Hanwha Techwin SEW-2000W Wireless Receiver User Manual
Samsung Techwin Co Ltd Wireless Receiver
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1658826 |
| Application ID | v0ugZACqpA78aEACZxdBRg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 361.79kB (4522332 bits) |
| Date Submitted | 2012-03-19 00:00:00 |
| Date Available | 2012-03-19 00:00:00 |
| Creation Date | 2012-01-30 13:55:22 |
| Producing Software | Gaaiho PDF |
| Document Lastmod | 2012-03-16 09:50:41 |
| Document Title | Microsoft Word - 47 fcc 아트시스템 표지 |
| Document Creator | Microsoft Word - 47 fcc 아트시스템 표지 |
| Document Author: | Dell |
FCC RF TEST REPORT Report No.: EMC-FCC-R0062 http://www.emc2000.co.kr Appendix 6. User manual EMC compliance Ltd. 480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyeonggi-do, 443-390, Korea 82 31 336 9919 (Main) 82 31 336 4767 (Fax) This test report shall not be reproduced except in full, Without the written approval. WIRELESS CAMERA User Manual English IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. WARNING SEB-1004RW Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/ accessories specified by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. Unplug this apparatus during lighting storms or when unused for long periods of time. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMS This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. PT01-000907A • STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords within 3 feet of crib or playpen. Never use extension cords with adaptors. Only use the adaptors provided. • Some adult assembly or installation required. • This product contains small parts that may cause choking. Keep small parts away from children. • This product is NOT intended to replace proper supervision of children. You MUST check your child’s activity regularly, as this product will not alert parents to silent activities of a child. • Before using this product, read and follow all instructions contained in this booklet, and read and follow all instructions and warnings on the product. • To prevent entanglement with adaptor cords, NEVER PLACE THE CORD IN OR NEAR A CRIB OR PLAYPEN. DO NOT place the product or its adaptor cords within reach of children. • ALWAYS KEEP THE TRANSMITTER, RECEIVER AND ADAPTORS OUT OF REACH OF CHILDREN. • NEVER use the transmitter or receiver near water, including near a bathtub, sink, laundry tub, wet basement, etc. • This product is not intended for use as a medical monitor and its use should not replace adult supervision. • Check reception regularly. Test monitor before use and after changing camera location. • Always unplug adaptors from wall outlets and power sources during periods of non-use. • This appliance and its antenna must not be collocated or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products. The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive. ++Powering camera and receiver Wireless Receiver / Wireless Camera Plug the adaptor power output cable into the 12V DC input of the receiver/camera, and plug the power plug into a wall outlet or surge protector. What’s Included The system comes with the following components: OFF ON PAIR DC IN 12V AV OUT DVR CAMERA ++Pairing camera and receiver This camera will communicate with the receiver once powered on. `` It is highly recommended to pair the camera to the receiver before permanently mounting the camera. Camera 1EA & Receiver 1EA adaptor (2EA) he wireless signal transfer range may be shortened if there exists an obstacle such as a concrete wall between. • To prevent overheating, keep the product and DC power adaptors away from any direct sunlight and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and other appliances that produce heat (e.g., amplifiers, televisions and stereos). • Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that may block ventilation. • Use only the adaptors provided with the product, as other adaptors may damage the product. Plug the adaptors only into standard household current (100~240 volts AC). Place the adaptors avoiding pinch points otherwise you can damage the adapters. • When an adaptor is plugged into a power source, DO NOT touch the exposed end of the adaptor’s cord. • Do not use extension cords with the DC power adaptors to avoid entanglement. • This product should only be serviced by qualified and authorized Samsung service centers. • Images and sounds are transmitted by the product over public airwaves and transmissions may be picked up by other units. • Caution if you use the system to watch a young child, do not place the camera where the child can reach. Getting Started Camera bracket A/V cable 1EA & UTP cable 1EA Screw 3EA & Plastic anchor 3EA User Manual & Warranty Card Wireless Receiver SEB-1004RW Press PAIR button on receiver for 1 second, then a ON message will be displayed on the screen. The receiver will count down from 30~0 – you must press the PAIR button on the camera during this time to PAIR successfully pair the camera. DC IN 12V If the button on the camera is not pressed, the receiver will return to the view screen, and no pairing will take place. Wireless Camera Press the PAIR button on the front of the camera. Once the camera has been paired, it will be immediately viewable on the TV or monitor. ++Installing your camera and receiver Wireless Receiver This receiver can only be desktop or table stand. PAIR OFF Getting to know your monitoring system Wireless Camera 1. Mount the camera to the wall `` Mark the position of the screw holes on the wall, drill holes and insert the supplied plastic anchors, then firmly fix the camera bracket to the plastic anchors with supplied screws. Wireless Receiver ON 2. Adjust the viewing angle of the camera `` You can adjust the viewing angle to monitor desired area by rotating the camera bracket. JJ `` Aim the camera to best optimize the viewing area: Select a location for the camera that provides a clear view of the area you want to receiver, which is free from dust, and is not in line-of-sight to a strong light source or direct sunlight. PAIR OFF DC IN 12V AV OUT Item ++Connecting other device Wireless Receiver Connect one end of the included AV cable to the AV output of receiver, and connect the other end to the Video IN (Yellow) and Audio IN (White) ports on the DVR. `` When connecting the receiver to DVR using A/V cable, connect power adapter to the Receiver. Antenna Power switch Pairing Button 12V Power Input A/V Out Port RJ-45 Jack Power Indicator LED DC IN 12V AV OUT Description Receives signals from the camera. Adjust the antenna to vertical position for better signal reception. Slide the switch to left side to power on the receiver, and to right side to power off the receiver. It is used to pair the camera with receiver. Connect the included DC 12V power adaptor to power the receiver. Connect the included A/V cable to view video on a TV or monitor, or record to a VCR/DVR. Connect the UTP cable to DVR system to view video from the receiver. Red LED is on when power on, blinking red LED is when is pairing. SEB-1004RW DVR CAMERA PAIR Or connect one end of the UTP cable to the RJ-45-Jack, and connect the other end to the DVR. Receiver may be turned on while connecting UTP cable. Item DC Adaptor Jack Microphone OFF ON PAIR DC IN 12V AV OUT DVR CAMERA Antenna IR LEDs Lens CDS Sensor Pairing Button Description Infrared LEDs provide viewing in no/low light conditions Catches the video in front of the lens and transmits video from camera to receiver. Detects illumination condition around camera and emits signal to power on the IR LED when it is in no/low light conditions. It is used to pair the camera with receiver. APPENDIX Wireless Camera OFF ON DVR CAMERA def `` Avoid installing the camera where there are thick walls, or obstructions between the camera and the receiver. PAIR Item Description Sends signals to the receiver. Plug the DC adaptor to the jack for camera’s power supply. Receives sounds from the area near the camera, and transmits sound from the camera to the receiver. Specifications Item Receiving Frequency Range Transmitting Power/ERP Data Rate Receiving Sensitivity Type of Spread Spectrum TX Demodulation Type Transmitting Distance Image Sensor Type Effective Pixels Image Resolution/Frame White Balance Lens Viewing Angle (Diagonal) Minimum Illumination IR LED Type/Night Vision Power Consumption Power Requirement Operating Temperature Operating Humidity Environment Ra ting Dimension Weight Regulation Compliance RoHS Compliance System General Details 2.400GHz~2.480GHz 18dBm Max 2 Mbps -81dBm FHSS 39 Channels GFSK TBD Wireless Camera 1/4” Color CMOS Image Sensor H: 640 V: 480 VGA 640x480@20FPS Auto 3.6mm F=2.0 46 degree 5 Lux without IR LED Illumination 20 LEDs / 850mm 15m (with IR LED) 140mA Max without IR ON 260mA Max with IR ON 12V DC ±5% -10°C ~ 40°C (14°F ~ 104°F) 0% ~ 85% RH IP65 117.5(L)X64.5(W)x115.5(H) mm 355g FCC Yes Camera Housing Material Mounting Stand Material Other Special Feature Resolution Video Output Audio Output Power Requirement Power Consumption Operating Temperature Operating Humidity Environment Rating Dimension Weight Regulation Compliance RoHS Compliance Receiver Housing Material Wireless Receiver Aluminum/ABS Aluminum alloy Built-in Microphone/Night Vision VGA(410 TV line) 1.0Vp-p @75Ωload 1.0Vp-p @600Ωload 12V DC ±5% 140mA -10°C ~ 40°C (14°F ~ 104°F) 0% ~ 85% RH Indoor use only 83(L)x80(W)x25(H) mm 82.5g FCC Yes ABS Troubleshooting Problem Solution 1. Check all connections to the camera. Make sure the adaptor is plugged in. 2. Make sure that the receiver is ON. No picture from a camera 3. Make sure that the camera is in range of the receiver. 4. Make sure the receiver is well connected with TV or monitor. The picture is dropping The picture is or has become choppy 1. Move the camera closer to the receiver. 2. Try repositioning the camera, receiver or both to improve the reception. The picture may become choppy when experiencing a lower frame rate (i.e. 10 frames per second vs. a higher 20 frames per second). 1. Try moving the camera closer to the receiver. 2. Remove obstructions between the receiver and camera. SALES NETWORK SAMSUNG TECHWIN CO., LTD. Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-373-0124 www.samsungsv.com SAMSUNG TECHWIN EUROPE LTD. Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS TEL : +44-1932-45-5300 FAX : +44-1932-45-5325
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Page Mode : UseNone XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Gaaiho PDF Creator Tool : Microsoft Word - 47 fcc 아트시스템 표지 Create Date : 2012:01:30 13:55:22+09:00 Modify Date : 2012:03:16 09:50:41+09:00 Metadata Date : 2012:03:16 09:50:41+09:00 Format : application/pdf Title : Microsoft Word - 47 fcc 아트시스템 표지 Creator : Dell Document ID : uuid:6952562c-f9a9-4e5a-b55d-58e0fdc81fb4 Instance ID : uuid:200816ab-a6de-4001-87cb-017b13a9e8dc Page Count : 3 Author : DellEXIF Metadata provided by EXIF.tools