Harbor Freight 0 37 Cubic Ft Electronic Digital Safe Product Manual

Harbor-Freight-93575-Owner-S-Manual harbor-freight-93575-owner-s-manual

: Harbor-Freight Harbor-Freight-0-37-Cubic-Ft-Electronic-Digital-Safe-Product-Manual-724084 harbor-freight-0-37-cubic-ft-electronic-digital-safe-product-manual-724084 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

Specifications
Safe Dimensions
Safe Wall Thickness
Batteries

8" H x 7-7/8" W x 12-3/16" L
14 Gauge
4 - AA (sold separately)

IMPORTANT SAFETY INFORMATION
Installation Precautions
1. Verify that installation surface has no hidden
utility lines before drilling or driving screws.
2. Wear ANSI-approved safety
goggles during installation.
3. Mount securely before use.
4. Install only according to these instructions.
Improper installation can create hazards.

6. Keep bystanders out of the area during installation.
7. Do not install when tired or when under the
influence of alcohol, drugs or medication.
8. At least two people are needed to move this product.
9. Place the Safe on correct surface.
Only use this Safe on a stable, level, clean and dry
surface that is capable of sustaining the load.

5. Keep installation area clean and well lit.

Use Precautions
1. Keep closed and locked whenever unattended.
RISK OF CHILD ENTRAPMENT AND
SUFFOCATION.
Check inside before closing.
Do not allow children to play with or near safe.
Keep keys and codes away from children.
2. Keep clear of door when closing.
3. Position batteries in proper polarity and
do not install batteries of different types,
charge levels, or capacities together.
4. Use as intended only.
5. Inspect before every use; do not use
if parts are loose or damaged.
6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

Page 2

7. Do not store Keys inside of the Safe.
Place the emergency keys in a location
outside of the safe making sure they are
in a secure location that you can find.
8. Warning: The brass components of this
product contain lead, a chemical known
to the State of California to cause birth
defects (or other reproductive harm).
(California Health & Safety code § 25249.5, et seq.)
9. The warnings, cautions, and instructions discussed
in this instruction manual cannot cover all possible
conditions and situations that may occur. It must
be understood by the operator that common sense
and caution are factors which cannot be built into
this product, but must be supplied by the operator.
10. The Safe is not fireproof.
NOTE: Harbor Freight Tools is not responsible
for the loss of any property stored within this safe
due to theft, fire, or any other circumstance.

For technical questions, please call 1-800-444-3353.

Item 93575

Installation
1. Choose where you want to mount the Safe.
The supplied mounting Bolts are for mounting
in concrete. To mount to another surface,
use appropriate 3/8" bolts (not included).

4. Open the Safe by using the included key.
Install 4 “AA” batteries aligned with the
markings in the battery compartment. Set
up a PIN code, as explained below.

2. If you are mounting on a shelf, make
sure the shelf is weight rated to safely
support the Safe and its contents.

5. Situate the Safe where you want it and draw
marks through the four mounting holes onto
the mounting surface(s). Some mounting
configurations may use only two holes on
the Safe - for better security, use all four.

3. If you are mounting on a wall or floor, make
sure no wires, pipes, or cables are hidden
behind the drill path for mounting the screws.

6. Move the Safe and predrill the holes for
the 3/8" Bolts. Fit the Safe over the drilled
mounting holes and secure it with the Bolts.

Operation

Programming your personal PIN
1. Open the Safe, as explained above. Make
sure the batteries are properly installed.
2. Press the Red Button on the inside of the door
near the hinges. The unit will beep twice and
the yellow light will illuminate. See Figure A.
3. You only have thirty seconds to enter your PIN.
Select your 3 to 8 digit PIN and input it on the
Keypad. A beep will sound for each key pressed.
4. Press the letter “B” to confirm your PIN. After
you press “B”, the unit will beep twice to confirm
you’ve successfully inputted your PIN.

Red Button

Figure A

General Operation
1. To open the Safe, input your PIN, press the
letter “B”, and turn the Knob clockwise.
2. The unit will beep twice and the green light will
illuminate, indicating that the Safe is now open.

3. After entering your PIN, you have 5 seconds
to turn the Knob and open the Safe. After
5 seconds, the mechanism re-locks.
4. If the mechanism re-locks, repeat Step 1. If incorrect
numbers are entered and the letter “B” is entered
three times, the Safe will lock up for 20 seconds.

Using the Override Key
If you forget or lose your PIN, you can gain access
to the Safe by using your Override Key. The
Key fits in the keyhole shown in Figure B.
1. Remove the small panel covering the keyhole.
2. Insert your Key and turn it
counterclockwise to open the Safe.

Knob

Keypad

Override Key

Figure B
Item 93575

For technical questions, please call 1-800-444-3353.

Page 3

Maintenance
1. Keep the Safe and the Keypad clean
and clear of dirt and debris. Wipe the
unit clean with a lint free cloth.
2. Red and green lights will illuminate on the
control panel when the batteries are low. To
replace the batteries, open the Safe and
remove the Battery Cover inside the door.

3. Remove used batteries. Dispose of
them properly or recycle them.
4. Insert 3 new “AA” batteries. Position batteries
in proper polarity and do not install batteries
of different types, charge levels, or capacities
together. Replace the Battery Cover.

Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.

Note: Some parts are listed and shown
for illustration purposes only, and are not
available individually as replacement parts.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2013:08:21 10:09:17-07:00
Creator                         : Adobe InDesign CS5 (7.0)
Modify Date                     : 2013:08:21 10:09:42-07:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Instance ID                     : uuid:26dedd37-7a98-a843-8c0f-96e35099f541
Document ID                     : adobe:docid:indd:fcc6f354-9225-11dc-a8bc-ebebaec57a33
Original Document ID            : adobe:docid:indd:fcc6f354-9225-11dc-a8bc-ebebaec57a33
Rendition Class                 : proof:pdf
History Action                  : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:E0F9A563152068118083F109A7BE69D0, xmp.iid:E1F9A563152068118083F109A7BE69D0, xmp.iid:E9F9A563152068118083F109A7BE69D0, xmp.iid:810384B7152068118083F109A7BE69D0, xmp.iid:776CDDBE152068118083F109A7BE69D0, xmp.iid:786CDDBE152068118083F109A7BE69D0, xmp.iid:7F6CDDBE152068118083F109A7BE69D0, xmp.iid:806CDDBE152068118083F109A7BE69D0, xmp.iid:91BDF7EE0E2068118083CDA4C7B67301, xmp.iid:D584FB1C1E2068118083CDA4C7B67301, xmp.iid:DD84FB1C1E2068118083CDA4C7B67301, xmp.iid:CF45E8461E2068118083CDA4C7B67301, xmp.iid:DF4192FA1E2068118083CDA4C7B67301, xmp.iid:E64192FA1E2068118083CDA4C7B67301, xmp.iid:52E02ED61F2068118083CDA4C7B67301, xmp.iid:7E7B2D820B2068118083D8520BBEF528, xmp.iid:C580C120162068118083CC6A1D996397, xmp.iid:487FB8ED252068118083CC6A1D996397, xmp.iid:FC7F1174072068118083F3BC50E8AE28, xmp.iid:27FE2886252068118083F3BC50E8AE28, xmp.iid:AC576FFF0C2068118083FBCCE45225FB, xmp.iid:0953B11A1320681180839DF0AC879A9C, xmp.iid:0D53B11A1320681180839DF0AC879A9C, xmp.iid:1153B11A1320681180839DF0AC879A9C, xmp.iid:9C8D85E81C20681180839DF0AC879A9C, xmp.iid:08801174072068118083F881E96A8CD0
History When                    : 2013:05:17 15:10:33-07:00, 2013:05:17 15:10:33-07:00, 2013:05:17 15:12:38-07:00, 2013:05:17 15:12:53-07:00, 2013:05:17 15:13:06-07:00, 2013:05:17 15:13:06-07:00, 2013:05:17 15:13:35-07:00, 2013:05:17 15:13:35-07:00, 2013:05:22 09:09:42-07:00, 2013:05:22 10:58:22-07:00, 2013:05:22 10:58:37-07:00, 2013:05:22 10:59:32-07:00, 2013:05:22 11:04:34-07:00, 2013:05:22 11:10:33-07:00, 2013:05:22 11:10:42-07:00, 2013:08:12 15:21:26-07:00, 2013:08:13 11:34:27-07:00, 2013:08:13 11:51:52-07:00, 2013:08:13 12:38:40-07:00, 2013:08:13 16:13:55-07:00, 2013:08:14 08:48:41-07:00, 2013:08:15 10:01:50-07:00, 2013:08:15 11:07:35-07:00, 2013:08:15 11:09:39-07:00, 2013:08:15 11:12-07:00, 2013:08:21 10:07:24-07:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata
Metadata Date                   : 2013:08:21 10:09:42-07:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 9269 bytes, use -b option to extract), (Binary data 9492 bytes, use -b option to extract)
Doc Change Count                : 4098
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False
Page Count                      : 4

EXIF Metadata provided by EXIF.tools