Harbor Freight 0 1 In Mechanical Micrometer Product Manual

: Harbor-Freight Harbor-Freight-0-1-In-Mechanical-Micrometer-Product-Manual-723927 harbor-freight-0-1-in-mechanical-micrometer-product-manual-723927 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 4

Page 2 For technical questions, please call 1-800-444-3353. Item 895

Specifications

Measuring Range 0.0001" to 1”

Important Safety Information

Use Precautions

1. This tool is not a toy. Do not allow

children to play with or near this item.

2. Use as intended only.

3. Inspect before every use; do not use

if parts are loose or damaged.

4. Maintain tool with care. Properly

maintained tools are more accurate.

5. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

Functions

Anvil Thimble

Lock

Display

Ratchet

Stop

Thimble

Figure A

Page 3For technical questions, please call 1-800-444-3353.Item 895

Use Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this document including all text under subheadings therein

before use of this product.

Note: This is a delicate instrument.

The Micrometer should be handled

carefully. Dropping this product could

damage it, and may affect accuracy.

1. Use a clean, lint-free cloth to clean

the Anvil faces of the Micrometer

and the object being measured.

2. Open the Micrometer, by rotating the

Thimble counterclockwise, until it is

wider than the object to be measured.

3. Place the Anvil around the object,

then turn the Thimble clockwise until

the Anvil just touches the object.

4. Turn the Ratchet Stop clockwise

to close the Anvil on the object

being measured until it clicks.

Note: To avoid damage to either the

Micrometer or the workpiece, only use

the Ratchet Stop to close the Anvil

of the Micrometer on the object.

5. Turn the Thimble Lock clockwise to lock

the measurement and carefully withdraw

the Micrometer from the object.

6. This Micrometer measures items in

thousandths of an Inch. View the

Display underneath the Thimble

Lock to see the results.

7. To calculate ten thousandths of an

inch, refer to the number line on the

Thimble. Add the number indicated onto

the end of the number in the Display.

Maintenance

Procedures not specifically explained in this manual

must be performed only by a qualified technician.

BEFORE EACH USE, inspect the general

condition of the tool. Check for:

• loose screws,

• misalignment or binding of moving parts,

• cracked or broken parts, and

• any other condition that may

affect its safe operation.

1. Use a clean, lint-free cloth to

clean the Micrometer.

2. Store tool safely. When not in use, store

this product in its storage case out of the

reach of children, in a safe, dry location.

Record Serial Number Here:

Note: If product has no serial number, record

month and year of purchase instead.

Note: Some parts are listed and shown

for illustration purposes only, and are not

available individually as replacement parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND

ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER

THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR

WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE

ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR

EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD

BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE

BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR

HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR

ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free from

defects in materials and workmanship for the period of 90 days from the date of purchase.

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence

or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages

arising from the use of our product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us

with transportation charges prepaid. Proof of purchase date and an explanation

of the complaint must accompany the merchandise. If our inspection verifies the

defect, we will either repair or replace the product at our election or we may elect

to refund the purchase price if we cannot readily and quickly provide you with a

replacement. We will return repaired products at our expense, but if we determine

there is no defect, or that the defect resulted from causes not within the scope

of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353