Haoku Technology Development BE3 BE3 Stereo Wireless Sports Headset User Manual

Haoku technology development (SHENZHEN) co.,Ltd BE3 Stereo Wireless Sports Headset

User manual

stereo wireless earphoneInstruction Manual We are very glad that you purchased mini wireless earphone! We hope it brings you fun and enjoy!Safety MattersFrequently asked questions Technical specifications※You should pay attention to the following matters when you use this product: ※Charging and battery: ※Pairing mode: ※Turn off: ※Wireless pairing steps: ※Starting up: ※Disconnect the wireless connection between headset and mobile phone: please use any of the following methods.※Hanging up calls: ※Re-dialing calls:※Rejecting calls: ※Answering calls: ※Reconnection of the paired headset to your mobile phone: ※Music playing/pausing: ※Volume adjustment and selection of song: ※Technical specifications:※Explanatory drawing of headset※Headset package contents: Headset overviewIn order to use this product correctly and safely, please read this manual in detail before using, and save it properly. 1.Please control properly the volume and time of use this headset. 2.Do not use headset in the potential risk environment, to ensure safety. 3.Do not use this headset to listen a music, dial or answer calls during driving, to avoid risk of distraction.4.Please keep headset out of reach of children to avoid the risk caused by the improper use by children. 5.Avoid the water to flow into the headset at the time of washing, it can be reason of damage of headset or headset sound quality. 6.Continuously increase of volume should be avoided, because you cannot hear the sound all around. If the tinnitus occurred or the sound volume is increased too high, please adjust sound to suitable volume. 7.If you feel obvious discomfort, excitement or other adverse reaction when using this headset, please immediately stop using it. 8.Do not place or use this headset at the environment where the temperature is lower than -15℃（5 F) or higher t han 55℃（131 F). Otherwise, the service life of the headset or battery will be shorten. 2.Insert USB charging cable into the headset charging interface, and insert another end of USB charging cable into USB charger or other charging unit. At this point, the headset is charging. The red light of the headset is permanently lighted while charging. 3.The time of the full charge of headset is about two hours. After fully charged, the red light of the headset is turned off. Warning1.You must use matched charging cable to charge headset. If you use unmatched charging cable, it is able to damage the headset; DC voltage must be 5V and the electric current must be more than 100mA (5V/100mA). 2.This headset has built-in, non-removable, rechargeable battery. Do not try to take out the battery from headset, to avoid damaging of the headset. ƔLong press multifunction key until the blue light is lighted and the headset beeps.ƔLong press multifunction key until red and blue lights flash alternately and the headset will beeps. ƔLong press multifunction key until red light is turned off after it is lighted, and headset will beep. 1.Please keep the distance between wireless headset and mobile phone (or other connection units) within one meter, as close as possible. 2.Turn on the headset and enter into the pair mode, red and blue lights flash alternately at this moment. 3.Turn on the wireless search function in mobile phone or unit required for other connection; the mobile phone will display “HOCO ES5”. Please firstly turn off headset before charging. 4.Select “HOCO ES5” (the “0000” needs to be inputted as pair password in the mobile phone), the wireless headset will automatically connect with the mobile phone, and blue light flashes. Note: the pair time of the wireless headset is at least 120 seconds. If the light is turned off, it means that the wireless pairing mode has bee n stopp ed. If yo u have no t paire d successfully, please repeat step 1 to 4 for pairing again. ƔTurn off the mobile phone wireless function. ƔPress headset multifunction key for a long time until red light is turn off, and the headset will automatically turn off. ƔMove headset to the location where it is away from 20 meters of mobile phone (about 60 feet) or further. ƔWhen you hear warning sound from headset during call, continuously press multifunction key for two times, the call will be rejected; or use your mobile phone to reject call. ƔContinuously press multifunction key for two times in the standby mode, this will automatically re-dial last telephone number. ƔClick headset multifunction key during call; or use the “hang up” key in your mobile phone to hang up call. ƔWhen you hear warning sound from headset during call, click multifunction key to answer call; or use your mobile phone to answer call. 1.Please keep the distance between wireless headset and mobile phone (or other connection units) within one meter, as close as possible.2.Turn on headset, and then the headset will enter into re-connection mode; at this moment, the blue light flash. 3.Open the wireless search function in the mobile phone or devices required for other connections at the same time, and the wireless headset will automatically re-connect with the last connected mobile phone. ƔWhen playing music, click sound volume (+)/(-) to adjust the sound volume. Long press sound volume (+)/(-) to select song. 1.Why HOCO ES5 cannot pair with mobile phone? A: please check whether headset is in the pairing or reconnecting mode and check whether the mobile phone wireless search function has been opened. Check wireless menu in the mobile phone and delete/cancel headset, and re-connect the headset in accordance with the user manual. 2.Why HOCO ES5 headset does not turn on? A: please check the power level of the headset. 3.Can the battery of HOCO ES5 headset be replaced? A: No, this headset has unremovable lithium-polymer battery. 4.Can HOCO ES5 headset be used during driving? A: the communication headset may be used during driving. But, it is not recommended to use headset during driving. 5.Can HOCO ES5 headset disconnect with mobile phone within 10 meters? A: because the wireless is a wireless technology, thus the wireless technology is very sensitive to objects between the headset and connected unit; please check whether there are metals or other objects which may impact on the connection within the connection scope. 6.After the headset connected to a computer or mobile phone,why there is no sound?A: please check whether the computer output sound track has been set as wireless voice frequency device and whether the computer wireless technology supports A2DP protocol. Please check computer/mobile phone sound volume.7.When wireless headset connected with the phone, can it be used for control phone’s applications?A: software functions of the apps in the different devices are vary, so some application functions cannot be supported by headset. ƔClick multifunction key to play or pause music. ƔWireless version: Wireless 4.0ƔWireless chip: CSR8645ƔFrequency: 2.4GHzƔWorking range: up to 10 meters (free space) ƔStand-by time: more than 240 hoursƔPlaying music time: more than 6 hoursƔTalk time: more than 5.5 hoursƔCharging time: about 2 hoursƔSupport protocol: A2DP, AVRCP, HSP, HFPƔFrequency response: 20Hz-20kHzƔES5 wireless sports headset: One.ƔUser manual: One.ƔCharging cable: One.ƔStorage box: One.ƔHeadset cap: Two pairs.ƔHeadset support: One pair.5678Lon g press Vo lume "+ " and "-" at same time, then it wil l switc h.※Switch the notification tone:MF buttonMicrophoneVol(+) Next TrackVol(-) Previous TrackUSB Port((( !"#$%%%& %'  ( $%( '%( %( )*+%)   ,to o%This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.

Navigation menu