Hanwha Techwin SEP1001RW Baby Camera User Manual 1

Samsung Techwin Co Ltd Baby Camera 1

Contents

User Manual 1

SEW-3037WIf you have additional questions or need further assistance, contact Samsung support at (877) 349-3149. To extend your one year warranty by three months, be sure to go to www.samsungsv.com and register your product.SafeVIEWUser ManualEnglishSEW-3037W-ENGLISH.indd   1 2012-08-17   오후 4:34:23
IMPORTANT SAFETY INSTRUCTIONS1.  Read these instructions.2.  Keep these instructions.3.  Heed all warnings.4.  Follow all instructions.5.  Do not use this apparatus near water.6.  Clean only with dry cloth.7.  Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.8.  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9.  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10.  Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11.  Only use attachments/ accessories specified by the manufacturer.12.  Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13.  Unplug this apparatus during lighting storms or when unused for long periods of time.14.  Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.Copyright©2012 Samsung Techwin Co., Ltd. All rights reserved.Trademark is the registered logo of Samsung Techwin Co., Ltd.  The name of this product is the registered trademark of Samsung Techwin Co., Ltd.Other trademarks mentioned in this manual are the registered trademark of their respective company.RestrictionSamsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.DisclaimerSamsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.SafeVIEWUser ManualSEW-3037W-ENGLISH.indd   2 2012-08-17   오후 4:34:23
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMSFCC Caution :Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1)  This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and monitor.• Connect the equipment into an outlet on a circuit different from that to which the monitor isconnected.• Consult the dealer or an experienced radio/TV technician for help.WARNING• STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cordswithin 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided.• Some adult assembly or installation required.• This product contains small parts that may cause choking. Keep small parts away from children.• This product is NOT intended to replace proper supervision of children. You MUST check yourchild’s activity regularly, as this product will not alert parents to silent activities of a child.• Before using this product, read and follow all instructions contained in this booklet, and read andfollow all instructions and warnings on the product.• NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wetbasement, etc.• This product is intended for indoor use only.• This product is not intended for use as a medical monitor and its use should not replace adultsupervision.• The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from achild. If the child moves outside of this range, if may not be able to detect sounds from him or her.• It is essential that you check the operating range and condition of the transmitter monitor on initialinstallation, and on a regular basis after that.• Check reception regularly. Test monitor before use and after changing camera location.The wireless signal transfer range may be shortened if an obstacle such as aconcrete wall is in between the camera and monitor.• To prevent overheating, keep the product and AC power adapters away from any direct sunlightand heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) andother appliances that produce heat (e.g., amplifiers, televisions and stereos).• Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture thatmay block ventilation.• Use only the AC adapters provided with the product, as other adapters may damage the product.Plug the adapters only into standard household current (100~240 volts AC). Place the AC adapters avoiding pinch points otherwise you can damage the adapters.• When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the ACadapter’s cord.• Do not use extension cords with the AC power adapters to avoid entanglement.• This product should only be serviced by qualified and authorized Samsung service centers.• Images and sounds are transmitted by the product over public airwaves and transmissions maybe picked up by other units.• Caution if you use the system to watch a young child, do not place the camera where the childcan reach.• When using the system with only battery power and the charge is low, then the picture and orsound may affected.• If this occurs then please connect the AC power adapter.SEW-3037W-ENGLISH.indd   3 2012-08-17   오후 4:34:23This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter.A minimum separation distance of 20 ㎝ must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements.
Contents WHAT’S INCLUDEDPackage Contents ………………………………………………… 5 GETTING STARTED Functional Description ……………………………………………… 6Powering your monitor ……………………………………………………… 6Operating the System ……………………………………………………… 6 VIEWING MODE DISPLAY Indicator Description ……………………………………………… 8How to use the indicator …………………………………………………… 8Menu Operation …………………………………………………… 8How to use the setup buttons ……………………………………………… 8How to use the setup icon ………………………………………………… 9 OVERVIEW Getting to know your Monitoring system ……………………… 10Wireless Monitor …………………………………………………………… 10Wireless Camera …………………………………………………………… 12 INSTALLATION How to Install ……………………………………………………… 13Wireless Monitor …………………………………………………………… 13Wireless Camera …………………………………………………………… 13 APPENDIX Specifications …………………………………………………… 14Troubleshooting ………………………………………………… 15SEW-3037W-ENGLISH.indd   4 2012-08-17   오후 4:34:23
English · 501 What’s Included What’s IncludedPackage ContentsThe system comes with the following components:Wireless camera Wireless monitor User Manual & Warranty CardCamera Adapter Monitor Adapter Plastic anchor (1EA) & Screw (1EA)Check your package to confirm that you have received the complete system, including all components shown above.SEW-3037W-ENGLISH.indd   5 2012-08-17   오후 4:34:24
6 · Getting StartedFunctional DescriptionPowering your monitorAfter opening the box, fully charge the monitor before use. After initial charge, recharge as needed.Wireless MonitorYou can use the device while charging with connected adapter, and the device is portable if charged.Wireless CameraThe Wireless Camera must be plugged in at all times in order to view. n `Check if the Power LEDs of wireless monitor is turned on. GettInG started Operating the SystemThe basic operation is as follows:PairingThe units already come paired for your convenience. This button is used to add an additional camera. User can select camera number to assign. Up to 4 Cameras may be paired. 1.  Power on and turn the switch ON. The power LED for the monitor should be ON.2.  Press the [MENU] button on the monitor.3.  Select [   ] by pressing [_] or [+] button.4.  Select camera number by pressing the [$] or [%] button. Press [   ] button to confirm. A pairing icon comes out and search a camera which sets to pairing mode.  A count down clock appears at the middle of top icon bar which starts counting from 30 to 0.5.  Press the [PAIR] button on the camera.6.  Within 30 seconds, if the monitor successfully pairs with the camera, the monitor will automatically switch to the camera's current view.  n `After 30 seconds, if no camera registered, it will show “Out of Range” icon and user needs to switch back to previous camera number through menu operation.SEW-3037W-ENGLISH.indd   6 2012-08-17   오후 4:34:24
English · 702 Getting StartedVoice activated (VOX)Select to monitor significant sound with reduced ambient noise. The screen goes off in “VOX” mode if there is no significant sound louder than a certain level within 1 minute. Meanwhile, the monitor screen turns on as soon as detecting sound around the camera. In “VOX” mode, you can set the sensitivity with [   ] in menu.• H(High) : Sets to higher sensitivity.• L(Low) : Sets to lower sensitivity.Sleep ModePress the [SLEEP] button to turn off the screen and save battery power. Your monitor will continue to detect sound around the camera. Press any button to turn the screen on again.Out of RangeIf the camera and monitor are not paired or if the monitor is outside of transmission range with the paired camera, the “Out of Range” message appears with warning beeps at regular intervals.Two-way talkPress the [TALK] button while talking.Sound levelThe louder the sound around the camera, the more LEDs turn on.Portable monitoringSlide the belt clip upwards to use the integrated belt clip on the monitor. When not in use, please push the clip back to its original position.Night LightPress the [   ] button on the camera or the [   ] button on the wireless monitor to turn on/off night light.Remote PTZYou can remotely control the camera to pan, tilt and digitally zoom.  Use [$/%/_/+] buttons on the monitor to control the camera. Use [ ] from the menu to digitally zoom in.SEW-3036WTALKSEW-3036WSEW-3036W- ON- VOX- OFFDC IN 6VSEW-3037W-ENGLISH.indd   7 2012-08-17   오후 4:34:26
8 · Viewing Mode DisplayIndicator DescriptionHow to use the indicatora b cd gf h i jea  Signal IndicatorThe signal indicator shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal – One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.b  Camera NumberIndicates which camera is being displayed on the current screen. When scan mode is selected, this icon will flash. c  x2 Zoom modeIndicates that current screen is Zoomed in. Use the four directional buttons to pan the camera. Select x1 in the menu to zoom back out. d Night Vision IndicatorIndicates camera night vision mode is turned on. The screen will appear in Black/White in this mode.e Digital ClockDisplays the time that is set on the monitor. It only provides AM / PM time format and no 24hour format.f Night lightIndicates the night light is on.g Monitor Speaker MuteIndicates the monitor speaker is muted. Once the monitor’s speaker is muted, no sound from the camera is produced. h VOX OnIndicates the Power / VOX slide switch position is set at “VOX” mode.i Battery Capacity Level Indicates remaining battery charge. Indicated in 4 levels, and one discharge warning.j ChargingIndicates the battery is charging by DC input power. If battery nearly empty,  it will flash to alert user to charge up the unit.No Signal WarningsThe "Out of Range" message means the monitor cannot access the camera. Please reposition the camera, or check the camera power.Menu OperationHow to use the setup buttonsPress the [MENU] button of the monitor to display the menu screen. Use [$/%/_/+] button to traverse the menu, and press [   ] button to apply the changes. VIeWInG Mode dIsplay SEW-3037W-ENGLISH.indd   8 2012-08-17   오후 4:34:27
English · 903 Viewing Mode Display1.  Press [MENU] button to enter the menu setting or exit the menu setting.2.  Move to other menu by press [_] or [+] button.3.  Adjust option level by [$] or [%] button.4.  Press [   ] button to save and complete. n `If no action more than 20sec, it will be time out back to monitor mode with save.How to use the setup icona b e f g hc da   BrightnessAdjusts the brightness of the image shown. If you are using multiple camera, you can adjust the brightness of each individual camera.b  Camera VOX SensitivityIf not in “VOX” mode, “OFF” is displayed and not to be selected. In VOX mode, you can select “H” (High) or “L” (Low). If set to “H”, monitor can be triggered by lower audio level than “L” setting.c   PairingYou can register a wireless camera with the monitor using the registration menu where you can view the video of the selected wireless camera.d   ZoomZoom in on the current image (2x).  If you are using multiple cameras, you can set the zoom for each camera. e  Select Camera to View and Scan ModeSet which camera is being currently viewed. Each time a different camera is selected, the Brightness, VOX Sensitivity Level, Camera Speaker Volume, and Zoom settings will be saved to that specific camera.  If “SCAN” mode is selected, each of the registered cameras will be viewed in ascending order at 10 second intervals. If one or more cameras are turned off or out of range, the monitor will show the “Out of Range” indicator for the 10 seconds for that particular camera. f  Set Camera Speaker VolumeAdjust the volume of the speaker on the camera in this menu. The volume can be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the quietest. If “MUTE” is selected, no audio will be transmitted to the speaker when the [TALK] button is pressed. g  Time SettingSet the time shown on the monitor. Use the [_] or [+] button to select a field. Use the [$] or [%] button to change the numbers in the selected field. h   ResetChoose <YES> to reset the monitor to factory defaults. All settings including time and paring information will be set to the factory defaults.SEW-3036WSEW-3036W► ►SEW-3036WSEW-3036W►Enter menu setting Move to a menu Adjust level Save the changeSEW-3037W-ENGLISH.indd   9 2012-08-17   오후 4:34:29

Navigation menu