ MOVIE CLIP mode ]

SIZE

2272X1704 2272

2048X1536

1600X1200

1024X768

SIZE

640X480

320X240 320

FRAME RATE

640X480

320X240 320

320

NOR

QUALITY

S.FINE

FINE

NORMAL

2272

Quality

STILL IMAGE mode MOVIE CLIP mode

Number of available shots(Still image) & Available recording time(Movie clip)

(When using a 32MB SD memory card; based on Samsung's own testing)

Mode

Quality/Size 2272 2048 1600 1024 640 640 320

S.FINE 17 19 27 66 169 - -

FINE 33 38 54 132 336 - -

NORMAL 50 56 82 198 501 - -

30FPS - - - - 4 MIN 8 MIN

15FPS - - - - 7 MIN 12 MIN

S.FINE is the highest quality and NORMAL is the lowest setting. Choose the setting

appropriate for your needs.

This file format complies with the DCF(Design rule for Camera File system).

JPEG (Joint Photographic Experts Group): JPEG is the image compression standard

developed by the Joint Photographic Experts Group. This type of compression is most

commonly used for compressing photos and graphics because it can compress the files

efficiently without damaging the data.

INFORMATION

If you cannot obtain suitable exposure conditions, you can change the metering method to

take brighter pictures. You can select either MANUAL or MySET mode.

MULTI ( ) : Exposure will be calculated based on an

average of the available light in the image

area. However, the calculation will be

biased towards the centre of the image

area. This is suitable for general use.

SPOT ( ) : Only the rectangular area in the center of

the LCD monitor will be metered for light.

This is suitable when the subject in the

center is exposed correctly,

regardless of the back lighting.

Metering

[ MANUAL mode ]

2048

METERING

MULTI

SPOT

2048

Select the number of pictures in sequential shooting

You can select from AUTO, MANUAL and MySET modes.

- [1 Picture] : Take one picture only

- [2~8 Pictures] : Take a specified number of pictures per

shooting

Continuous shot

If configured pictures are fewer than available pictures for currently memory drive

displayed in LCD sentence incomplete and doesn t make sense,

High resolution and picture quality increases file saving time, which increases stand-by

time.

Select [SHOOTING] menu to inactivate the flash

INFORMATION

Effect

By using the camera s digital processor, it is possible to add special effects to your images.

You can select from MANUAL, MySET, MOVIE CLIP and PORTRAIT modes.

[ MANUAL mode ] [ MOVIE CLIP mode ]

NORMAL : No effect is added to the image.

B & W : Converts the image to black and white.

SEPIA : Captured images will be stored in a sepia tone

(a gradient of yellowish brown colours).

2048

SHOOTING

SINGLE

2 SHOTS

4 SHOTS

8 SHOTS

2272

2048

EFFECT

NORMAL NOR

B&W

SEPIA

2048

EFFECT

NORMAL NOR

B&W

SEPIA

320

30FPS

Sharpness

You can adjust the sharpness of the picture you want to

take. You cannot check the sharpness effect on the LCD

monitor before you take a picture, because this function is

applied only when the captured image is stored on the

memory. You can select from MANUAL, MySET and

NIGHT SCENE modes.

[ MANUAL mode ]

Sub menu Icon Description

VIVID

NORMAL

SOFT

Sub menu Icon Description

CHILDREN

LANDSCAPE

CLOSE-UP

SUNSET

DAWN

BACKLIGHT

FIREWORKS

BEACH&SNOW

2048

SHARPNESS

SOFT

NORMAL

VIVID

320

30FPS

Select the [SCENE] submenu to automatically configure

optimal settings, depending on the selected scene.

Only available in the Scene Mode

Scene

Take a still picture of capturing moving children

Close-up shooting for small objects such as plants and insects

Splendor of the setting sun.

Scenery with green woods or blue sky. Portrait with scenery

background.

Daybreak scenes.

Portrait without shadows caused by back light.

Firework scenes.

For ocean, lake, and beach scenes, and snowscapes.

2048

SHOOTING

SINGLE

LANDSCAPE

CLOSE-UP

SUNSET

2272

The edges of the image are softened.

This effect is suitable for editing images on your PC.

The edges of the image are emphasized. The edges will

appear sharp, but noise may occur in the recorded image.

The edges of the image are sharp.

This is suitable for printing.

Starting play mode

Turn the camera on and select Play mode by pressing the play mode button ( ).

The camera can now play back the images stored in the memory.

If you have turned on the camera by pressing the POWER button, you can press the PLAY

MODE button once to switch to Play mode and press it again to switch to Recording mode.

You can turn the power on with the play mode button.

You can set up the PLAY mode function by using the camera buttons and LCD monitor.

Playing back a still image

1. Select the PLAY mode by pressing the play mode

button ( ).

2. The last image stored on the memory is displayed on

the LCD monitor.

3. Select an image that you want to play back by

pressing the LEFT / RIGHT button.

Press and hold the LEFT or RIGHT button to

play back the images quickly.

Manner mode : Pressing the power button for more than 3 seconds changes the buzzer

and start-up sound setting to OFF, even though you may have set these

to ON. If you wish to hear the buzzer sound and startup sound, set the

[SOUND](SETUP mode) and [S.SOUND](MySET mode) settings to ON.

Even if the camera s power is off, you can start the play mode by pressing the play

mode button.

INFORMATION

Starting play mode

Playing back a movie clip

Steps from 1-2 are the same as those to play back a still

image.

3. Select the recorded movie clip that you want to play back

by using the LEFT/RIGHT button. If you select a movie

clip, the movie clip indicator ( ) will be displayed on the

LCD monitor.

4. Press the play & pause button ( ) to play back a

movie clip file.

- To pause a movie clip file while playing it back, press the

play & pause button again.

- Pressing the play & pause button again will cause the

movie clip file will restart.

- To rewind the movie clip while it is playing, press the

LEFT button. To fast forward the movie clip, press the

RIGHT button.

- To stop playback of the movie clip, press the play & pause button ( ), and then

press the LEFT or RIGHT button.

Playing back a recorded voice

Steps from 1-2 are the same as those to play back a still

image.

3. Select the recorded voice that you want to play back by

using the LEFT/RIGHT button. If you select a recorded

voice file, the voice indicator ( ) will be displayed on

the LCD monitor.

4. Press the play & pause button ( ) to play back a

recorded voice file.

- To pause a recorded voice file, while playing it back,

press the play & pause button again.

- To resume playback of the voice file, press the play & pause button.

- To rewind the voice file while it is playing, press the LEFT button. To fast forward the

voice file, press the RIGHT button.

- To stop playback of the voice file, press the play & pause button, and then press the

LEFT or RIGHT button.

PLAYING

REW FF

PLAYING

REW FF

LCD monitor indicator

The LCD monitor displays information about the shooting conditions.

No. Description Icon Page

1 Battery P.15

2 Play mode

3 File Type

4 Voice memo P.46

5 Protect indicator P.52

6DPOF indicator P.56

7 Stored image number 9

SIZE : 2048X1536 Size

AV : F2.8 Aperture value

TV : 1/60 Shutter speed

ISO : 100 ISO sensitivity

FLASH : OFF Whether or not the

flash is used.

DATE : 03/09/01 Recording date

SIZE : 2048X1536

AV : F2.8

TV : 1/60

ISO : 100

FLASH : OFF

DATE : 04/01/01

If you press the LCD button, you can check the following recording information:

Using the camera buttons to adjust the camera

In Play mode, you can use the buttons on the camera to conveniently set up the Play mode

functions.

Image enlargement

1. Select an image that you want to enlarge and press the enlargement button.

2. Different parts of the image can be viewed by pressing

the 5 function button.

3. Pressing the thumbnail button will zoom back to the

original full sized image.

- You can tell whether the image displayed is an

enlarged view by checking the image enlargement

indicator shown at the bottom left of the LCD monitor.

(If the image is not an enlarged view, the indicator will

not be displayed.) You can also check the area of

enlargement.

- Movie clips and WAV files can’t be enlarged.

- If an image is enlarged, a loss of quality may occur.

Thumbnail ( ) / Enlargement ( ) button

[ Normal display mode ] [ Thumbnail display mode ]

Pressing the thumbnail

button ( )

Pressing the enlargement

button ( )

Highlighted image

You can view multiple pictures, enlarge a selected picture, and crop and save a selected area

of an image.

Thumbnail display

1. While an image is displayed full screen, press the

thumbnail button.

2. The thumbnail display will highlight the image that had

been showing at the time the thumbnail mode was

selected.

3. Press the 5 function button to move to a desired image.

4. To view an image separately, press the enlargement button ( ).

Thumbnail( ) / Enlargement( ) button

The maximum enlargement rate in proportion to the image size.

Trimming : You can extract part of the image that you

want and save it separately.

1. Select an image that you want to enlarge and press the

enlargement button.

2. Different parts of the image can be viewed by pressing

the 5 function button.

3. Press the MENU button and a message will be

displayed as shown alongside.

4. Press the OK button to save the trimmed image with a

new file name. The trimmed image will be displayed on the LCD monitor. Press the LEFT

button to return to the image before it was selected.

- If there is little memory space to save the trimmed image, the image can t be trimmed.

Image size 2272 2048 1600 1024 640

Maximum enlargement rate

8.8 8.0 5.3 4.0 2.2

Voice ( ) memo / Up button

When the menu is displayed on the LCD monitor, pressing the UP button makes the menu

cursor move up.

When the menu is not displayed on the LCD monitor, the UP button operates as the voice

memo button. You can add your audio to a stored still image.

Adding a Voice Memo to a Still Image

1. Press the LEFT/ RIGHT button to select an image that

you wish to add sound to.

2. Press the voice memo button ( ) and the voice memo

indicator will display. The camera is now ready to record

a voice memo.

STOP.SHUTTER

REC

Voice ( ) memo / Up button

3. Press the shutter button to start recording. The [REC]

message will be displayed on the LCD monitor (as

shown) and voice will be recorded to the still image for

10 seconds.

4. The recording can be stopped by pressing the shutter

button again.

5. The ( ) icon will be displayed on the LCD monitor

after voice memo recording has finished.

- Voice memos can’t be recorded onto movie clip files.

- A distance of 40cm between you and the camera

(microphone) is the best distance to record sound.

- The voice memo will be saved in *.wav format, but has

the same file name as the still image to which it

corresponds.

- If you add a new voice memo to the still image that

already has a voice memo, the existing voice memo will be erased.

Play & Pause ( )/ Down button

In Play mode, the play & pause/ down button works as follows:

- If the menu is displayed

Press the DOWN button to move from the main menu to a sub menu, or to move down the

sub menu cursor.

- If a still image with a voice memo, a voice file, or a movie clip is playing

In Stop mode : Plays a still image with a voice memo, a voice file, or a movie clip.

During playback : Temporarily stops playback.

In Pause mode : Resumes playback

[ Voice recording is stopped ] [ Voice recording is paused ][ Voice file is playing ]

PLAY

REW FF PAUSE

REW FF PLAY

REW FF

LEFT / RIGHT/ MENU/ OK button

LEFT / RIGHT/ MENU/ OK buttons activate the following.

- LEFT button : While the menu is showing, press the LEFT button to select the menu

tab to the left of the cursor.

- RIGHT button : While the menu is showing, press the RIGHT button to select the menu

tab to the right of the cursor, or to move an auxiliary menu.

- MENU button : When you press the MENU button, the play mode menu will be

displayed on the LCD monitor. Pressing it again will return the LCD to

the initial display.

- OK button : When the menu is displayed on the LCD monitor, the OK button is used

for confirming data that is changed by using the 5 function button.

The shooting information will be displayed on the LCD monitor.

The last image stored in the memory is displayed on the

LCD monitor by pressing the play mode button.

Pressing the LCD button in the PLAY ( ) mode will

change the display as shown below. [Image & Icons]

[Image & Information] [Image only]

[ Image & Icons ] [ Image & Information ] [ Image only ]

Pressing the LCD button

Pressing

the LCD

button

Pressing

the LCD

button

LCD button

Delete ( ) button

This deletes images stored on the memory card.

Before deleting images from the camera, you should protect ( p.52) or download images

( p.84) to your computer that you wish to keep.

INFORMATION

Deleting Images in Play Mode

1. Select an image that you want to delete by pressing the

LEFT / RIGHT button and press the DELETE ( )

button.

2. A message will display as shown alongside on the LCD

monitor.

3. Press the OK button to delete the image.

The image that precedes the deleted one will then be

displayed on the LCD monitor.

Setting up the play back function using the LCD monitor

PLAY mode functions can be changed by using the LCD monitor.

In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor.

The menus you can set up in Play mode are as follows.

To capture an image after setting up the play menu, press the PLAY button.

Menu tab Main menu Sub menu Secondary menu Page

PROTECT

DELETE

RESIZE

ROTATE

SLIDE

COPY TO MS

COPY TO SD

DPOF

p. 57

p. 54

p. 59

p. 53

p. 59

p. 69

SELECT

ALL PICS

SELECT

ALL PICS

OFF/ 1~10SEC

ON/OFF

CANCEL/ EFFECT1, 2, 3, 4

UNLOCK/ LOCK

1280X960

800X600

LOGO

CANCEL

RIGHT

LEFT

UPDOWN

INTERVAL

REPEAT

EFFECT

SIZE

SELECT

ALL PICS

SELECT

ALL PICS

STANDARD

INDEX

SELECT/ ALL PICS/ CANCEL

NO/ YES

DEFAULT, 3X5, 4X6,

5X7, 8X10, CANCEL

The items indicated by are default settings.

* Menus are subject to change without prior notice.

Starting the slide show

Images can be displayed continuously at pre-set intervals.

You can view the slide show by connecting the camera to an external monitor.

Configure the interval for the slide show: Configure the

length of time to display each picture in the slide show.

1. Press the play mode button and press the menu button.

2. Press the LEFT/ RIGHT button and select the [SLIDE]

menu tab.

3. Select the [INTERVAL] sub menu by pressing the UP/

DOWN button and press the RIGHT button.

4. Use the Up/Down Button to establish the display interval.

- Slide Show Display Interval : OFF, 1 ~10 seconds

5. Use the Right Button to start the slide show. Use the Pause ( ) Button to pause

and resume the slide show.

The loading time depends on the image size and quality.

The slide show will start from an image that was displayed on the LCD monitor.

The [PWR OFF] function can t be activated.

While the slide show is playing, only the first frame of an MOVIE file is displayed.

INFORMATION

Configure slide show repeat mode: Automatically restart the slide show after displaying all

pictures.

Steps 1 and 2 are the same as for the [INTERVAL] section.

3. Select the [REPEAT] sub menu by pressing the UP/

DOWN button and press the RIGHT button.

4. Use the Up/Down Button to select the repeat mode.

[ON] : The slide show will repeat until turned off.

[OFF] : The slide show will not repeat after the first

showing.

5. Press the OK button to confirm the setting.

* Please reset the play interval to start the slide show.

SLIDE

INTERVAL

REPEAT

EFFECT

MOVE: CHANGE:

OFF

SLIDE

INTERVAL

REPEAT

EFFECT

BACK: SET:OK

OFF

Starting the slide show

Protecting images

Configure slide show effects: Unique screen effects can be used for the slide show.

Steps 1 and 2 are the same as for the [INTERVAL] section.

3. Select the [EFFECT] sub menu by pressing the UP/

DOWN button and press the RIGHT button.

4. Use the Up/Down Button to select the type of effect.

[OFF] : Normal display

[EFFECT 1] : Image is displayed slowly

[EFFECT 2] : Image is displayed slowly from the center

outwards

[EFFECT 3] : Image moves from the top left

[EFFECT 4] : Image moves from the bottom right

5. Press the OK button to confirm the setting.

* Please reset the play interval to start the slide show.

This is used to protect specific shots from being accidentally erased (LOCK).

It also unprotects images that have been previously protected (UNLOCK).

Protecting Images

1. Press the play mode button and press the menu button.

2. Press the LEFT/ RIGHT button and select the [PROTECT]

menu tab.

3. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

[SELECT]: Selection window for an image to

protect/release is displayed.

Up/Down/Left/Right: Select an image

Zoom W/T Button: Protect/release the image

Menu Button: The menu screen is changed to the play

mode screen

[ALL PICS]: Protect/release all saved images

Zoom WT Button: Protect/release the images

Menu Button: The menu screen is changed to the play

mode screen

SLIDE

INTERVAL

REPEAT

EFFECT

BACK: SET:OK

CANCEL

EFFECT1

EFFECT2

PROTECT

SELECT PICS

ALL PICS

EXIT:MENU MOVE:

EXIT:MENU

W UNLOCK T

EXIT:MENU

W UNLOCK T

Protecting images

- If you protect an image, the protect icon will be displayed on

the LCD monitor. (An unprotected image has no indicator)

- An image in LOCK mode will be protected from the delete

function or [DEL. ALL] functions, but will NOT be protected

from the [FORMAT] function.

Deleting images

Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be

deleted. Remember that this will permanently delete unprotected images. Important shots

should be stored on a computer before deletion takes place. The startup image is stored in

the camera's internal memory (i.e., not on the memory card) and it will not be deleted even if

you delete all files on the memory card.

Deleting images

1. Press the play mode button and press the menu button.

2. Press the LEFT/ RIGHT button and select the [DELETE]

menu tab.

3. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

[SELECT]: Selection window for an image to delete is

displayed.

Up/Down/Left/Right: Select an image

Zoom T Button: Select the image for deletion.

OK Button: Press the Ok Button to display confirmation

message

Press the OK Button again to delete all unprotected

images

If there aren t protected images, all the images are deleted

and a [NO IMAGE!] message will display.

[ALL PICS]: Displays confirmation window

Press the OK Button again to delete all unprotected

images

If there aren t protected images, all the images are deleted

and a [NO IMAGE!] message will display.

4. After the deletion, the screen will be changed to the play

mode screen.

DELETE

SELECT PICS

ALL PICS

EXIT:MENU MOVE:

DELETE:MENU

SELECT:T

Resize

Change resolution (size) of pictures taken. Select [Logo] to save an image for the start-up

image. The resized image will have a new file name.

1. Press the play mode button and press the menu button.

2. Press the LEFT/ RIGHT button and select the [RESIZE]

menu tab.

3. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

[RESIZE] sub menu : 1280X960, 800X600, LOGO

A large sized image can be resized to a smaller sized image, but not vice versa.

Only still image(JPEG) images can be resized. Movie clip (AVI) and Voice

recording(WAV) files can t be resized.

You can change the resolution of only those files compressed in the JPEG 4:2:2 format.

The resized image will have a new file name. The [LOGO] image is stored not on the

memory card but on the internal memory.

Only one [LOGO] image can be saved. If you save a new [LOGO] image, the existing

startup image will be deleted.

If the memory capacity is insufficient to store the resized image, a [CARD FULL!]

message will display on the LCD monitor and the resized image will not be stored.

INFORMATION

Size 1280X960 800X600 LOGO

2272 O O O

2048 O O O

1600 O O O

1024 X O O

640 X X O

Image Resize Types

RESIZE

1280X960

800X600

LOGO

EXIT:MENU MOVE:

Rotating an image

DPOF

DPOF(Digital Print Order Format) allows you to embed printing information on your memory

card’s DCIM/MISC folder. Select the pictures to be printed and how many prints to make.

The DPOF indicator will display on the LCD monitor when an image that has DPOF

information plays back. Images can then be printed on DPOF printers, or at an increasing

number of photo labs.

This function is not available for Movie clips and Voice recording files.

You can rotate the stored images by 90, 180, or 270 degrees.

1. Press the play mode button and press the menu button.

2. Press the LEFT/ RIGHT button and select the [ROTATE]

menu tab.

3. Select a desired sub menu by pressing the UP/ DOWN

button.

[CANCEL] : Cancel rotation

[RIGHT] : Rotate picture in a clock-wise direction

[LEFT] : Rotate picture in a counter-clock-wise direction

[UPDOWN] : Rotate picture 180 degrees

Picture after 90 degrees CCW

rotation

Picture after 180 degrees

rotation

[Picture after 90 degrees CW

rotation]

4. Press the OK button. The rotated image will be displayed and the menu will disappear.

If you display the rotated image on the LCD monitor, empty spaces may appear to the left

and right of the image.

ROTATE

CANCEL

RIGHT

LEFT

EXIT:MENU MOVE:

DPOF : STANDARD

Images (except for movie clips and voice file) are printed as index type.

1. Press the play mode button and press the menu button.

2. Press the LEFT/ RIGHT button and select the [DPOF]

menu tab.

3. Select the [INDEX] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button.

If [NO] is selected : The image will be printed in standard print format.

If [YES] is selected : The image will be printed in index format.

5. Press the OK button to confirm the setting.

DPOF : INDEX

This function allows you to embed print quantity information on a stored image.

1. Press the play mode button and press the menu button.

2. Press the LEFT/ RIGHT button and select the [DPOF]

menu tab.

3. Select the [STANDARD] menu by pressing the UP/

DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

[SELECT]: Selection window for an image to print is

displayed.

Up/Down/Left/Right: Select an image to print

Zoom W/T Button: Select the number of prints

[ALL PICS] : Configure number of prints for all pictures

except movie and voice.

[CANCEL] : Cancel the print setup

5. Press the OK button to confirm the setting.

If an image carries DPOF instructions, the DPOF

indicator ( ) will show.

DPOF

STANDARD

INDEX

SIZE

EXIT:MENU MOVE:

ONE PIC

DEFAULT

SET:OK

W0 T

DPOF

STANDARD

INDEX

SIZE

BACK: SET:OK

0 PRINTS

DPOF

STANDARD

INDEX

SIZE

BACK: SET:OK

DPOF : PRINT SIZE

You can specify the print size when printing images stored on the memory card.

The print size you set will be applied to all pictures stored on the memory card.

Setting the Print Size

1. Press the play mode button and press the menu button.

2. Press the LEFT/ RIGHT button and select the [DPOF]

menu tab.

3. Select the [PRINT SIZE] menu by pressing the UP/

DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button.

PRINT SIZE : DEFAULT, 3X5, 4X6, 5X7, 8X10, CANCEL

The [DEFAULT] print size varies depending on the printer manufacturer.

For your printer's default value, please refer to the user's guide that came with your printer.

5. Press the OK button to confirm the setting.

DPOF

STANDARD

INDEX

SIZE

BACK: SET:OK

DEFAULT

3X5

4X6

The camera has multi memory slots for both SD Memory Cards (Multimedia Card) and

Memory Stick DUO. Copy contents from one memory card to another while both memory

slots are loaded. [COPY TO MS] menu will be displayed if the current card is an SD Memory

Card (Multimedia Card). [Copy to SD (MMC)] menu will be displayed if the current card is a

Memory Stick DUO. This description is for copying images from an SD Memory Card to

Memory Stick DUO.

Copy Picture

Copy Pictures

1. Press the play mode button and press the menu button.

2. Press the LEFT/ RIGHT button and select the [COPY TO

MS] menu tab.

3. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

[SELECT]: Selection window for an image to copy is

displayed.

Up/Down/Left/Right: Select an image

Zoom T Button: Confirm the selection

Menu Button: Start copying

[ALL PICS] All images are copied after displaying

[PLEASE WAIT!]

4. After copying, the screen will returnk to play mode.

All memory slots need to be loaded for the function.

If the destination is smaller than the source, the remaining files are not copied. Please

delete unneeded files to free up enough memory space before copying.

A 101SSCAM folder will be created for the copying, to avoid duplication of the

100SSCAM folder.The number in front of the SSCAM will increase for each copying

operation (ex. 100SSCAM, 101SSCAM, 102SSCAM )

INFORMATION

COPY TO MS DUO

SELECT PICS

ALL PICS

EXIT:MENU MOVE:

COPY TO MS DUO

SELECT PICS

ALL PICS

EXIT:MENU MOVE:

COPY TO MS DUO

SELECT PICS

ALL PICS

EXIT:MENU MOVE:

PictBridge

You can use the USB cable to connect this camera to a printer that supports PictBridge (sold

separately) and print the stored images directly. Movie clips and voice files cannot be printed.

Connecting the Camera to a Printer

1. Press the POWER button to turn on the camera.

2 In a mode with the exception of Voice Recording mode,

press the MENU button.

3. Press the LEFT/ RIGHT button and select [SETUP]

menu tab.

4. Select [USB] menu by pressing the UP/ DOWN button

and press the RIGHT button.

5. Select [PRINTER] menu by pressing the UP/ DOWN

button and press the OK button.

6. Press the menu button twice and the menu will

disappear.

7. Use the supplied USB cable to connect the camera to the printer as shown below.

8. Turn on the printer to connect the camera to the printer.

If [COMPUTER] is selected at step 5, the camera will not connect to the printer, and the auto-

focus LED will just blink green.

If this happens, disconnect the USB cable and start over from step 2.

PictBridge

Print pictures

1. Connect the camera to the printer to display the screen.

If [USB] submenu in the Setup menu is configured as

[COMPUTER], the previous screen will remain and the

camera will not connect to the printer.

If this happens, change the [USB] submenu to

[PRINTER] (See page 62)

2. After a successful connection, the PictBridge icon will

show at the top left of the LCD and the file to print is

displayed (still image)

Press the Left/Right button to select a picture to print

Press the OK button to print the selected picture

Print Error

Printing is available even if this message is displayed while

printing. Please check the camera and the printer after

printing.

If this message is displayed while printing, please press the

OK button and repeat step 2.

CONNECTING...

USB I/F : PRINT

PRINT:OK

MOVE

NOW PRINTING

WARRNING

ERROR

BACK:OK

Setup menu

In this mode, you can set up basic settings.

You can use the setup menu in all camera modes, except Voice Recording mode.

The items indicated by are default settings.

Menu tab Main menu Sub menu Secondary menu Page

RESET

SERIES

OFF, 1 ~ 3 ~ 10MIN p.65

KOREAN

ENGLISH

FRENCH

GERMAN

SPANISH

ITALIAN

S.CHINESE

T.CHINESE

YES

YY/MM/DD

MM/DD/YY

DD/MM/YY

OFF

DATE

D&TIME

OFF

LOW

MEDIUM

HIGH

04 / 01 / 01 13:00

FILE

PWR OFF

LANGUAG

FORMAT

D & TIME

IMPRINT

SOUND

Setup menu

Menu tab Main menu Sub menu Secondary menu Page

NTSC

PAL

SD/MMC

MS DUO

This function allows the user to select the file naming format.

Assigning File Names

1. In any mode with the exception of Voice Recording mode,

press the MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [FILE NAME] menu by pressing the UP/

DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

[RESET] : After using the reset function, the next file name

will be set from 0001 even after formatting, deleting all or inserting a new

memory card.

[SERIES] : Under this system, the file name will directly follow the last stored file name,

regardless of any actions such as file deletion or formatting.

5. Press the menu button twice and the menu will disappear.

File name

SETUP

FILE

PWR OFF

LANGUAGE

BACK: SET:OK

RESET

SERIES

NOR 2272

File name

The first stored folder name is 100SSCAM, and the first file name is S4300001.

Whenever you store an image, the file number is increased by 1.

The file numbers are named from S4300001 to S4309999 automatically, 9999 files will

be stored in a folder.

The folder number is assigned sequentially from 100 to 999 as follows :

100SSCAM 101SSCAM .... 999SSCAM.

The files used with the memory card conform to the DCF(Design rule for Camera File

systems) format.

INFORMATION

Even if the batteries or AC adapter are removed and inserted again, the power off setting

will be preserved.

Note that the automatic power off function will not operate if the camera is in PC mode,

slide show, playing back a voice recording or movie clip.

INFORMATION

Auto power off

Setting Power Off

1. In any mode with the exception of Voice Recording mode,

press the MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [PWR OFF] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

Selecting [OFF] : The power off function will not operate.

[1~10 MIN]: The power will turn off automatically if not

used for the period of time specified.

5. Press the menu button twice and the menu will disappear.

This function switches the camera off after a set amount of time in order to prevent unnecessary

battery drainage.

SETUP

FILE

PWR OFF

LANGUAGE

BACK: SET:OK

OFF

NOR 2272

Language

Setting Language

1. In any mode other than Voice Recording mode, press the MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [LANGUAGE] menu by pressing the UP/

DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

LANGUAGE sub menu: Korean, English, French,

German, Spanish, Italian, T.Chinese, S.Chinese, Japanese, Russian, Portuguese, Dutch,

Danish, Swedish, Finnish, Thai.

5. Press the menu button twice and the menu will disappear.

Formatting a Memory Card

1. In any mode other than Voice Recording mode, press the MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [FORMAT] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

If [No] is selected : The memory card will not be formatted.

Press the menu button twice and the menu display will disappear.

If [Yes] is selected : A [PLEASE WAIT!] message appears and the memory card will be

formatted. If you ran FORMAT in Play mode, a [NO IMAGE!]

message will appear.

There is a choice of languages that can be displayed on the LCD monitor. Even if the batteries or

AC adapter are removed and inserted again, the language setting will be preserved.

Formatting a memory card

This is used for formatting the memory card. If you run [FORMAT] on the memory card, all

images, including the protected images, will be deleted. Be sure to download important

images to your PC before formatting the memory card.

Be sure to run [FORMAT] on the following types of memory card.

- A new memory card, or an unformatted memory card.

- A memory card that has a file this camera can t recognize or one that has been taken

from another camera.

Always format the memory card using this camera. If you insert a memory card that has

been formatted using other cameras, memory card readers, or PCs, you will get a

[CARD ERROR!] message.

INFORMATION

SETUP

FILE

PWR OFF

LANGUAGE

BACK: SET:OK

ENGLISH0

ENGLISH1

ENGLISH2

NOR 2272

SETUP

PWR OFF

LANGUAGE

FORMAT

BACK: SET:OK

YES

NOR 2272

Setting up the Date/ Time/ Date type

You can change the date and time that will be displayed on the captured images and set up

the date type.

Setting Date/Time & Selecting Date Format

1. In any mode with the exception of Voice Recording mode, press the MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab.

3. Select the [D&TIME] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Use the UP, DOWN, LEFT, and RIGHT buttons to select

the desired submenu value, and then press the OK button.

RIGHT button: Selects the year/month / day/hour / minute

date format.

LEFT button: Moves the cursor to the [D&TIME] main

menu if the cursor is at the first item of the date and time setup.

In all other cases, the cursor will be shifted to the left of its current position.

UP and DOWN buttons: Changes the setting value.

- Date type : [YY/MM/DD] /[MM/DD/YY]/[DD/MM/YY]

5. Press the menu button twice and the menu will disappear.

There is an option to include DATE/TIME on still images.

Date Imprinting

1. In any mode with the exception of Voice Recording mode, press the MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [IMPRINT] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Use the UP and DOWN buttons to select the desired date

imprint type, and then press the OK button.

[OFF] : The DATE & TIME will not be imprinted on

the image file.

[DATE] : Only the DATE will be imprinted on the image file.

[D&TIME] : The DATE & TIME will be imprinted on the image file.

5. Press the menu button twice and the menu will disappear.

Imprinting the recording date

The Date & Time are imprinted at the bottom right side of the still image.

The date will be imprinted as a DATE TYPE setting.

TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the

12 hour clock.

The imprint function is applied only to still images.

INFORMATION

SETUP

LANGUAGE

FORMAT

D & TIME

BACK: SET:OK

04/ 01/ 01

YY/MM/DD

NOR 2272

SETUP

FORMAT

D & TIME

IMPRINT

BACK: SET:OK

OFF

DATE

D & TIME

NOR 2272

Sound

If you set the operation sound to ON, various sounds will be activated for camera startup,

when button are pressed, and if there is a card error, so that you can be aware of the camera

operation status.

Setting Operation Sounds

1. In any mode other than Voice Recording mode, press the

MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [SOUND] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

- [SOUND] sub menu : OFF/LOW/MEDIUM/HIGH

5. Press the menu button twice and the menu will disappear.

You can adjust the LCD brightness.

Adjusting LCD Brightness

1. In any mode other than Voice Recording mode, press the

MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [LCD] menu by pressing the UP/ DOWN button

and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

- [LCD] sub menu : DARK, NORMAL, BRIGHT

5. Press the menu button twice and the menu will disappear.

LCD brightness

SETUP

D & TIME

IMPRINT

SOUND

BACK: SET:OK

OFF

NOR 2272

SETUP

IMPRINT

SOUND

LCD

BACK: SET:OK

DARK

NORMAL

BRIGHT

NOR 2272

Selecting Video out type

The Movie output signal from the camera can be NTSC or PAL.

Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the

camera is connected. PAL mode can support only BDGHI.

Setting the Video Out Type

1. In any mode other than Voice Recording mode, press the

MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [VIDEO] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

- [VIDEO] sub menu : NTSC, PAL

5. Press the menu button twice and the menu will disappear.

NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.

PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,

Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,

Thailand, Norway.

When using a TV as an external monitor, you will need to select the external or AV

channel of the TV.

There will be a digital noise on the external monitor, but it is not a malfunction.

If the image is not in the centre of the screen, use the TV controls to centre it.

When the camera is connected to an external monitor, the menu will be visible on the

external monitor and the menu functions are the same as those indicated on the LCD

monitor.

INFORMATION

Connecting to an external monitor

In RECORDING/ PLAY mode, you can

view the stored still images or movie

clips by connecting the camera to an

external monitor via the A/V cable.

When the camera is connected to an

external monitor, the LCD monitor will

be turned off automatically.

Yellow color-Video

White color-Voice

SETUP

SOUND

LCD

VIDEO

BACK: SET:OK

NTSC

PAL

NOR 2272

Quick view

If you enable Quick View before capturing an image, you can view the image you just

captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is

possible only with still images.

Setting Quick View

1. In any mode other than Voice Recording mode, press the

MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [Q.VIEW] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

[OFF] : The quick view function can’t be activated.

[1 ~ 5 SEC] : The captured image is briefly displayed during the selected time.

5. Press the menu button twice and the menu will disappear.

Initialization(RESET ALL)

SETUP

LCD

VIDEO

Q.VIEW

BACK: SET:OK

2 SEC

NOR 2272

All camera menu and function settings will be restored to their default values. However,

values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed.

Initializing the Camera

1. In any mode other than Voice Recording mode, press the

MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [RESET] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

If [NO] is selected : Settings will not be restored to their defaults.

If [YES] is selected : All settings will be restored to their defaults.

5. Press the menu button twice and the menu will disappear.

SETUP

VIDEO

Q.VIEW

RESET

BACK: SET:OK

YES

NOR 2272

Select card

The camera has multi memory slots for an SD Memory Card (Multi Media Card) and Memory

Stick Duo. Select memory card to use when both memory slots are loaded with a memory

card.

Memory card selection

1. In any mode with the exception of Voice Recording mode,

press the MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [SEL.CARD] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Use the UP and DOWN buttons to select the desired date

imprint type, and then press the OK button.

[SD/MMC] : Selects SD card or Multi Media Card

[MS DUO] : Selects Memory Stick DUO

5. Press the menu button twice and the menu will disappear.

Where only an SD Memory Card or Multi Media Card is loaded, the camera will use the

SD Memory Card or Multimedia Card even if the [MS DUO] option is selected.

Configure the submenu of the [CARD SEL.] menu to use the free space in the auxiliary

memory card when a [CARD FULL !] message is displayed.

INFORMATION

SETUP

Q.VIEW

RESET

CARD SEL

BACK: SET:OK

SD/MMC

MS DUO

NOR 2272

Connecting an External Device (USB)

You can select an external device to which you want to connect the camera using the USB cable.

Selecting an External Device

1. In any mode other than Voice Recording mode, press the

MENU button.

2. Press the LEFT/ RIGHT button and select the [SETUP]

menu tab.

3. Select the [USB] menu by pressing the UP/ DOWN button

and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

COMPUTER : Select this if you want to connect the camera to your PC. Refer to page 83

for instructions on how to connect the camera to your PC.

PRINTER : Select this if you want to connect the camera to your printer. Refer to page

58 for instructions on how to connect the camera to your printer.

5. Press the menu button twice and the menu will disappear.

SETUP

RESET

CARD SEL

USB

BACK: SET:OK

COMPUTER

PRINTER

NOR 2272

Setting up the MYCAM menu

You can set up a start up image, start up sound and shutter sound. Every camera working

mode (with the exception of Voice recording mode) has the MyCAM menu.

Menu tab Main menu Sub menu Page

P.75

P.76

You can select the image that is first displayed on the LCD monitor whenever the camera is

turned on.

Setting a Startup Image

1. In any mode with the exception of Voice Recording mode,

press the MENU button.

2. Press the LEFT/ RIGHT button and select the [MyCAM]

menu tab.

3. Select the [S.IMAGE] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

5. Press the menu button twice and the menu will disappear.

Start up image

Use a saved image for the start-up image with the [LOGO] in the [RESIZE] menu in the

play mode.

The start-up image will not be deleted by deleting all images or [FORMAT] menu.

INFORMATION

MYCAM

S.IMAGE

S.SOUND

SH.SOUD

BACK: SET:OK

2272

Start up sound

You can select the shutter sound.

Selecting the Shutter Sound

1. In any mode other than Voice Recording mode, press the

MENU button.

2. Press the LEFT/ RIGHT button and select the [MYCAM]

menu tab.

3. Select the [SH.SOUND] menu by pressing the UP/

DOWN button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

5. Press the menu button twice and the menu will disappear.

Shutter sound

You can select the sound that is activated whenever the

camera is turned on.

Setting the Startup Sound

1. In any mode other than Voice Recording mode, press the

MENU button.

2. Press the LEFT/ RIGHT button and select the [MYCAM]

menu tab.

3. Select the [S.SOUND] menu by pressing the UP/ DOWN

button and press the RIGHT button.

4. Select a desired sub menu by pressing the UP/ DOWN

button and press the OK button.

5. Press the menu button twice and the menu will disappear.

MYCAM

S.IMAGE

S.SOUND

SH.SOUD

BACK: SET:OK

2272

OFF

SOUND 1

SOUND 2

MYCAM

S.IMAGE

S.SOUND

SH.SOUD

BACK: SET:OK

2272

OFF

SOUND 1

SOUND 2

Important notes

Be sure to observe the following precautions!

This unit contains precision electronic components. Do not use or store this unit in the

following locations.

- Areas exposed to severe changes in temperature and humidity.

- Areas exposed to dust and dirt.

- Areas exposed to direct sunlight or the inside of a vehicle in hot weather.

- Environments where there is high magnetism or excessive vibration.

- Areas with high explosives or highly flammable materials.

Do not let the unit come into contact with dust, vinyl goods, or chemicals, such as

insecticides, for an extended period of time.

Sand can be particularly troublesome to cameras.

- Do not let sand get inside the unit when using it on beaches, coastal dunes, or other areas

where there is lots of sand.

- Doing so may result in failure or may permanently render the unit unusable.

Extremes in temperature may cause problems.

- If the camera is transferred from a cold to a warm and humid environment, condensation

can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at

least 1 hour until all moisture is dispersed. Moisture build up can also occur in the memory

card. If this happens, turn off the camera and remove the memory card. Wait until the

moisture has dispersed.

Caution on Using the Lens

- If the lens is subjected to direct sunlight, it could result in discoloration and deterioration of

the image sensor.

- Pay attention not to get fingerprints or foreign substances on the surface of the lens.

If the digital camera is not used for a long period, an electric discharge can occur. It is a good

idea to remove the batteries and the memory card if you do not intend using the camera for

an extended period of time.

Important notes

If the camera is exposed to an electronic interference, it will turn itself off to protect the

memory card.

Camera Maintenance

- Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies.

If this does not work, lens-cleaning paper with lens cleaning fluid can be used.

Clean the camera body with a soft cloth. Do not allow this camera to come into contact with

solvent materials such as benzol, insecticide, thinners etc. This may damage the body shell

of the camera and also affect its performance. Rough handling can damage the LCD

monitor. Take care to avoid damage and keep the camera in its protective carry case at all

times when not in use.

Do not attempt to disassemble or modify the camera.

Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to

the camera and is not a malfunction.

When images are uploaded or downloaded, the data transfer may be affected by static

electricity. In this case, disconnect and re-connect the USB cable before trying the transfer

again.

Warning indicator

There are several warnings that may appear on the LCD display

Warning indicator Causes Remedy

- Turn off the camera power and turn it

on again

- Insert the memory card again

- Format the memory card (p.66)

- Memory card error

- There is insufficient

memory capacity to take

an image

- There are no images

stored on the memory

card

- A memory card is not

inserted

- The camera can t

recognize the memory

card

- File error

- Memory card error

- There is low battery

capacity

- The memory card is

locked

CARD ERROR !

CARD FULL !

NO IMAGE !

NO CARD !

FILE ERROR !

LOW BATTERY !

CARD LOCKED !

- Insert a new memory card

- Delete unnecessary image files to free

up some memory

- Take images

- Insert a memory card that is holding

some images

- Insert a memory card

- Insert the memory card again

- Turn off the camera power and turn it

on again

- Format the memory card

- Contact a camera service center

- Insert fresh batteries

- MS DUO : Slide the write protect switch to

the bottom of the memory card.

- SD : Slide the write protect switch to the top

of the memory card.

- When taking pictures in

dark places

LOW LIGHT ! - Use a tripod and take pictures in Flash

Photography mode

Before contacting a service center

Please check the following

Symptom Causes Remedy

- Insert fresh batteries

- Connect an AC Power Adapter

- Insert the batteries according to the

polarity marks (+, -).

- There is low battery

capacity

- An AC Power Adapter is

not connected

- Batteries are inserted

incorrectly with the

reverse polarities.

The batteries are exhausted

- The Camera is turned off

automatically.

- The Adapter plug is not

connected securely

- The Camera is being

used in low temperatures

- The memory card is not

inserted

- There is insufficient

memory capacity

-The memory card has

not been formatted

- The memory card is

exhausted

The camera’s power is off

The batteries are exhausted

- The memory card is

locked

- Batteries are inserted

incorrectly with the

reverse polarities.

The camera

doesn t switch

The camera

power ceases

whilst in use

Batteries drain

quickly

Camera does

not take images

when pressing

the Shutter

button

- Insert fresh batteries

- Slide the power switch to reactivate

camera

- Remove and re-insert the plug

- Keep the camera in warm conditions

(i.e. inside a coat or jacket) and only

remove it in order to take images

- After turning the camera off, insert a

new memory card

- Delete unnecessary image files

- Format the memory card (p.66)

- Insert a new memory card

- Turn the camera power on

- Insert fresh batteries

- Refer to [CARD LOCKED!] error

message(p.82)

- Insert the batteries according to the

polarity marks (+, -).

- The camera was stopped

due to a malfunction

The camera

suddenly stops

working while in

use.

- Remove /re-insert batteries and switch

the camera on

Before contacting a service center

Symptom Causes Remedy

- A picture was taken

within 0.8 m from the

subject without setting an

appropriate macro mode.

- Taking a picture beyond

the flash range

- The lens is smudged or

dirty.

- Flash off mode has been

selected

The images are

unclear

The flash does

not fire

- If the subject is closer than 0.8m,

select macro shot mode.

- Take a picture within the flash range

- Clean the lens

- Dis-engage flash off mode

- Reset the date and time correctly- The date and time have

been set incorrectly or

the camera has adopted

the default settings

- Camera malfunction

- Incorrect memory card

format

Incorrect date

and time is

displayed

The camera

buttons do not

operate

A card error has

occurred while

the memory

card is in the

camera.

- Remove /re-insert batteries and switch

the camera on

- Re-format the memory card (p.66)

- Incorrect file name.

(Violation of DCF format)

The images

don't play back

- Do not change the image file name.

Before contacting a service center

Symptom Causes Remedy

- White balance setting is

incorrect.

- Exposure is excessive.

- Cable connection is

incorrect.

- The camera is off.

- There are no batteries,

the batteries are

exhausted or the AC

adapter is not connected.

- The operating system is

not Windows 98, 98SE,

2000, ME, XP/ Mac OS

9.0~10.2. Alternatively

the PC does not support

USB.

- The USB driver is not

installed.

Colour of image

is different to

the original

scene

Images are too

bright

When using the

PC’s explorer,

the [Removable

Disk] file does

not show

- Select appropriate White balance.

- Reset exposure compensation.

- The external monitor has

not been connected

properly with the camera.

- There are incorrect files

in the memory card.

No image on

external

monitor

- Check the connection cables.

- Insert a memory card that has correct

files.

- Check the connection.

- Turn the camera on.

- Insert new batteries or check the

adapter connection.

- Install Windows 98, 98SE, 2000, ME,

XP/ Mac OS 9.0~10.2 to PC that

supports USB.

- Install a [USB Storage Driver].

Hanwha Techwin DIGIMAX430 Digital Camera User Manual D430en 02

Samsung Techwin Co Ltd Digital Camera D430en 02

User Manual

Navigation menu

Namespaces

Views

Navigation