Hanwha Techwin SNHE6440BN Home Smart Camera User Manual

Samsung Techwin Co Ltd Home Smart Camera

User Manual

http://www.emc2000.co.kr FCC TEST REPORT Report No.: EMC-FCC-R0176 EMC compliance Ltd. 65, Sinwon-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 443-390, Korea 82-31-336-9919 (Main) 82-505-299-8311 (Fax) This test report shall not be reproduced, except in full, Without the written approval. User Manual
SAMSUNG SMARTCAMUser Manual SNH-E6440BN0678!
SPECIFY SERVICE INSTRUCTIONS AND WARRANTY TERMSThis device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT.SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.Operational Description The operational description shall fulfil the requirements of Rule Part 2.1033(b)(4). The rule part requires, "A brief description of the circuit functions of the device along with a statement describing how the device operates. This statement should contain a description of the ground system and antenna, if any, used with the device". The above requirement has been further interpreted by the FCC to mean that the description shall:a. be an operational or technical description of how the device operates, is modulated and meets requirements;b. describe the EUT completely. What is it (in plain English as well as technical terms)? Give a clear, concise functional description of device operation.c. always describe the signal, such as modulation type, pulse repetition rate, signal type and information being sent. Describe all modulation types and all data rates.Instructions & WarrantyThe manufacturer is not responsible for any loss or radio/TV interference caused by unauthorized modification of the product.Such modification will void the warranty of the product as well as the user’s right of use.WARNING• The product must be assembled and installed by an adult.• Before using, read all instructions on this manual thoroughly and follow operational instructions, warnings on this manual and printed on the product.• To avoid entangled power cord, do not place it around the baby bed or other infant furniture. Keep this product and its power cord out of children’s reach.Copyright©2014 Samsung Techwin Co., Ltd. All rights reserved.Trademark is the registered logo of Samsung Techwin Co., Ltd. The name of this product is the registered trademark of Samsung Techwin Co., Ltd.Other trademarks mentioned in this manual are the registered trademark of their respective company.RestrictionSamsung Techwin Co., Ltd shall reserve the copyright of this document. Under no circumstances, this document shall be reproduced, distributed or changed, partially or wholly, without formal authorization of Samsung Techwin.DisclaimerSamsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility. Samsung Techwin reserves the right to change the contents of this document without prior notice.Samsung SmartCamUser Manual
• Especially, the power cord should be installed carefully while keeping it out of children’s reach.• Never use the product near bath tub, sink, washing machine and in wet basement to avoid moisture.• The product is designed for outdoor use.• The product is not designed for medical monitoring, and requires a grown-up’s protective supervision on its use.• To avoid overheating of the product, do not expose the product to direct sunlight; do not install or use near a heat source such as heater, radiator, cooking devices (ex: electric stove or oven) and other warming devices (ex: audio amplifier, TV, etc.).• Make sure to keep ventilated while using the product.Avoid pillar or furniture that may block ventilation, when installing the product.• Make sure to use the power adaptor provided. If used with unidentified adaptor, it may damage the product. The power adaptor must be used with regular household electric supply.• Avoid sharp, pointed objects around the adaptor’s cable, not to damage the cable.• Be warned and never hold the cable’s stripped part when connecting / disconnecting the adaptor to/from the wall outlet.• To avoid entangled cable lines, avoid using cable extension for adaptor’s power cord.• The product’s servicing is allowed only to authorized Samsung Techwin’s service personnel.• When using the product for children’s care, be careful to keep the product out of children’s reach.• The product partially contains component which might cause respiration difficulty. Accessories and small parts of the product should be stored keeping out of children’s reach.• The product is not designed to replace responsibility of human supervision on children.• The product is not equipped with device of immediate notification to adult with accidental/sudden children‘s move; it requires periodic checks and human supervision.• This appliance and its antenna must not be collocated or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 cm must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. Contents GETTING STARTEDFeatures ……………………………………………………… 4What’s Included ……………………………………………… 5Part names and functions …………………………………… 6INSTALLATION & NETWORK CONNECTIONInstallation …………………………………………………… 8Network Connection and Settings …………………………… 10MONITORINGRegistration …………………………………………………… 12Live Video …………………………………………………… 17Setup ………………………………………………………… 20Event Alarm ………………………………………………… 27Playback ……………………………………………………… 27Information …………………………………………………… 28APPENDIXSpecifications ………………………………………………… 30Troubleshooting ……………………………………………… 33
4 · EnglishFeatures 4What’s Included 5Part names and functions 6Power Supply 7Network connection 701GETTING STARTED• Easy to install - Simply visit the home page (www.samsungsmartcam.com) and download and install the program without a separate installer program.• Remote monitoring - Whenever and wherever if you are in the Internet enabled environment, remote monitoring is ready for you. - PC, laptop or smart phone can be used for monitoring.• Real-time alarm - When a motion and sound are detected, your smartphone will generate real time alarms.• Saving in SD card - When an event occurs, the user can save the video in their SD card.• Two-way Audio - With the built-in speakers and microphone, you can make Two-way communications.However, it is available only with the smart phone. (Not applicable to the PC or laptop computer.)• IR LED - At low illumination levels, you can use an IR LED for monitoring purposes.Features
501Getting StartedWhat’s IncludedCheck for components when opening the product package.99Body & Bracket Camera Power AdaptorNetwork Cable Quick Start Guide Warranty CardGPL Lisence Tapping screw n `Please save the packaging. You will need the serial number later to register the camera.
6 · EnglishPart names and functions995(6(75(6(7Audio OutputConnect to the speaker.Audio Input Connect to the Mic.Micro card insertion holeCamera connector Connect the camera via the RJ-12 cable. Reset button Resets the camera settings to the default. Press and hold for about 10 seconds to reboot the system.Wi-Fi Direct button Create a Wi-Fi connection for your camera and smart phone.Camera lensPower / Network status LEDLuminance Sensor Detects light levels where the camera is placed. Night vision mode changes according to detection result.Network portUsed for wireless connection.Power connection terminalConnect to the power adaptor.Built-in IR LEDs for night visionAdjustment angle hinge
701Getting StartedPower SupplyPlug-in the camera power adapter to the wall outlet and connect the camera as shown. n `Make sure to use the provided power adaptor. If you use an adaptor other than the power supply adaptor provided in our package, the product may not operate properly. `It will take about 1min for the camera to boot-up completely. `When the camera has finished turning on, the LED lamp turns red and starts blinking.Network connection Connect the provided network cable to the camera’s network terminal.For further details on network configuration, refer to “Network Connection and Settings”. (Page 10)LED status LED indicator shows operational status with colors.Refer to table below for detailed meaning of the LED indicator.Color StatusRed Booting upRed Blinking Booting completed / Establishing network connectionBlue Blinking Connecting to the network.Blue Local connection establishedGreen Connection to server completed / Normal operationYellow WiFi Direct is operating. Magenta Updating firmware99
8 · EnglishInstallation 8Precautions 8Wall Mounting with Screws 9Adjusting the Angle 10Network Connection and Settings 10Precautions 10Connecting via network cable 11Wi-Fi connection setting 1102INSTALLATION & NETWORK CONNECTIONPrecautions1. Install the camera in a place where the Wi-Fi signal can be reached and without interference.2. Keep it away from humidity such as around the humidifier.3. Keep it away from direct sunlight, strong light or dust; install it in a place with clear view.4. Do not install it in a place where there are a lot of obstacles. 5. Keep the lens clean at all times.Wipe off the dust with a soft cloth.Installation
902Installation & Network ConnectionAssembling1. Match the home of the main unit and the bracket. 2. Please engage the bracket body and return to the [CLOSE] direction using a flathead screwdriver 2. `Turn to [OPEN] direction to remove the body and bracket.Installing the camera3. Choose the location where you want to install the camera. 4. Use the provided mounting screws to attach the camera to a wall or ceiling.Connecting the camera to the bodyConnect the [CAM] on the side of the main terminal and the camera cable.To adjust the camera angleAdjust the camera’s shooting angle as appropriate.99
10 · EnglishPrecautions• The wireless network access may fail, depending on the communications environment.• For details about the network settings and password, contact your network administrator or service provider.• For a specific Internet service requiring user authentication, you may not access the service. If this is the case, contact the service provider.• Do not access the unauthorized network.• The farther the distance from the Wireless Access Point, the longer time the network connection may take.• If you fail to access the selected wireless network, try a different Wireless Access Point to make access.• For more information about the router or the wireless connection, refer to the documentation of the router or contact the router manufacturer.• If the camera is connected to a multiple-Wireless Access Point network environment, some video packets may be lost, depending on the network traffic load.• According to the network policy (blocking UDP) of the service provider, the video transmission can be limited to 7 minutes.For more details, refer to the descriptions on page 19, <Relay Mode>.• In addition to the above two situations, you may encounter a network delay or interruption due to the network conditions.• Some hubs can have compatibility issues.Network Connection and SettingsConnecting via network cableIf you do not have a Wireless Access Point, you must connect the camera using LAN cable directly to your home router.1. When you apply the power, the power status LED is lit red, and it will change to red blinking when the booting is completed.2. Connect the network cable to the camera and to the home router as shown below. 3. The status LED will become steady blue once the camera is connected to the router. (may take up to 30sec).If the status LED (blue) is not lit, repeat steps 2 through the end and check it again.4. The status LED will became steady green once the camera is connected to server. n `It is recommended to set the router to DHCP(Dynamic Host Configuration Protocol) server. If you want to use static IP address, please refer to <Wired Network> on page 21. `If the router’s UPnP is not set, then you might be connected in relay mode.The settings may differ depending on the connected Broadband Router model.For more information, refer to the user manual of the applicable router.Internet Service<Modem><Hub>OR
1102Installation & Network ConnectionWi-Fi connection settingIf you want to connect a camera to Wi-Fi, first connect the network cable and try to make a connection to the Wi-Fi network.1. When you apply the power, the power status LED is lit red, and it will change to red blinking when the booting is completed.2. Use the network cable (LAN cable) to connect the LAN port of the unit to the LAN port of the Wireless Access Point.3. Register and select the camera according to guide of 03. Monitoring.4. Set your wireless network environment using the guideline <Wireless Network> on page 22. n `If you want to connect your camera to Wi-Fi, you need a hub that supports wireless networking. `Using the camera's Wi-Fi Direct function, you can easily make a Wi-Fi connection from your mobile phone. `When the wireless network settings are completed, remove the LAN cable. `If you fail to connect to the Internet service, contact the service provider for details.Internet Service<Modem><Wireless Access Point>
12 · EnglishRegistration 12Web browser requirements 12Starting SmartCam 12Live Video 17Monitoring options 18Setup 20Basic Info 20Network 21Time 23Alarm & Notification 24Alarm Schedule 25SD card 26Event Alarm 27Playback 27Information 28My Account 28Support 2903MONITORINGOnce you register the product with the site, you can monitor the camera video on the PC or laptop computer.Web browser requirementsWindows MacWindows XP, 7 supported- Internet Explorer 9 or higher(The 64-bit is not supported.)- Firefox- ChromeMac OSX 10.7 Lion or higher is supported- Safari- Firefox- ChromeStarting SmartCam1. From your PC, launch your web browser.2. Go to http://www.samsungsmartcam.com.3. Select preferred language.4. Click <Sign up> or <Starting SmartCam>. Registration
1303Monitoring ❖Plug in installation You need to install your plug in to automatically search for cameras connected to the network and view the video in your camera. n `If you login or click <Starting SmartCam> in a PC where the plug in is not installed, the installation message window will pop up. `When you install the plug in, the web browser will be terminated and you need to launch it again.1) Click <Download Plug-in>, run the setup file.For Windows2) Click <Next>.3) Click <Install> to begin the installation.4) Installation has completed.
14 · EnglishFor Mac2) Click <Continue>.3) Click <Install>.4) Enter MAC PC password and click <Install Software>.5) Installation has completed.
1503Monitoring6. According to the network connection and setting, click <Next> when the camera LED turns into green.7. Select the serial number of the camera to be added from the camera search list.If the camera is not found, enter the serial number manually.8. Click <Next>. n `Serial number can be found the label on the side of the packaging or on the rear of the product. `The computer and the camera has to be on the same network router to auto detect the cameras.5. Enter the requested information, and click <Sign Up>.• ID : Using alphabetical characters and numbers, make a combination using 8 to 14 letters. • Password : To strengthen security, create a password with a combination of special characters, numerals and English letters. J `Length and other restrictions of password. - A combination of English letters/numerals/special characters: 8 digits or more - A combination of English letters/numerals: 10 digits or more - The password must not be identical to your ID. - No simple repetitive pattern must be used.e.g., 1212abab,azxsazxs - You cannot use 3 or more consecutive letters.e.g., 1234, abcd - You cannot use 4 or more consecutive qwerty keyboard letters.e.g., asdf, 7890 - You cannot use any letter 3 consecutive times.e.g., !!!!, 1111, aaaa • Confirm Password : Please enter the password again for confirmation.• Name : Enter the user name.• E-mail : Please make sure you enter correct email address as you will have to use the email address to receive temporary ID/password when you lost your user ID or password.
16 · English9. Create <Camera Name> and <Camera password>.10. Click <Next>. n `The camera password is used to block the unauthorized access to your camera. `Create camera password using alphanumeric characters between 1 to 8 without any space.11. After adding the camera, click <Yes> in the wireless network setup pop-up window.12. Select your Wireless Network from the list.13. Enter the password of your Wireless Network and click <Next>. n `If your Wireless Network is hidden, select <Other Wi-Fi Networks (not listed)>. `Select <Display password> to display the password.14. Click <OK>.
1703Monitoring1. Select a camera from the camera list at the upper left hand of the screen. n `The gray icon indicates the camera is inactive so you cannot monitor it right now.2. Enter the camera password and click <OK>. n `Check on <Remember> to access your camera without entering the password next time. `If you want to change the Camera password, please refer to <Basic Info> on page 20.3. Live video will be displayed on the screen.Live Video15. Unplug the network cable from the camera and the router.16. Click <Finish> if the <Finish> button is activated.17. Once the camera is successfully registered, you can check the camera in the camera list.
18 · EnglishMonitoring optionsItem DescriptionDefault Camera Set the default camera to monitor in the camera list.bDelete Camera Delete the registered camera.cCancel remembering camera password Cancel remembering the camera password.Night VisionIf Night Vision is set <ON>, it will automatically switch to black and white mode in the dark condition and then the IR lamp will automatically operate.If Night Vision is set <OFF>, it does not switch to night vision mode and it will operate in color mode.Item DescriptionMotion zone setting It detects motion within the range set by a user.Flip You can flip over the video image.Manual recordingA user can directly save videos in their SD card. `If there is an ongoing event now or overwrite to SD card is not checked, and there is storage space of 10% remaining, you cannot perform manual recording. `If you move the page or turn off the browser without turning off the manual recording button, it will be saved for a max of 30 seconds and manual recording will be finished.Network SpeedSet the network speed (low/mid/high). `If the bandwidth provided by your internet service provider is smaller than the recommended value, then the video might get fuzzy or temporary disconnections or delays in the live video may be caused.Capture Image Live video is saved as one image.SoundWhen enabled, you can hear what’s happening around the camera. `Some internet service providers do not support audio outputs in relay mode.Full screenThe video is displayed on the full screen. `The system supports Internet Explorer only. `If you double-click the screen, the full screen mode is terminated. Brightness You can adjust the brightness of the screen image.mHide/unhide detailed menu Click on the [ ] icon to unhide or hide detailed setting menu.nAudioAdjust the volume of the built-in microphone and speaker of the camera as appropriate.If you set the mic to zero, you will hear no live sounds or audio events. NO recording will be done in the SD card.Note that the Two-way audio transfer function is available only with the smart phone application.mnb c
1903Monitoring ❖Network SpeedProfile Name Resolution Frame rate Recommended bandwidthLow Speed Network VGA 20 fps 0.7MbpsMid Speed Network HD(720P) 15 fps 1MbpsHigh Speed Network Full HD(1080P) 20 fps 2.8Mbps n `What is relay mode?If the network condition is unstable, the camera cannot make a normal connection (P2P), so it will set up a connection in relay mode. In this case, you will see the video for the first seven minutes only. `Relay mode is added feature where the video from the camera is transmitted to Samsung server then retransmitted to the user's computer. `If you have trouble connection to the camera, visit "http://www.samsungsmartcam.com", go to support page, and refer to “Troubleshooting” on it. `It is recommended to use one browser at one time. `If simultaneous accesses are made to the high speed network, video quality may be low. `The Night Vision video produces a different visibility according to the distance between camera and subject. ❖Motion detection area setting1) Click the < > icon.2) Drag it to the screen to set the detection area.3) Click on <OK>. If you want to delete the set area, click on <Delete All>. n `The <Motion Detection> function needs to be activated in order to use the motion zone function.
20 · EnglishItem DescriptionSerial number You can confirm the serial number.bCamera passwordClick the <Modify>, you can change the Camera password.Enter the current camera password, and type a new Camera password.cCamera Name Click the <Modify>, you can change the camera name.Firmware Version You can check the current version and the latest version of your camera S/W.Status LED You can turn on/off the LED in your camera.Flickerless You can reduce the occurrence of screen shaking due to the frequency mismatches with the neighboring lighting. n `If you change the camera password, you will be logged out and return to the camera password input page. `Keep the camera password in a safe place as it is used for viewing the live screen of the camera or for changing the display settings.Setup Basic Infobc
2103Monitoring ❖Firmware updateIf the currently used S/W is not of the latest version, update it.If you are using the latest version, then the firmware will not be activated.1) Click <Firmware>.2) Click the < > icon to update the firmware.3) When the firmware update is finished, the camera will reboot. n `If you want to update the firmware, it is recommended to use a wired network connection. `If the power goes off during updates, it may not operate properly. `The duration of the firmware update depends on the size of the firmware file and the network connection speed.Network Item DescriptionDynamic IP Address If you select <Dynamic IP Address>, the IP address will be obtained automatically.bStatic IP Address You must manually provide the information of: IP address, subnet mask, gateway, DNS server address.<Wired Network>b
22 · English n `If any of the manual settings is wrong, the network settings will not be applied. `If you have both cable and wireless network connections simultaneously, the cable network connection is prioritized. `If you switch from the current wireless connection to the cable connection, the network will switch to cable connection accordingly. `For more information about the router or the wireless connection, refer to the documentation of the router or contact the router manufacturer.Item DescriptionWireless On/Wireless OffYou can select to activate or deactivate the wireless network connection.bAP (Access Point) list You will see a list of APs (Access Point) available. Select a desired one from the list of APs (Access Point).cAP (Access Point) passwordIf you select a secured AP (Access Point), you must enter the password before you can access the network.For the password, contact your network administrator.Hidden SSID If your SSID is hidden, select the type of security you have. Enter the name of the SSID and the password. n `If you select a non-secured AP (Access Point), you just can access the network without providing a specific password. `If you entered a wrong password, you cannot access the network whatsoever. `When the wireless network settings are completed, remove the LAN cable. If you do not remove the LAN cable, the wireless network will not be available.<Wireless Network>bc
2303MonitoringTimeItem DescriptionTime Confirm the camera's time. bTime Zone Select your region.cDisplay Time Select the time format displayed in time setting.Automatic Time It sets camera's time automatically. Daylight Saving Time Check this option if you live in a country or region where DST(Daylight Saving Time) is applied.Time to show Live screen displays the time.cb n `The time will synchronize with the NTP(Network Time Protocol) server automatically. `For this, Internet connection is required. `You need to set the timezone correctly to obtain the exact time setting. `The time displayed without Internet connection may not be accurate.
24 · EnglishAlarm & NotificationCamera has ability to send event notifications when motion or audio is detected.Item DescriptionAlarm notificationYou can set motion or audio alerts. Sensitivity level can also be set. The higher the sensitivity, the more accurate motion and audio events can be detected. `When an event occurs, if you want to send alerts to Gmail, first log into your google account. n `In the following case, it may fail to derive the proper results for basic events and motion detection.- The object color or brightness is similar to the background.- Multiple movements continue occurring at random due to a scene change or other reasons.- A fixed object continues moving in the same position.- An object hides other objects behind.- Two or more objects overlap or one object divides in multiple portions.- A moving object comes close to the camera.<Gmail> NotificationThe event alarm is sent through Gmail.1. Select the Google. 2. Enter your Gmail address and password.3. Click <Save>.4. Select <Use> of “Send alarms”.5. Enter your email address to receive the notification e-mail and click <Add>.Now, the receiver full email address will be shown in the List Box. If you want to register more than one email address, you can just repeat the same procedure. n `If your Google email ID/password are saved, only check “Send alarms”. `If the email address for the recipient entered is incorrect, event alerts will not be sent. `Even if you entered a correct google account ID, if the ID/password confirmation pop up window appears, click on <Go to the google page.> and check the google account.<Receiver email address>
2503MonitoringPush alarm Notification The push alarm is provided through the web viewer and mobile app in which the camera is registered.• Push alert list shows the list of IDs of users who registered cameras.When an alarm occurs, the web site will send push alerts to each smart phone.Alarm ScheduleAlarms will only operate for the times selected by the user.Item DescriptionOnly Scheduled Time Alarm function will only operate for the time/day designated by the user.bAlways Alarm function always operates.b
26 · EnglishSD cardWhen an event occurs, it is saved in an SD card.Item DescriptionUse the SD card If you set motion/audio, video will be automatically saved in your SD card.bContinuous RecordingSaves the video without being interrupted by events that may occur.cOverwriteIf the SD card capacity is insufficient, it will start overwriting the oldest data. `When there is storage capacity of 10% remaining, the top notification window will show an alarm.SD Card Status Check the remaining capacity of your SD card and delete all the data.cb n `Set to <Off> before removing the SD card. Otherwise, the SD card may be damaged. `For this camera, you are recommended to use the following memory cards provided from the following makers.Micro SD memory card : SanDisk, TranscendRecommended Capacity : 4GB ~ 32GB `SD card of max 32GB is supported and a FAT32 file system is supported. `You are recommended to use the SD card after formatting.
2703MonitoringEvent Alarm You can check the event alarm that occurred.Item DescriptionDelete by dates Delete all the event alarms on the date.bDelete All Delete all the event alarms for thirty days.cDisplay Events Displays the number of events occurred in the 30 day list.Arrange by types Arrange the event list by event types.PlaybackYou can play the video recorded in your SD card.Item DescriptionType Set the event type to search for during the search period.bDate Set the search date for the data saved in your SD card.cPlay/pause Play and pause video.Search Perform event searches.Refresh Renew the events displayed in timeline.Timeline Use the timeline to play the video in the desired time.bcbc
28 · EnglishInformation My Account n `If you want to change the member information, click on <Account>. Select the item (password, or email address) and enter your information.
2903MonitoringSupportYou can download the Samsung SmartCam mobile app and user guide.
30 · EnglishSpecifications 30Specifications 30Product Appearance 32Troubleshooting 3304APPENDIXItem DescriptionOS LinuxResolution 1920x1080, 1280x720, 640x480Max. Framerate 1080p@20fpsVideo Compression Format H.264, MJPEGStreaming Capability Multiple Streaming (Up to 5 Profiles)Angular Field of View (D/V/H) 128°/ 62°/ 111°Low Light Performance 0.3Lux(Color), 0Lux(Black/White)WDR N/ADay & Night True D/N FilterNight vision IR-LED, 15MDigital Zoom 4XFlip / Mirror SupportMotion Detection SupportSpecifi cationsSpecifications
3104AppendixItem DescriptionAudio Detection SupportAudio I/O N/AAudio Compression Format G.711, G726Audio Communication 2-Way Audio (Optional Microphone & Speaker), Half DuplexMemory Slot microSD (FAT32), Up to 32GBRecording & Playback Event recording, Manual recording, Continuous recording, Remote playbackEthernet RJ-45 (10/100BASE-T)Wireless Wi-Fi 802.11 b/g/n (2.4G Single-band)WiFi Direct Support (Push button)Security SSL (AES 256bit)Max. User Access 5 users at Unicast ModeOperating Temperature / Humidity Camera : -10°C ~ 50°C, Body : 0°C ~ 40°C / Less than 90% RHIngress Protection IP66 (Camera part), Indoor (Body)Input Voltage / Current 9V DC / 1APower Consumption Max. 9WIndication 1 LED (Power, Status, Link)Item DescriptionColor WhiteDimension (WxHxD)Camera (Included bracket) : Φ54 x H102mm, Body (Except Mounts) W83.2 × H111 × D27.3mmWeight 568g
32 · EnglishProduct Appearance83.290.2 59.427.3 Φ54102116.6111
3304AppendixIf you encounter a problem with your system, see the table below to solve the problem as quickly and easily as possible. Please follow the instruction below:TroubleshootingProblem ActionI forgot my user ID/password. - Move to “Log-in page  Forgot your ID/Password?”, and enter the registered e-mail address to which we will send you the user ID and/or a new password.It can be spammed out depending on the policy of the email server.After logged in, it is advisable to change the temporary password provided.Camera is not connected to the wireless hub. - If the camera's wireless internet indication LED goes off too often, then it means that the camera installation location is not optimal for the wireless internet environment, so in this case, locate the camera close to the wireless hub and try to connect again. - Check the password for the wireless hub and try again.After logged in, I failed to register the camera. - Check that the serial number entered matches the label on the back of the camera. - Enter the correct password for the camera registered again and try to register the camera again. - Check the camera LED to see if it is green. If not, then check the network connection. - If you are still unable to register the camera after this, then reset the camera to factory settings and begin again.(If you want to reset to factory settings, press and hold the initialize button on the back for 10 sec. Once initialized to factory settings, the camera will be restarted.)Problem ActionThe video from the camera is temporarily lost. - The video from the camera can be delayed according to a network delay. Please check if the camera is installed in a place of proper wireless Internet communications.No sound is output from the video. - Click the Voice icon in the video playback page, or check if the voice is turned On in your smart phone app. - Some internet service providers do not support audio outputs in relay mode.I forgot my Camera password. - You must create a new camera password. - Press the initialization button on the back of the product for more than 10 seconds to reset to factory settings. - After factory initialization, when you access the camera, you can reset the password for the camera.I want to change my password and/or email address. - After logging in, click on the <Account>. Select the item (password, or email address) and enter your information.Camera will be connected in a relay mode. - Check the UPnP setting of the router. - Using a network upload speed of 500Kbps or higher is recommended. - Depending on the policy of your service provider, you can access in relay mode.
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)(Applicable in the European Union and other European countries with separate collection systems)This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly products, and indicates that the product satisfies the EU RoHS Directive.
SALES NETWORKSAMSUNG TECHWIN CO., LTD.Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, KoreaTEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745SAMSUNG TECHWIN AMERICA Inc.100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Toll Free : 1-877-349-3149www.samsungsv.comSAMSUNG TECHWIN EUROPE LTD.Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey, UNITED KINGDOM KT16 OPSTEL : +44-1932-45-5300 FAX : +44-1932-45-5325

Navigation menu