Hanwha Techwin SEW3036WN Wireless Baby Video Monitor User Manual

Hanwha Techwin Co., Ltd. Wireless Baby Video Monitor Users Manual

Users Manual

Download: Hanwha Techwin SEW3036WN Wireless Baby Video Monitor User Manual
Mirror Download [FCC.gov]Hanwha Techwin SEW3036WN Wireless Baby Video Monitor User Manual
Document ID1793077
Application IDT6h7IRsvscvt43t2VtxTew==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize364.05kB (4550682 bits)
Date Submitted2012-09-17 00:00:00
Date Available2012-09-17 00:00:00
Creation Date2012-08-13 10:08:58
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2012-08-16 11:54:49
Document TitleUsers Manual
Document CreatorMicrosoft® Word 2010
Document Author: maverick

FCC TEST REPORT
Report No.: EMC-FCC-R0071
http://www.emc2000.co.kr
Appendix 6.
User manual
EMC compliance Ltd.
Page: 1 of 1
480-5 Shin-dong, Yeongtong-gu, Suwon-city, Gyunggi-do, 443-390, Korea
82 31 336 9919 (Main) 82 31 336 4767 (Fax)
This test report shall not be reproduced except in full, Without the written approval.
BabyVIEW
User Manual
If you have additional questions or need further assistance, contact Samsung support at (877) 349-3149.
To extend your one year warranty by three months, be sure to go to www.samsungsv.com and register your product.
SEW-3036W
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
3.
Heed all warnings.
2.
4.
5.
6.
7.
BabyVIEW
User Manual
Copyright
©2012 Samsung Techwin Co., Ltd. All rights reserved.
Trademark
is the registered logo of Samsung Techwin Co., Ltd.
The name of this product is the registered trademark of Samsung Techwin Co., Ltd.
Other trademarks mentioned in this manual are the registered trademark of their
respective company.
Restriction
Samsung Techwin Co., Ltd shall reserve the copyright of this document. Under no
circumstances, this document shall be reproduced, distributed or changed, partially or
wholly, without formal authorization of Samsung Techwin.
Disclaimer
Samsung Techwin makes the best to verify the integrity and correctness of the contents
in this document, but no formal guarantee shall be provided. Use of this document
and the subsequent results shall be entirely on the user’s own responsibility. Samsung
Techwin reserves the right to change the contents of this document without prior notice.
8.
9.
Keep these instructions.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings, Install in accordance with the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Only use attachments/ accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for
long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY
TERMS
FCC Caution :
Any Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions :
(1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note :
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and monitor.
• Connect the equipment into an outlet on a circuit different from that to which the monitor is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING
• STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or cords
within 3 feet of crib or playpen. Never use extension cords with AC Adapters. Only use the AC
Adapters provided.
• Some adult assembly or installation required.
• This product contains small parts that may cause choking. Keep small parts away from children.
• This product is NOT intended to replace proper supervision of children. You MUST check your
child’s activity regularly, as this product will not alert parents to silent activities of a child.
• Before using this product, read and follow all instructions contained in this booklet, and read and
follow all instructions and warnings on the product.
• NEVER use the transmitter or monitor near water, including near a bathtub, sink, laundry tub, wet
basement, etc.
• This product is intended for indoor use only.
• This product is not intended for use as a medical monitor and its use should not replace adult
supervision.
• The transmitter detects normal sound levels within a range of 2 to 3 meters (6 to 10 feet) from a
child. If the child moves outside of this range, if may not be able to detect sounds from him or her.
• It is essential that you check the operating range and condition of the transmitter monitor on initial
installation, and on a regular basis after that.
• Check reception regularly. Test monitor before use and after changing camera location.
The wireless signal transfer range may be shortened if an obstacle such as a
concrete wall is in between the camera and monitor.
• To prevent overheating, keep the product and AC power adapters away from any direct sunlight
and heat sources such as radiators, heat registers, cooking devices (e.g., stoves and ovens) and
other appliances that produce heat (e.g., amplifiers, televisions and stereos).
• Ensure that the product is well ventilated during use. Avoid contact with pillows and furniture that
may block ventilation.
• Use only the AC adapters provided with the product, as other adapters may damage the product.
Plug the adapters only into standard household current (100~240 volts AC).
Place the AC adapters avoiding pinch points otherwise you can damage the adapters.
• When an AC adapter is plugged into a power source, DO NOT touch the exposed end of the AC
adapter’s cord.
• Do not use extension cords with the AC power adapters to avoid entanglement.
• This product should only be serviced by qualified and authorized Samsung service centers.
• Images and sounds are transmitted by the product over public airwaves and transmissions may
be picked up by other units.
• Caution if you use the system to watch a young child, do not place the camera where the child
can reach.
• When using the system with only battery power and the charge is low, then the picture and or
sound may affected.
• If this occurs then please connect the AC power adapter.
Contents
What’s Included
Package Contents…………………………………………………… 5
Getting Started
Functional Description………………………………………………… 6
Powering your monitor………………………………………………………… 6
Operating the System………………………………………………………… 6
Viewing Mode Display
Indicator Description………………………………………………… 8
How to use the indicator……………………………………………………… 8
Menu Operation……………………………………………………… 8
How to use the setup buttons………………………………………………… 8
How to use the setup icon…………………………………………………… 9
Overview
Getting to know your Monitoring system………………………… 10
Wireless Monitor……………………………………………………………… 10
Wireless Camera……………………………………………………………… 12
Installation
How to Install………………………………………………………… 13
Wireless Monitor……………………………………………………………… 13
Wireless Camera……………………………………………………………… 13
Appendix
Specifications……………………………………………………… 14
Troubleshooting…………………………………………………… 15
01
What’s Included
What’s Included
Package Contents
The system comes with the following components:
SEW-3036W
SEW-3036W
Wireless camera
Wireless monitor
User Manual & Warranty Card
Camera Adapter
Monitor Adapter
Screws (2EA) & Plastic anchors (2EA)
Check your package to confirm that you have received the complete system, including all components shown above.
English · 5
Getting Started
Functional Description
After opening the box, fully charge the monitor before use. After initial charge, recharge
as needed.
- ON
- OFF
DC IN 6V
Wireless Camera
The Wireless Camera is supposed to be supplied with power at all times.
Wireless Monitor
You can use the device while charging with connected adapter, and the device is
portable if charged.
nn `` Check if the Power LEDs of wireless camera and wireless monitor are turned on.
6 · Getting Started
The basic operation is as follows:
Pairing
The units already come paired for your convenience. This button is
used to add an additional camera. User can select camera number
to assign. Up to 4 Cameras may be paired.
SEW-3036W
PAIRING
Powering your monitor
Operating the System
1.
Power on and turn the switch ON.
The power LED for the camera and monitor should be ON.
2.
Press the [MENU] button on the monitor.
3.
Select [
4.
Select camera number by pressing the [$] or [%] button. Press [
] button to
confirm.
A pairing icon comes out and search a camera which sets to pairing mode.
A count down clock appears at the middle of top icon bar which starts counting
from 30 to 0.
5.
Press the [PAIRING] button on the camera.
6.
Within 30 seconds, if the monitor successfully pairs with the camera, the monitor
will automatically switch to the camera's current view.
] by pressing [_] or [+] button.
30 seconds, if no camera registered, it will show “Out of Range” icon and user
nn `` After
needs to switch back to previous camera number through menu operation.
Voice activated (VOX)
Zoom
• H(High) : Sets to higher sensitivity.
• L(Low) : Sets to lower sensitivity.
Sound level
Press the [
] button on the monitor to zoom in on the current
screen. Press the button again to zoom back out.
SEW-3036W
Press the [SLEEP] button to turn off the screen and save battery
power. Your monitor will continue to detect sound around the
camera. Press any button to turn the screen on again.
Portable monitoring
Slide the belt clip upwards to use the integrated belt clip on the
monitor. When not in use, please push the clip back to its original
position.
Getting Started
The louder the sound around the camera, the more LEDs turn on.
Sleep Mode
Out of Range
02
Select to monitor significant sound with reduced ambient noise.
The screen goes off in “VOX” mode if there is no significant sound
louder than a certain level within 1 minute. Meanwhile, the monitor
screen turns on as soon as detecting sound around the camera. In
SEW-3036W
] in menu.
“VOX” mode, you can set the sensitivity with [
- ON
- VOX
- OFF
SEW-3036W
If the camera and monitor are not paired or if the monitor is outside
of transmission range with the paired camera, the “Out of Range”
message appears with warning beeps at regular intervals.
DC IN 6V
Two-way talk
Press the [TALK] button while talking to transfer audio to the camera.
TALK
English · 7
Viewing Mode Display
e Digital Clock
Displays the time that is set on the monitor. It only provides AM / PM time
format and no 24hour format.
Indicator Description
f Monitor Speaker Mute
Indicates the monitor speaker is muted. Once the monitor’s speaker is muted,
no sound from the camera is produced.
How to use the indicator
a b cd
g VOX On
Indicates the Power / VOX slide switch position is set at “VOX” mode.
fg h i
h Battery Capacity Level
Indicates how much battery capacity left. Total 4 levels plus one empty warning.
i Charging
SEW-3036W
Indicates the battery is charging by DC input power. If battery nearly empty,
it will flash to alert user to charge up the unit.
No Signal Warnings
The "Out of Range" message means the monitor cannot access the camera.
Please reposition the camera, or check the camera power.
a Signal Indicator
The signal indicator shows the strength of the signal being received from the
camera.
The number of bars in the signal indicator shows the strength of the signal –
One or no bars indicate the signal is poor, and 5 bars indicate a strong signal.
SEW-3036W
bC
 amera Number
Indicates which camera is being displayed on the current screen. Press the [+]
button on the monitor to switch between available cameras. When scan mode is
selected, this icon will flash.
cx
 2 Zoom mode
Indicates that current screen is Zoomed in. Use the four directional buttons to
] button to zoom back out.
pan the camera. Press the [
d Night Vision Indicator
Indicates camera night vision mode is turned on.
The screen will appear in Black/White in this mode.
8 · Viewing Mode Display
SEW-3036W
Menu Operation
How to use the setup buttons
SEW-3036W
Press the [MENU] button of the monitor to display the menu screen.
Use [$/%/_/+] button to traverse the menu, and press [
] button to apply the
changes.
SEW-3036W
SEW-3036W
SEW-3036W
SEW-3036W
►
►
►
Enter menu Move to a Adjust level
setting
menu
Save the
change
1.
Press [MENU] button to enter the menu setting or exit the menu setting.
2.
Move to other menu by press [_] or [+] button.
3.
Adjust option level by [$] or [%] button.
4.
Press [
nn ``
] button to save and complete.
If no action more than 20sec, it will be time out back to monitor mode with save.
e Camera Select/Scan Mode
Set which camera is being currently viewed. Each time a different camera is
selected, the Brightness, VOX Sensitivity Level, Camera Speaker Volume, and
Zoom settings will be saved to that specific camera.
If “SCAN” mode is selected, each of the registered cameras will be viewed in
ascending order at 10 second intervals. If one or more cameras are turned off
or out of range, the monitor will show the “Out of Range” indicator for the 10
seconds for that particular camera.
f Set Camera Speaker Volume
Adjust the volume of the speaker on the camera in this menu. The volume can
be adjusted from 1 to 5, with 5 being the loudest setting and 1 being the
quietest. If “MUTE” is selected, no audio will be transmitted to the speaker when
the [TALK] button is pressed.
g Time Setting
Set the time shown on the monitor. Use the [_] or [+] button to select a field.
Use the [$] or [%] button to change the numbers in the selected field.
ab c d e fgh
a Brightness
h Reset
Choose  to reset the monitor to factory defaults. All settings including
time and paring information will be set to the factory defaults.
Viewing Mode Display
SEW-3036W
Zoom in on the current image (2x).
If you are using multiple cameras, you can set the zoom for each camera.
03
How to use the setup icon
d Zoom
Adjusts the brightness of the image shown. If you are using multiple camera,
you can adjust the brightness of each individual camera.
bC
 amera VOX Sensitivity
If not in “VOX” mode, “OFF” is displayed and not to be selected.
In VOX mode, you can select “H” (High) or “L” (Low). If set to “H”, monitor can
be triggered by lower audio level than “L” setting.
c Pairing
You can register a wireless camera with the monitor using the registration menu
where you can view the video of the selected wireless camera.
English · 9
Overview
Getting to know your Monitoring system
Wireless Monitor
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front Controls
Monitor Antenna
MENU Button
Press to access from video monitor mode to menu
mode operation. In menu mode, press this button will go
back to monitor mode with save from selection.
Receives and sends signals from or to the camera.
3.5” LCD Screen
Displays video from the camera.
Sound Level LEDs
SLEEP Button
Used to turn on / off the screen by press this button.
User can turn on the video again by pressing any buttons.
SEW-3036W
Flashes when sound is detected.
Microphone
Transmits audio to the camera when [TALK] button is
pressed down and held like a walkie talkie.
Power LED
SEW-3036W
Indicator turns green when powered.
When battery is charging, this LED will in green color.
Navigation Controls / OK/ZOOM Button
SEW-3036W
—— Navigation Controls /
Button
Viewing Mode: The following controls are used while watching live video from the camera:
• Press the [$] or [%] buttons to increase or decrease the volume.
• Press the [+] button to switch to the next connected camera’s screen.
• Press the [
] button to zoom in / out the screen.
10 · Overview
Use the controls to move and select while in Viewing
Mode, Menu Mode and Zoom Mode.
Menu Mode: Use the [$/%/_/+] button arrows to navigate in Menu Mode.
] button to confirm the menu selection.
Press the [
Zoom Mode: While in zooming, use [$/%/_/+] button to move the screen around.
Back Controls
TALK Button
Belt Clip
Press down and hold the button to talk back to the camera
currently being displayed on the LCD screen.
When you carry the monitor, use the belt hanger to hold the
monitor onto your belt.
Kick Stand
Speaker
Produces the sound transmitted from the camera(s).
Use to hold the monitor onto a table.
- ON
- VOX
- OFF
DC IN 6V
04
nn `` You must have more than one camera configured on the system when using the functions that requires more than one camera.
Overview
Side Controls
Power and VOX ON / OFF Slide Switch
Set this switch to ON or OFF to turn on/off the wireless monitor,
and set to VOX to turn on the VOX mode.
DC 6V Power Input
Connect the included AC power adapter to power and/or
charge the monitor battery.
(when the monitor is not placed in the optional Charge cradle).
English · 11
Wireless Camera
Front & Back Controls
IR LEDs
Camera Antenna
Infrared LED’s provide viewing in no / low light
conditions.
Microphone
Receives sounds for the area near the camera, and
transmits sound from the camera to the monitor.
Sends & receives signals to or from the monitor.
- ON
- OFF
DC 6V Power Input
- ON
- OFF
DC IN 6V
DC IN 6V
Connect the adapter to the camera.
Speaker
Produces the sound transmitted from the monitor.
Side Controls
PAIRING Button
Power LED
Press this button to pair with a monitor.
LED turns on when powered.
Power Slide Switch
Turns the camera ON or OFF.
12 · Overview
PAIRING
PAIRING
Night vision sensor
Detects light levels where the camera is placed.
Installation
How to Install
1.
2.
CAUTION: If you use the system to watch a young child, do not place the camera in the
child's reach.
Wireless Monitor
1.
Place the monitor in a place that will have clear
reception with your camera(s).
2.
Pull out the stand.
``
``
Use the drilling template to drill holes on the wall
for camera installation. (Page 17)
The camera can also be placed on a flat surface, such as a table or shelf, and no
mounting hardware is required.
Adjust the viewing angle of the camera.
When adding cameras that were not included in
the original box, you will need to pair up the
cameras with the monitor.
Installation
can install additional cameras (maximum of
nn `` You
4 cameras).
05
3.
Before you install the camera, carefully plan where and how it will be positioned, and
where you will route the cable that connects the camera to the power adapter.
Before starting permanent installation, verify its performance by observing the image
on the monitor when camera is positioned in the same location/position where it will be
permanently installed and the monitor is placed in the location where it will be used
most of the time.
Mount the camera to the wall.
Mark the position of the screw holes on the wall,
and drill holes and insert 2 screws, then firmly
attach the camera to the wall by placing the
stand over the installed screws and pushing the
base downwards.
install on a concrete wall, drill a hole and use
nn `` Toplastic
anchor to fix.
not pull up the stand lever with an excessive
nn `` Do
force.
Wireless Camera
Carefully unpack the camera.
If you are installing cameras that did not come with the system, please see the
pairing camera section of this manual for details on installation.
Installation Warnings
Aim the camera(s) to best optimize the viewing area: Select a location for the camera
that provides a clear view of the area you want to monitor, which is free from dust, and
is not in line-of-sight to a strong light source or direct sunlight.
Avoid installing the camera where there are thick walls or obstructions between the
camera and the monitor.
STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or
cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters.
Only use the AC Adapters provided.
English · 13
Appendix
Specifications
Item
System General
Operating Frequency Range
2400 MHz~2483.5 MHz
Monitor Sensitivity
-88dBm
Transmitting Power
Type of Spread Spectrum TX
Type of Modulation
Data Rate
Transmission range
Weight
Details
Item
Wireless Camera
Details
Regulation Compliance
FCC/CE
RoHS Compliance
Yes for CE version only
Other Special Feature
Built in Microphone/ Speaker
Display Type/Size
Color TFT 3.5”
Resolution (Pixel)
320X240 (RGB)
Viewing Angle
H: 80 degree, V: 100 degree
Number of Camera Support
Up to 4 cameras
Power Requirement
Adapter : 6 ±10%, Battery : 3.7V Li Ion battery
H: 640, V: 480
Loud Speaker Output
80dBA
45dBA
EFL=3.0mm, F=2.8
17dBm Max
FHSS
GFSK
3Mbps
Outdoor 250 m (Eye of Sight)
Gross weight: 861g, Net weight: 415g
Wireless Camera
Wireless Monitor
Image Sensor Type
1/5” Color CMOS Image Sensor
White Balance
Auto
Loud Speaker Noise level
56 degree
Power Consumption
480mA maximum Condition Charging + Speaker with voice at volume 5
Operating Temperature Range
-10~40degree C
Operating Humidity Range
85% RH
Environment Rating
Indoor use only
Regulation Compliance
FCC/CE
RoHS Compliance
Yes for CE version only
Other Special Feature
Volume control, Pairing
Battery Type
3.7V Li-polymer
Battery Capacity
1100mAh
Effective Pixel
Lens
Viewing Angle (Diagonal)
IR LED Type/ Night Vision
Loud Speaker Output
Power Requirement
Power Consumption
VOX level detection
Operating Temperature Range
Operating Humidity Range
Environment Rating
14 · Appendix
8pcs IR LED – 940nm /5m
80dBA
6V ±10%
480mA Condition Night vision mode and talk back.
High: 55dBA / Low: 65dBA
-10~40 degree C
85% RH
Indoor use only
Troubleshooting
Problem
Solution
No picture from a
camera
1.
2.
3.
4.
5.
The picture is or has
become choppy
The picture may become choppy when experiencing a lower frame rate
(i.e. 10 frames per second vs. a higher 20 frames per second).
No sounds (even with
both units turned on)
1. Make sure that the power adapter is connected to the camera.
2. The battery on the monitor may be dead, be sure to charge it using the
adapter included.
3. The monitor may be out of range of the camera; be sure to check if the
Range LED in on continuously.
1. Try moving the camera closer to the monitor.
2. Remove obstructions between the monitor and camera.
3. Adjust the monitor antenna to vertical position.
batteries will cause the supply current to become unstable and will affect the quality
nn `` Low
of the video/audio. Please charge the battery fully for use for superior video.
Appendix
This sound is normal feedback which occurs if the monitor and camera are too
close together. Move them further apart.
06
Your BabyView is
emitting an high
pitched noise/
feedback.
Check all connections to the camera. Make sure the adapter is plugged in.
Make sure that the cameras and monitor are both ON.
Make sure that the camera is in range of the monitor.
Make sure the camera and monitor are paired.
Adjust the monitor antenna to vertical position.
English · 15
Samsung Techwin cares for the environment at all product manufacturing stages, and is
taking measures to provide customers with more environmentally friendly products.
The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly
products, and indicates that the product satisfies the EU RoHS Directive.
Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery
return systems.)
This marking on the battery, manual or packaging indicates that the batteries in this
product should not be disposed of with other household waste at the end of their working
life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains
mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries
are not properly disposed of, these substances can cause harm to human health or the
environment.
To protect natural resources and to promote material reuse, please separate batteries from
other types of waste and recycle them through your local, free battery return system.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection
systems)
This marking on the product, accessories or literature indicates that the product and
its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of
with other household waste at the end of their working life. To prevent possible harm
to the environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take these items
for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.
50mm [2 inch]
TEMPLATE
This template is used to install
the camera on the wall.
Screw holes for
the Camera
installation
CAMERA FRONT
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
Samsungtechwin R&D Center, 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400
TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745
SAMSUNG TECHWIN AMERICA Inc.
100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660
Toll Free : 1-877-349-3149
www.samsungsv.com
SAMSUNG TECHWIN EUROPE LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey,
Surrey, UNITED KINGDOM KT16 OPS
TEL : +44-1932-45-5300 FAX : +44-1932-45-5325

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Tagged PDF                      : No
XMP Toolkit                     : 3.1-702
Create Date                     : 2012:08:13 10:08:58+09:00
Creator Tool                    : Microsoft® Word 2010
Modify Date                     : 2012:08:16 11:54:49+09:00
Metadata Date                   : 2012:08:16 11:54:49+09:00
Format                          : application/pdf
Creator                         : maverick
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:30beaaaa-575b-4b02-8537-4dc698aea60f
Instance ID                     : uuid:ad13b7d4-8d69-410a-9bc3-f0dcc644853d
Page Count                      : 19
Language                        : ko-KR
Author                          : maverick
EXIF Metadata provided by EXIF.tools
FCC ID Filing: NLMSEW3036WN

Navigation menu