Hanwha Techwin SEP1003RWN Wireless Baby Camera User Manual Part 2

Samsung Techwin Co Ltd Wireless Baby Camera Users Manual Part 2

Contents

Users Manual Part 2

Download: Hanwha Techwin SEP1003RWN Wireless Baby Camera User Manual Part 2
Mirror Download [FCC.gov]Hanwha Techwin SEP1003RWN Wireless Baby Camera User Manual Part 2
Document ID2814209
Application IDLeAdDaxKOAIQOm3c9cwekw==
Document DescriptionUsers Manual Part 2
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize273.59kB (3419840 bits)
Date Submitted2015-11-17 00:00:00
Date Available2016-05-15 00:00:00
Creation Date2015-11-16 16:46:45
Producing SoftwareAdobe PDF Library 9.9
Document Lastmod2015-11-16 16:46:45
Document TitleUsers Manual Part 2
Document CreatorAdobe InDesign CS5.5 (7.5.3)

Viewing Mode Display
e x1/x1.5/x2 Zoom mode
Indicates that current screen is Zoomed in. Press [
zoom back out.
Indicator Description
f Night Vision Indicator
Indicates camera night vision mode is turned on.
The screen will appear in Black/White in this mode.
How to use the indicator
] icon on the monitor to
ef g h i j
g VOX On
Indicates you select Low Sound level detection or High Sound level detection in
VOX menu.
h Monitor Speaker Mute
Indicates the monitor speaker is muted. Once the monitor’s speaker is muted,
no sound from the camera is produced.
i Battery Capacity Level
a Signal Indicator
The signal indicator shows the strength of the signal being received from the
camera.
The number of bars in the signal indicator shows the strength of the signal –
One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.
b Digital Clock
Displays the time that is set on the monitor. It only provides AM / PM time
format and no 24hour format.
cC
 amera Number
Indicates which camera is being displayed on the current screen. When scan mode
is selected, this icon will flash.
d Sound level Indicator
Indicate the sound level of the Active Camera.
8 · Viewing Mode Display
Indicates remaining battery charge. Indicated in 4 levels, and one discharge
warning.
j Charging
Indicates the battery is charging by DC input power. If battery nearly empty,
it will flash to alert user to charge up the unit.
k Two-way talk
Press the [
] icon while talking.
No Signal Warnings
The "Out of Range" message means the monitor cannot access the camera.
Please reposition the camera, or check the camera power.
How to use the setup icon
Menu Operation
How to use the function tools
설정을 완료한 후 [
] 아이콘을 눌러 저장하세요.
Live 화면으로 돌아오려면 [
] 아이콘을 누르세요.
Press the screen of the monitor to display the menu screen.
a b c d
Settings
03
a Navigation Controls
Using the navigation [
b Menu Setting
c de
Settings
a Brightness
Adjusts the brightness of the image shown. If you are using multiple camera,
you can adjust the brightness of each individual camera.
] icons, you can control camera angle.
Settings
b Set Camera Speaker Volume
Menu setting mode is including monitor and camera settings.
cM
 onitor Volume
Using the [
] icons, you can adjust the monitor volume.
d Zoom IN / Zoom Out
When x1/x1.5 Zoom mode, the magnifier icon is [
] inside, means press this icon
will zoom in video image. When x2 Zoom mode, the magnifier icon is [
] inside, Settings
means press this icon will zoom out video image.
e Lullaby
Press the icon to turn on and turn off lullabies.
Settings
Adjust the volume of the speaker on the camera in this menu. The volume can
be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the
quietest.
c Time Setting
Set the time shown on the monitor. Use the [
numbers in the selected field.
d Feed Timer
] or [
Set the feed time shown on the monitor. Use the [
the numbers in the selected field.
Viewing Mode Display
e f g
] icon to change the
] or [
] icon to change
English · 9
Settings
e Camera VOX Sensitivity
] icon is not displayed.
If not in “VOX” mode, [
In VOX mode, you can select “Low Sound Level Detection” or “High Sound
Level Detection”. If set to “Low Sound Level Detection”, monitor can be
triggered by lower audio level than “High Sound Level Detection” setting.
• Audio Only Mode :Video will turn on 30 seconds and then video will turn off,
monitor speaker is still playing camera background sound.
• Continuous Video and Audio Mode : Video will not turn off and always
streaming video all the time.
When you press Power Key, Monitor will be automatically switched to Low
Sound Level Detection mode.
• Low Sound Level Detection : Small baby cry level can trigger video to turn on
for 30 seconds, then back to stand-by.
Settings
• High Sound Level Detection : Loud baby cry level can trigger video to turn on
for 10 minutes, then back to stand-by.
Settings
f Pairing
You can register a wireless camera with the monitor using the registration menu
where you can view the video of the selected wireless camera.
g Reset
Choose  to reset the monitor to factory defaults.
All settings except for time information will be reset to the factory defaults.
10 · Viewing Mode Display
Overview
Getting to know your Monitoring system
Wireless Monitor
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front Controls
04
When the monitor is being recharged or monitor has low
electricity, red light flashes.
When the monitor is working, the LED becomes solid
red light.
5” LCD Screen
Microphone
Displays video from the camera.
—— Navigation Controls
Viewing Mode: The following controls are used while watching live video from the camera:
• Press the [
] or [
] icon to adjust camera’s framing upwards or downwards.
• Press the [ ] or [ ] icon to adjust camera’s framing to the left or right.
• Press [
] icon to zoom in/out the screen.
While in zooming, use [
] icon to move the screen around.
Overview
Power LED
Monitor Antenna
Receives and sends signals from or to the camera.
Transmits audio to the camera when [
] icon is
pressed down and held like a walkie talkie.
Menu Mode: Press the [
] icon to confirm the menu selection.
English · 11
Back Controls
Power On/Off
Turn on/off the wireless monitor.
Speaker
Produces the sound transmitted from the camera(s).
DC 5V Power Input
Connect the included AC power adapter to power and/or
charge the monitor battery. (when the monitor is not placed
in the optional Charge cradle).
nn `` You must have more than one camera configured on the system when using the functions that requires more than one camera.
12 · Overview
Belt Clip
When you carry the monitor, use the belt hanger to hold the
monitor onto your belt.
Kick Stand
Use to hold the monitor onto a table.
Wireless Camera
Front & Back Controls
IR LEDs
Infrared LED’s provide viewing in no / low light
conditions.
Microphone
Receives sounds for the area near the camera, and
transmits sound from the camera to the monitor.
Turns Night Light ON or OFF.
When the camera is powered on, Night Light would be
automatically turned on.
Camera Antenna
Sends & receives signals to or from the monitor.
DC 5V Power Input
Connect the adapter to the camera.
Overview
nn `` Remotely control Night Light ON or OFF is available only when the camera is paired to the monitor.
Side & Bottom Controls
Power Slide Switch
Turns the camera ON or OFF.
04
Speaker
Produces the sound transmitted from the monitor.
Night Light Button
PAIR Button
Press this button to pair with a monitor.
Night vision sensor
Detects light levels where the camera is placed.
English · 13
Installation
How to Install
1.
2.
CAUTION: If you use the system to watch a young child, do not place the camera in the
child's reach.
Wireless Monitor
1.
Place the monitor in a place that will have clear
reception with your camera(s).
2.
Pull out the stand.
Carefully unpack the camera.
If you are installing cameras that did not come with the system, please see the
pairing camera section of this manual for details on installation.
Mount the camera to the wall.
Mark the position of the screw hole on the wall, and
drill hole and insert 1 screw, then firmly attach the
camera to the wall by placing the stand over the
installed screw and pushing the base downwards.
install on a concrete wall, drill a hole and use plastic
nn `` Toanchor
to fix.
``
``
Use the drilling template to drill holes on the wall for
camera installation. (Page 18)
The camera can also be placed on a flat surface, such as a table or shelf, and no
mounting hardware is required.
not pull up the stand lever with an excessive
nn `` Do
force.
3.
Wireless Camera
the camera with excessive force may
nn `` Adjusting
damage the unit.
Before you install the camera, carefully plan where and how it will be positioned, and
where you will route the cable that connects the camera to the power adapter.
Before starting permanent installation, verify its performance by observing the image
on the monitor when camera is positioned in the same location/position where it will be
permanently installed and the monitor is placed in the location where it will be used
most of the time.
Installation Warnings
Aim the camera(s) to best optimize the viewing area: Select a location for the camera
that provides a clear view of the area you want to monitor, which is free from dust, and
is not in line-of-sight to a strong light source or direct sunlight.
Avoid installing the camera where there are thick walls or obstructions between the
camera and the monitor.
STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or
cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters.
Only use the AC Adapters provided.
14 · Installation
Adjust the viewing angle of the camera.
Use the Pan, tilt control from the monitor to adjust the
viewing angle of the camera.
Appendix
Operating Temperature Range
0°C~+40°C
Specifications
Environment Rating
Indoor use only
Item
Operating Humidity Range
Item
Operating Frequency Range
Transmitting Power
Monitor Sensitivity
Type of Spread Spectrum TX
Type of Modulation
Data Rate
Transmission range
System General
Details
2400 MHz~2483.5 MHz
17dBm Max
-88dBm
Pan Angle
GFSK
4Mbps
Outdoor 300 m (Eye of Sight)
Wireless Camera
300°
110°
RoHS Compliance
Yes for CE version only
Audio
Weight
FHSS
85% RH
Tilt Angle
Regulation Compliance
FCC/CE
Built in Microphone/ Speaker
218g
Wireless Monitor
Display Type/Size
Color TFT 5”
Resolution
800X480
Viewing Angle
12 o'clock
Digital Zoom
x1, x1.5, x2
+/- 2sec / day
Resolution
H: 1280, V: 1024
Real Time Clock (RTC)
1280x720
MPEG4
Feed Timer Alert
Yes (beep sound)
Number of Camera Support
Up to 4 cameras
Image Compression
White Balance
Lens
Viewing Angle (Diagonal)
IR LED Type/ Night Vision
Lullabies
Night Light
Loud Speaker Output
Power Requirement
Power Consumption
VOX level detection
Auto
EFL=4.5mm, F=2.0
55 degree
Power Requirement
Adapter : DC 5V ± 10%, Battery : 3.8 Li-ion
Loud Speaker Output
1W, 85dB spl
Power Consumption
6.7 Watt (max)
Operating Temperature Range
0°C~+40°C
Yes (only Manual On/Off on camera head)
Operating Humidity Range
85% RH
DC 5V ± 10%
Environment Rating
Indoor use only
Regulation Compliance
FCC/CE
RoHS Compliance
Yes for CE version only
8pcs IR LED – 940nm / 5m
4 songs (Monitor Remote On / Off)
0.8W, 90dB spl
5.1Watt (max)
High: 50dBA / Low: 60dBA
Appendix
1/4” Color CMOS Image Sensor
06
Image Sensor Type
Effective Pixel
Details
English · 15
Audio
Item
Built in Microphone/ Speaker
Other Special Feature
Volume control, Pairing
Battery Type
Li-on
Battery Capacity
2500mAh, Replaceble
Battery time duration
Min 4 hours
Weight
239g (battery inside)
Details
Troubleshooting
Problem
Solution
No picture from a
camera
1.
2.
3.
4.
5.
The picture is or has
become choppy
The picture may become choppy when experiencing a lower frame rate
(i.e. 10 frames per second vs. a higher 20 frames per second).
No sounds (even with
both units turned on)
1. Make sure that the power adapter is connected to the camera.
2. The battery on the monitor may be dead, be sure to charge it using the
adapter included.
3. The monitor may be out of range of the camera; be sure to check if the
Range LED in on continuously.
Your BrightVIEW is
emitting an high
pitched noise/
feedback.
Check all connections to the camera. Make sure the adapter is plugged in.
Make sure that the cameras and monitor are both ON.
Make sure that the camera is in range of the monitor.
Make sure the camera and monitor are paired.
Adjust the monitor antenna to vertical position.
1. Try moving the camera closer to the monitor.
2. Remove obstructions between the monitor and camera.
3. Adjust the monitor antenna to vertical position.
This sound is normal feedback which occurs if the monitor and camera are too
close together. Move them further apart.
batteries will cause the supply current to become unstable and will affect the quality
nn `` Low
of the video/audio. Please charge the battery fully for use for superior video.
16 · Appendix
Samsung cares for the environment at all product manufacturing stages, and is taking
measures to provide customers with more environmentally friendly products.
The Eco mark represents Samsung devotion to creating environmentally friendly products,
and indicates that the product satisfies the EU RoHS Directive.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery
return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their working
life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries
are not properly disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
TEMPLATE
This template is used to install
the camera on the wall.
Screw holes for
the Camera
installation
CAMERA FRONT
SALES NETWORK
HEAD OFFICE
6, Pangyo-ro 319beon-gil, Bundang-gu, Seongnam-si, Gyeonggi-do, 463-400 Rep. of KOREA
Tel : +82-70-7147-8753, 8764 Fax : +82-31-8018-3740
www.samsungsecurity.com
SAMSUNG TECHWIN AMERICA Inc.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Customer support : +1-877-349-3149
www.samsungsv.com
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey,
Surrey, UNITED KINGDOM KT16 OPS
Customer support : 00800-8010-8022
www.samsungsecurehome.eu

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Modify Date                     : 2015:11:16 16:46:45-05:00
Create Date                     : 2015:11:16 16:46:45-05:00
Metadata Date                   : 2015:11:16 16:46:45-05:00
Creator Tool                    : Adobe InDesign CS5.5 (7.5.3)
Format                          : application/pdf
Document ID                     : uuid:f1296828-5cab-46a2-b141-c43a514106ad
Instance ID                     : uuid:0bccd789-d056-441a-8ec9-980acea858d3
Producer                        : Adobe PDF Library 9.9
Page Count                      : 12
Creator                         : Adobe InDesign CS5.5 (7.5.3)
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NLMSEP1003RWN

Navigation menu