Hanwha Techwin URM-SK010 RFID READER MODULE User Manual URM SK010 User s Guide

Samsung Techwin Co Ltd RFID READER MODULE URM SK010 User s Guide

User manual

URM-SK010User’s Manual FCC ID : NLMURM-SK010 Samsung Techwin
3. Specifications 3-1. General Information 1) Frequency Range: 902.75Mhz ~ 927.25Mhz 2) Output Impedance: 50ohm 3) Transmission Type: A1D 4) Number of Channels: 50Channels 5) Communication Type: Short Signal 6) Voltage: DC 4.2V 7) Environment: -10°- +50°, 95% 8) Dimensions: 40mm(W) x 70mm(H) x 8.5mm(D) 9) Weight: 23g 3-2. Electrical Characteristics 3-2-1. Transmitter 1) Output power: Max 1W 2) Frequency Bandwidth: Up to 200KHz 3) Frequency Error Allowance: +/-20x10-6 4) Output Power Deviation: Up to +/-1dB 5) Output Power Control Range: 16dBm ~ 30dBm 6) Stationary Wave Ratio: Max 1:1.3 7) Maximum Stay Time in Single Channel: Less than 400ms8) Maximum Continual Transmission Time: Total Number of Channels x Less than 400ms 9) Minimum Rest Time after Continual Transmission: 100ms or higher 10) Number of RF Output Port: 1 port 12) RF Output Connector: MMCX 13) LED indicators: Power, Operating, Fail LED 14) Reading Distance Range: 0.05m ~ 3m 15) Writing Distance Range: 0.05m ~ 1m
3-2-2. Power Main power is DC 4.2V. It is designed not to pass 1.0W even if voltage is higher than rated voltage. 4. Operation Instructions 4-1. PreparationA. Read the handling instructions before use. B. Check whether main power is connected. C. Check whether RFID Reader is operating (power LED must be on.) 4-2. Names of Parts XYZ[\ڜۋۋۀڼۍڼۉھۀٻڼۉڿٻڡېۉھۏۄۊۉٻ

Navigation menu