Haoku Technology Development BE3 BE3 Stereo Wireless Sports Headset User Manual
Haoku technology development (SHENZHEN) co.,Ltd BE3 Stereo Wireless Sports Headset
User manual
( Safety Matters Headset overview In order to use this product correctly and safely, please read this manual in detail before using, and save it properly. âťExplanatory drawing of headset âťYou should pay attention to the following matters when you use this product: ( 1.Please control properly the volume and time of use this headset. 2.Do not use headset in the potential risk environment, to ensure safety. 3.Do not use this headset to listen a music, dial or answer calls during driving, to avoid risk of distraction. 4.Please keep headset out of reach of children to avoid the risk caused by the improper use by children. 5.Avoid the water to flow into the headset at the time of washing, it can be reason of damage of headset or headset sound quality. 6.Continuously increase of volume should be avoided, because you cannot hear the sound all around. If the tinnitus occurred or the sound volume is increased too high, please adjust sound to suitable volume. 7.If you feel obvious discomfor t, excitement or other adverse reaction when using this headset, please immediately stop using it. 8.Do not place or use this headset at the environment where the temperature is lower than -15âďź5 F) or higher than 55âďź131 F). Otherwise, the service life of the headset or battery will be shor ten. stereo wireless earphone 2.Inser t USB charging cable into the headset charging inter face, and inser t another end of USB charging cable into USB charger or other charging unit. At this point, the headset is charging. The red light of the headset is permanently lighted while charging. 3.The time of the full charge of headset is about two hours. After fully charged, the red light of the headset is turned off. Vol(+) Next Track MF button Vol(-) Previous Track USB Port Microphone We are very glad that you purchased mini wireless earphone! We hope it brings you fun and enjoy! âťPairing mode: ĆLong press multifunction key until red and blue lights flash alternately and the headset will beeps. âťHeadset package contents: âťTurn off: ĆLong press multifunction key until red light is turned off after it is lighted, and headset will beep. âťWireless pairing steps: âťCharging and battery: Please firstly turn off headset before charging. 4.Select âHOCO ES5â (the â0000â needs to be inputted as pair password in the mobile phone), the wireless headset will automatically connect with the mobile phone, and blue light flashes. Note: the pair time of the wireless headset is at least 120 seconds. If the light is turned off, it means that the wireless pairing mode has been stopped. If you have not paired successfully, please repeat step 1 to 4 for pairing again. âťDisconnect the wireless connection between headset and mobile phone: please use any of the following methods. ĆTurn off the mobile phone wireless function. ĆPress headset multifunction key for a long time until red light is turn off, and the headset will automatically turn off. ĆMove headset to the location where it is away from 20 meters of mobile phone (about 60 feet) or fur ther. ĆWhen you hear warning sound from headset during call, continuously press multifunction key for two times, the call will be rejected; or use your mobile phone to reject call. âťHanging up calls: ĆClick headset multifunction key during call; or use the âhang upâ key in your mobile phone to hang up call. âťRe-dialing calls: ĆContinuously press multifunction key for two times in the standby mode, this will automatically re-dial last telephone number. âťMusic playing/pausing: ĆClick multifunction key to play or pause music. âťReconnection of the paired headset to your mobile phone: âťVolume adjustment and selection of song: 1.Please keep the distance between wireless headset and mobile phone (or other connection units) within one meter, as close as possible. 2.Turn on headset, and then the headset will enter into re-connection mode; at this moment, the blue light flash. 3.Open the wireless search function in the mobile phone or devices required for other connections at the same time, and the wireless headset will automatically re-connect with the last connected mobile phone. âťSwitch the notification tone: ĆWhen playing music, click sound volume (+)/(-) to adjust the sound volume. Long press sound volume (+)/(-) to select song. âťStarting up: ĆLong press multifunction key until the blue light is lighted and the headset beeps. ĆES5 wireless spor ts headset: One. ĆUser manual: One. ĆCharging cable: One. ĆStorage box: One. ĆHeadset cap: Two pairs. ĆHeadset suppor t: One pair. Instruction Manual Warning 1.You must use matched charging cable to charge headset. If you use unmatched charging cable, it is able to damage the headset; DC voltage must be 5V and the electric current must be more than 100mA (5V/100mA). 2.This headset has built-in, non-removable, rechargeable battery. Do not try to take out the battery from headset, to avoid damaging of the headset. A: please check the power level of the headset. 3.Can the battery of HOCO ES5 headset be replaced? A: No, this headset has unremovable lithium-polymer battery. 4.Can HOCO ES5 headset be used during driving? A: the communication headset may be used during driving. But, it is not recommended to use headset during driving. 5.Can HOCO ES5 headset disconnect with mobile phone within 10 meters? A: because the wireless is a wireless technology, thus the wireless technology is very sensitive to objects between the headset and connected unit; please check whether there are metals or other objects which may impact on the connection within the connection scope. 6.After the headset connected to a computer or mobile phone,why there is no sound? A: please check whether the computer output sound track has been set as wireless voice frequency device and whether the computer wireless technology suppor ts A2DP protocol. Please check computer/mobile phone sound volume. 7.When wireless headset connected with the phone, can it be used for control phoneâs applications? A: software functions of the apps in the different devices are vary, so some application functions cannot be suppor ted by headset. 1.Please keep the distance between wireless headset and mobile phone (or other connection units) within one meter, as close as possible. 2.Turn on the headset and enter into the pair mode, red and blue lights flash alternately at this moment. 3.Turn on the wireless search function in mobile phone or unit required for other connection; the mobile phone will display âHOCO ES5â. ĆPlaying music time: more than 6 hours ĆTalk time: more than 5.5 hours ĆCharging time: about 2 hours ĆSuppor t protocol: A2DP, AVRCP, HSP, HFP ĆFrequency response: 20Hz-20kHz Long press Volume "+" and "-" at same time, then it will switch. Frequently asked questions Technical specifications âťTechnical specifications: âťAnswering calls: ĆWhen you hear warning sound from headset during call, click multifunction key to answer call; or use your mobile phone to answer call. âťRejecting calls: 1.Why HOCO ES5 cannot pair with mobile phone? A: please check whether headset is in the pairing or reconnecting mode and check whether the mobile phone wireless search function has been opened. Check wireless menu in the mobile phone and delete/cancel headset, and re-connect the headset in accordance with the user manual. 2.Why HOCO ES5 headset does not turn on? ĆWireless version: Wireless 4.0 ĆWireless chip: CSR8645 ĆFrequency: 2.4GHz ĆWorking range: up to 10 meters (free space) ĆStand-by time: more than 240 hours !" #$ % % % & %' ( $ % ( ' ( % ( ) % *+ % ) % , to o This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Create Date : 2017:02:05 16:05:29+08:00 Creator : Adobe Illustrator CC 2014 (Windows) Modify Date : 2017:02:05 16:05:29+08:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Creator Tool : Adobe Illustrator CC 2014 (Windows) Metadata Date : 2017:02:05 16:04:36+08:00 Thumbnail Width : 256 Thumbnail Height : 92 Thumbnail Format : JPEG Thumbnail Image : (Binary data 10277 bytes, use -b option to extract) Producer : Acrobat Distiller 11.0 (Windows) Format : application/pdf Title : ES5-说明书中英文版 20161121(1) Rendition Class : proof:pdf Document ID : xmp.did:8a5b7276-6786-2148-8e9d-0d0deb39e83a Instance ID : uuid:4a6dba2c-4f94-4497-a71d-9f76144488c8 Original Document ID : xmp.did:a010552f-a302-a74e-b0c5-937ca13da32d Derived From Instance ID : uuid:303e3284-c744-458e-bb19-db0d2af5b8f3 Derived From Document ID : xmp.did:c17a5ebe-e538-b546-a783-9d621a8ce9d7 Derived From Original Document ID: xmp.did:a010552f-a302-a74e-b0c5-937ca13da32d Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:a010552f-a302-a74e-b0c5-937ca13da32d, xmp.iid:8a5b7276-6786-2148-8e9d-0d0deb39e83a History When : 2016:09:18 11:33:47+08:00, 2016:11:24 09:30:43+08:00 History Software Agent : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2014 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : C:\Users\Administrator\Desktop\MIC.jpg, C:\Users\Administrator\Desktop\MIC.jpg, C:\Users\Administrator\Desktop\X2 P5色.jpg, C:\Users\Administrator\Desktop\X2 P5色.jpg Ingredients File Path : C:\Users\Administrator\Desktop\MIC.jpg, C:\Users\Administrator\Desktop\MIC.jpg, C:\Users\Administrator\Desktop\X2 P5色.jpg, C:\Users\Administrator\Desktop\X2 P5色.jpg N Pages : 1 Has Visible Transparency : False Has Visible Overprint : False Max Page Size W : 620.476174 Max Page Size H : 229.129167 Max Page Size Unit : Millimeters Font Name : ArialMT, Arial-BoldMT, NexaBold, SchadowBT-Roman, Swiss721BT-Roman, Swiss721BT-RomanCondensed, Tahoma, AdobeSongStd-Light, MicrosoftYaHei-Bold Font Family : Arial, Arial, Nexa Bold, Schadow BT, Swis721 BT, Swis721 Cn BT, Tahoma, Adobe 宋体 Std, 微软雅黑 Font Face : Regular, Bold, Regular, Roman, Roman, Roman, Regular, L, Bold Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 5.10, Version 5.08, Version 1.000, Version 1.01 emb4-OT, Version 1.01 emb4-OT, Version 1.01 emb4-OT, Version 5.10, Version 5.017;PS 5.002;hotconv 1.0.67;makeotf.lib2.5.33168, Version 6.02 Font Composite : False, False, False, False, False, False, False, False, False Font File Name : arial.ttf, arialbd.ttf, Nexa Bold.otf, tt1106m_.ttf, tt0003m_.ttf, tt0009m_.ttf, TAHOMA.TTF, AdobeSongStd-Light.otf, msyhbd.ttf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 默认色板组 Swatch Groups Group Type : 0 Page Count : 1EXIF Metadata provided by EXIF.tools