Hanwha Techwin SEP1001RWN Wireless baby video camera User Manual

Hanwha Techwin Co., Ltd. Wireless baby video camera Users Manual

Users Manual

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0074 EMC compliance Ltd. Page: 1 of 1 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. Appendix 6. User manual
SEW-3037WIf you have additional questions or need further assistance, contact Samsung support at (877) 349-3149. To extend your one year warranty by three months, be sure to go to www.samsungsv.com and register your product.SafeVIEWUser ManualEnglishSEW-3037W-ENGLISH.indd 1 2012-08-17 오후 4:34:23
IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.11. Only use attachments/ accessories specified by the manufacturer.12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.13. Unplug this apparatus during lighting storms or when unused for long periods of time.14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.Copyright©2012 Samsung Techwin Co., Ltd. All rights reserved.Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd.Other trademarks mentioned in this manual are the registered trademark of their respective company.RestrictionSamsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.DisclaimerSamsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.SafeVIEWUser ManualSEW-3037W-ENGLISH.indd 2 2012-08-17 오후 4:34:23
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMSFCC Caution :Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and monitor.• Connect the equipment into an outlet on a circuit different from that to which the monitor is connected.• Consult the dealer or an experienced radio/TV technician for help.WARNING• STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided.• Some adult assembly or installation required.• This product contains small parts that may cause choking. Keep small parts away from children.• This product is NOT intended to replace proper supervision of children. You MUST check your child’s activity regularly, as this product will not alert parents to silent activities of a child.• Before using this product, read and follow all instructions contained in this booklet, and read and follow all instructions and warnings on the product. • NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet basement, etc.• This product is intended for indoor use only.• This product is not intended for use as a medical monitor and its use should not replace adult supervision.• The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a child. If the child moves outside of this range, if may not be able to detect sounds from him or her.• It is essential that you check the operating range and condition of the transmitter monitor on initial installation, and on a regular basis after that.• Check reception regularly. Test monitor before use and after changing camera location.The wireless signal transfer range may be shortened if an obstacle such as a concrete wall is in between the camera and monitor.• To prevent overheating, keep the product and AC power adapters away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos).• Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation.• Use only the AC adapters provided with the product, as other adapters may damage the product. Plug the adapters only into standard household current (100~240 volts AC). Place the AC adapters avoiding pinch points otherwise you can damage the adapters.• When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC adapter’s cord.• Do not use extension cords with the AC power adapters to avoid entanglement.• This product should only be serviced by qualified and authorized Samsung service centers.• Images and sounds are transmitted by the product over public airwaves and transmissions may be picked up by other units.• Caution if you use the system to watch a young child, do not place the camera where the child can reach.• When using the system with only battery power and the charge is low, then the picture and or sound may affected.• If this occurs then please connect the AC power adapter. SEW-3037W-ENGLISH.indd 3 2012-08-17 오후 4:34:23
Contents WHAT’S INCLUDEDPackage Contents ………………………………………………… 5 GETTING STARTED Functional Description ……………………………………………… 6Powering your monitor ……………………………………………………… 6Operating the System ……………………………………………………… 6 VIEWING MODE DISPLAY Indicator Description ……………………………………………… 8How to use the indicator …………………………………………………… 8Menu Operation …………………………………………………… 8How to use the setup buttons ……………………………………………… 8How to use the setup icon ………………………………………………… 9 OVERVIEW Getting to know your Monitoring system ……………………… 10Wireless Monitor …………………………………………………………… 10Wireless Camera …………………………………………………………… 12 INSTALLATION How to Install ……………………………………………………… 13Wireless Monitor …………………………………………………………… 13Wireless Camera …………………………………………………………… 13 APPENDIX Specifications …………………………………………………… 14Troubleshooting ………………………………………………… 15SEW-3037W-ENGLISH.indd 4 2012-08-17 오후 4:34:23
English · 501 What’s Included What’s IncludedPackage ContentsThe system comes with the following components:Wireless camera Wireless monitor User Manual & Warranty CardCamera Adapter Monitor Adapter Plastic anchor (1EA) & Screw (1EA)Check your package to confirm that you have received the complete system, including all components shown above.SEW-3037W-ENGLISH.indd 5 2012-08-17 오후 4:34:24
6 · Getting StartedFunctional DescriptionPowering your monitorAfter opening the box, fully charge the monitor before use. After initial charge, recharge as needed.Wireless MonitorYou can use the device while charging with connected adapter, and the device is portable if charged.Wireless CameraThe Wireless Camera must be plugged in at all times in order to view. n `Check if the Power LEDs of wireless monitor is turned on. GettInG started Operating the SystemThe basic operation is as follows:PairingThe units already come paired for your convenience. This button is used to add an additional camera. User can select camera number to assign. Up to 4 Cameras may be paired. 1. Power on and turn the switch ON. The power LED for the monitor should be ON.2. Press the [MENU] button on the monitor.3. Select [ ] by pressing [_] or [+] button.4. Select camera number by pressing the [$] or [%] button. Press [ ] button to confirm. A pairing icon comes out and search a camera which sets to pairing mode. A count down clock appears at the middle of top icon bar which starts counting from 30 to 0.5. Press the [PAIR] button on the camera.6. Within 30 seconds, if the monitor successfully pairs with the camera, the monitor will automatically switch to the camera's current view. n `After 30 seconds, if no camera registered, it will show “Out of Range” icon and user needs to switch back to previous camera number through menu operation.SEW-3037W-ENGLISH.indd 6 2012-08-17 오후 4:34:24
English · 702 Getting StartedVoice activated (VOX)Select to monitor significant sound with reduced ambient noise. The screen goes off in “VOX” mode if there is no significant sound louder than a certain level within 1 minute. Meanwhile, the monitor screen turns on as soon as detecting sound around the camera. In “VOX” mode, you can set the sensitivity with [ ] in menu.• H(High) : Sets to higher sensitivity.• L(Low) : Sets to lower sensitivity.Sleep ModePress the [SLEEP] button to turn off the screen and save battery power. Your monitor will continue to detect sound around the camera. Press any button to turn the screen on again.Out of RangeIf the camera and monitor are not paired or if the monitor is outside of transmission range with the paired camera, the “Out of Range” message appears with warning beeps at regular intervals.Two-way talkPress the [TALK] button while talking.Sound levelThe louder the sound around the camera, the more LEDs turn on.Portable monitoringSlide the belt clip upwards to use the integrated belt clip on the monitor. When not in use, please push the clip back to its original position.Night LightPress the [ ] button on the camera or the [ ] button on the wireless monitor to turn on/off night light.Remote PTZYou can remotely control the camera to pan, tilt and digitally zoom. Use [$/%/_/+] buttons on the monitor to control the camera. Use [ ] from the menu to digitally zoom in.SEW-3036WTALKSEW-3036WSEW-3036W- ON- VOX- OFFDC IN 6VSEW-3037W-ENGLISH.indd 7 2012-08-17 오후 4:34:26
8 · Viewing Mode DisplayIndicator DescriptionHow to use the indicatora b cd gf h i jea Signal IndicatorThe signal indicator shows the strength of the signal being received from the camera. The number of bars in the signal indicator shows the strength of the signal – One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.b Camera NumberIndicates which camera is being displayed on the current screen. When scan mode is selected, this icon will flash. c x2 Zoom modeIndicates that current screen is Zoomed in. Use the four directional buttons to pan the camera. Select x1 in the menu to zoom back out. d Night Vision IndicatorIndicates camera night vision mode is turned on. The screen will appear in Black/White in this mode.e Digital ClockDisplays the time that is set on the monitor. It only provides AM / PM time format and no 24hour format.f Night lightIndicates the night light is on.g Monitor Speaker MuteIndicates the monitor speaker is muted. Once the monitor’s speaker is muted, no sound from the camera is produced. h VOX OnIndicates the Power / VOX slide switch position is set at “VOX” mode.i Battery Capacity Level Indicates remaining battery charge. Indicated in 4 levels, and one discharge warning.j ChargingIndicates the battery is charging by DC input power. If battery nearly empty, it will flash to alert user to charge up the unit.No Signal WarningsThe "Out of Range" message means the monitor cannot access the camera. Please reposition the camera, or check the camera power.Menu OperationHow to use the setup buttonsPress the [MENU] button of the monitor to display the menu screen. Use [$/%/_/+] button to traverse the menu, and press [ ] button to apply the changes. VIeWInG Mode dIsplay SEW-3037W-ENGLISH.indd 8 2012-08-17 오후 4:34:27
English · 903 Viewing Mode Display1. Press [MENU] button to enter the menu setting or exit the menu setting.2. Move to other menu by press [_] or [+] button.3. Adjust option level by [$] or [%] button.4. Press [ ] button to save and complete. n `If no action more than 20sec, it will be time out back to monitor mode with save.How to use the setup icona b e f g hc da BrightnessAdjusts the brightness of the image shown. If you are using multiple camera, you can adjust the brightness of each individual camera.b Camera VOX SensitivityIf not in “VOX” mode, “OFF” is displayed and not to be selected. In VOX mode, you can select “H” (High) or “L” (Low). If set to “H”, monitor can be triggered by lower audio level than “L” setting.c PairingYou can register a wireless camera with the monitor using the registration menu where you can view the video of the selected wireless camera.d ZoomZoom in on the current image (2x). If you are using multiple cameras, you can set the zoom for each camera. e Select Camera to View and Scan ModeSet which camera is being currently viewed. Each time a different camera is selected, the Brightness, VOX Sensitivity Level, Camera Speaker Volume, and Zoom settings will be saved to that specific camera. If “SCAN” mode is selected, each of the registered cameras will be viewed in ascending order at 10 second intervals. If one or more cameras are turned off or out of range, the monitor will show the “Out of Range” indicator for the 10 seconds for that particular camera. f Set Camera Speaker VolumeAdjust the volume of the speaker on the camera in this menu. The volume can be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the quietest. If “MUTE” is selected, no audio will be transmitted to the speaker when the [TALK] button is pressed. g Time SettingSet the time shown on the monitor. Use the [_] or [+] button to select a field. Use the [$] or [%] button to change the numbers in the selected field. h ResetChoose <YES> to reset the monitor to factory defaults. All settings including time and paring information will be set to the factory defaults.SEW-3036WSEW-3036W► ►SEW-3036WSEW-3036W►Enter menu setting Move to a menu Adjust level Save the changeSEW-3037W-ENGLISH.indd 9 2012-08-17 오후 4:34:29
10 · OverviewGetting to know your Monitoring systemWireless MonitorAfter opening the box, fully charge the monitor before use. After initial charge, recharge as needed.Front ControlsMonitor AntennaReceives and sends signals from or to the camera.3.5” LCD ScreenDisplays video from the camera.Sound Level LEDsFlashes when sound is detected.MENU ButtonPress to access from video monitor mode to menu mode operation. In menu mode, press this button will go back to monitor mode with save from selection.SLEEP ButtonUsed to turn on / off the screen by press this button. User can turn on the video again by pressing any buttons.MicrophoneTransmits audio to the camera when [TALK] button is pressed down and held like a walkie talkie.Navigation Controls / OK/Night light ButtonUse the controls to move and select while in ViewingMode, Menu Mode. You can control PTZ operation. Power LEDIndicator turns green when powered. When battery is charging, this LED will in green color. Navigation Controls / ButtonViewing Mode: The following controls are used while watching live video from the camera:• Press the [$] or [%] button to adjust camera’s framing upwards or downwards.• Press the [_] or [+] button to adjust camera’s framing to the left or right.• Press [ ] button to turn on/off the night light.• While in zooming, use [$/%/_/+] button to move the screen around.Menu Mode: Use the [$/%/_/+] button arrows to navigate in Menu Mode. Press the [ ] button to confirm the menu selection. oVerVIeW SEW-3037W-ENGLISH.indd 10 2012-08-17 오후 4:34:30
English · 1104 OverviewBack Controls n `You must have more than one camera configured on the system when using the functions that requires more than one camera.Side ControlsTALK ButtonPress down and hold the button to talk back to the camera. SpeakerProduces the sound transmitted from the camera(s).Belt ClipWhen you carry the monitor, use the belt hanger to hold the monitor onto your belt.Kick StandUse to hold the monitor onto a table.- ON- VOX- OFFDC IN 6VDC 6V Power InputConnect the included AC power adapter to power and/or charge the monitor battery. (when the monitor is not placed in the optional Charge cradle).Volume +/– Button Used for adjusting the volume up/down.Power and VOX ON / OFF Slide SwitchSet this switch to ON or OFF to turn on/off the wireless monitor, and set to VOX to turn on the VOX mode.SEW-3037W-ENGLISH.indd 11 2012-08-17 오후 4:34:31
12 · OverviewWireless CameraFront & Back Controls n `Remotely control Night Light ON or OFF is available only when the camera is paired to the monitor.Side & Bottom ControlsPAIR ButtonPress this button to pair with a monitor.Power Slide SwitchTurns the camera ON or OFF.Night vision sensorDetects light levels where the camera is placed.IR LEDsInfrared LED’s provide viewing in no / low light conditions.MicrophoneReceives sounds for the area near the camera, and transmits sound from the camera to the monitor.SpeakerProduces the sound transmitted from the monitor.Night Light ButtonTurns Night Light ON or OFF. When the camera is powered on, Night Light would be automatically turned on.Camera AntennaSends & receives signals to or from the monitor.DC 6V Power InputConnect the adapter to the camera.SEW-3037W-ENGLISH.indd 12 2012-08-17 오후 4:34:31
English · 1305InstallationHow to InstallCAUTION: If you use the system to watch a young child, do not place the camera in the child's reach. Wireless Monitor1. Place the monitor in a place that will have clear reception with your camera(s).2. Pull out the stand. n `Do not pull up the stand lever with an excessive force.Wireless CameraBefore you install the camera, carefully plan where and how it will be positioned, and where you will route the cable that connects the camera to the power adapter. Before starting permanent installation, verify its performance by observing the image on the monitor when camera is positioned in the same location/position where it will be permanently installed and the monitor is placed in the location where it will be used most of the time.Installation WarningsAim the camera(s) to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to monitor, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight.Avoid installing the camera where there are thick walls or obstructions between the camera and the monitor.STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC Adapters provided.1. Carefully unpack the camera. If you are installing cameras that did not come with the system, please see the pairing camera section of this manual for details on installation.2. Mount the camera to the wall. Mark the position of the screw hole on the wall, and drill hole and insert 1 screw, then firmly attach the camera to the wall by placing the stand over the installed screw and pushing the base downwards. n `To install on a concrete wall, drill a hole and use plastic anchor to fix. `Use the drilling template to drill holes on the wall for camera installation. (Page 17) `The camera can also be placed on a flat surface, such as a table or shelf, and no mounting hardware is required.3. Adjust the viewing angle of the camera. Use the Pan, tilt control from the monitor to adjust the viewing angle of the camera. n `Adjusting the camera with excessive force may damage the unit. InstallatIon SEW-3037W-ENGLISH.indd 13 2012-08-17 오후 4:34:32
14 · AppendixSpecicationsItem DetailsSystem GeneralOperating Frequency Range 2400 MHz~2483.5 MHzTransmitting Power 17dBm MaxMonitor Sensitivity -88dBmType of Spread Spectrum TX FHSSType of Modulation GFSKData Rate 3MbpsTransmission range Outdoor 300 m (Eye of Sight) Weight Gross weight: 930g Wireless CameraImage Sensor Type 1/5” Color CMOS Image SensorEffective Pixel H: 640, V: 480White Balance AutoLens EFL=3.6mm, F=2.8Viewing Angle (Diagonal) 56 degreeIR LED Type/ Night Vision 8pcs IR LED – 940nm / 5mLoud Speaker Output 80dBAPower Requirement DC 6V ± 10%Power Consumption 480mA Condition Night vision mode, motor in motion and talk backVOX level detection High: 50dBA / Low: 60dBAOperating Temperature Range 0°C~+40°CItem DetailsWireless CameraOperating Humidity Range 85% RHEnvironment Rating Indoor use onlyPan Angle 300°Tilt Angle 110°Regulation Compliance FCC/CERoHS Compliance Yes for CE version onlyOther Special Feature Built in Microphone/ SpeakerWeight 214gWireless MonitorDisplay Type/Size Color TFT 3.5”Resolution (Pixel) 320X240 (RGB)Viewing Angle H: 80 degree, V: 100 degreeNumber of Camera Support Up to 4 camerasPower Requirement Adapter : DC 6V ± 10%, Battery : 3.7V Li Ion batteryLoud Speaker Output 80dBAPower Consumption480mA maximum Condition Charging + Speaker with voice at volume 5Operating Temperature Range 0°C~+40°COperating Humidity Range 85% RHEnvironment Rating Indoor use onlyRegulation Compliance FCC/CERoHS Compliance Yes for CE version onlyOther Special Feature Volume control, PairingWeight 167g appendIx SEW-3037W-ENGLISH.indd 14 2012-08-17 오후 4:34:32
English · 15Appendix06TroubleshootingProblem Solution No picture from a camera1. Check all connections to the camera. Make sure the adapter is plugged in.2. Make sure that the cameras and monitor are both ON.3. Make sure that the camera is in range of the monitor.4. Make sure the camera and monitor are paired.5. Adjust the monitor antenna to vertical position.The picture is or has become choppyThe picture may become choppy when experiencing a lower frame rate (i.e. 10 frames per second vs. a higher 20 frames per second).1. Try moving the camera closer to the monitor.2. Remove obstructions between the monitor and camera.3. Adjust the monitor antenna to vertical position.No sounds (even with both units turned on)1. Make sure that the power adapter is connected to the camera.2. The battery on the monitor may be dead, be sure to charge it using the adapter included.3. The monitor may be out of range of the camera; be sure to check if the Range LED in on continuously.Your SafeView is emitting an high pitched noise/feedback.This sound is normal feedback which occurs if the monitor and camera are too close together. Move them further apart. n `Low batteries will cause the supply current to become unstable and will affect the quality of the video/audio. Please charge the battery fully for use for superior video.SEW-3037W-ENGLISH.indd 15 2012-08-17 오후 4:34:32
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.Correct disposal of batteries in this product(Applicable in the European Union and other European countries with separate battery return systems.)This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment. To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. SEW-3037W-ENGLISH.indd 16 2012-08-17 오후 4:34:32
This template is used to install the camera on the wall.TEMPLATECAMERA FRONTScrew holes for the Camera installationSEW-3037W-ENGLISH.indd 17 2012-08-17 오후 4:34:32
SALES NETWORKSAMSUNG TECHWIN CO., LTD.Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745SAMSUNG TECHWIN AMERICA Inc.100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : 1-877-349-3149 www.samsungsv.comSAMSUNG TECHWIN EUROPE LTD.Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPSTEL : +44-1932-45-5300 FAX : +44-1932-45-5325 SEW-3037W-ENGLISH.indd 18 2012-08-17 오후 4:34:32

Navigation menu