Harbor Freight 1000 Gram Digital Scale Product Manual
Manual for the 60332 1000 Gram Digital Scale 60332 1000 Gram Digital Scale
2015-05-27
: Harbor-Freight Harbor-Freight-1000-Gram-Digital-Scale-Product-Manual-723900 harbor-freight-1000-gram-digital-scale-product-manual-723900 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 4
Page 2 For technical questions, please call 1-800-444-3353. ITEM 60332
Specications
Max. Capacity 1000 grams
Measurement Units grams, ounces, grains, pennyweights,
troy ounces, and carats
Accuracy ±0.1 gram
Automatic Shut-off 60 seconds
Power Source 2 “AAA” Batteries (included)
Important Safety Information
1. Position batteries in proper polarity and
do not install batteries of different types,
charge levels, or capacities together.
2. This Scale is not a toy. Do not allow
children to play with or near this item.
3. Weight readings are for household use
only. Do not use for commerce or trade.
4. Inspect before every use;
do not use if parts are loose
or damaged.
5. Place Scale on at, stable, level surface.
6. Sensitive instrument.
Do not drop, bump, or shake Scale.
7. Do not exceed Scale’s capacity.
Display
Figure A: Startup Screen
hold - Indicates that the reading is stable.
tare - Indicates that tare weight is factored out. Press TARE with empty container on
Scale to set the Scale to ignore container weight and display content weight only.
zero - Indicates that the Scale has nothing on its platform, and is at its neutral position.
pcs - Indicates that scale is in piece count (custom weight unit) mode.
See PCS mode for explanation.
g/oz/ct/ozt/gn/dwt - Indicates weight unit. Press MODE to cycle through weight units.
Page 3For technical questions, please call 1-800-444-3353.ITEM 60332
Operation
NOTE: Do not use Scale for
commerce or trade.
1. Place the Scale on a at, hard surface.
2. Remove the cover.
3. Press the ON/OFF button once.
The Scale will display everything
while starting up -
see Figure A: Startup Screen.
When the Scale shows
zero 0.0g it is ready for use.
Figure B: Scale ready
Note: If battery is low, Lo (Low Battery)
will be shown. See Figure C.
Figure C: Low Battery
To Replace Batteries:
a. Open battery cover,
remove old batteries and
dispose of them properly.
b. Install 2 new “AAA“ batteries
according to proper polarity and
close cover. Do not install batteries
of different types, charge levels,
or capacities together.
4. Press MODE to cycle through
weight units. Current weight unit is
displayed on the right of the display.
5. TARE mode:
To set the Scale to ignore the weight of
a container and weigh only contents,
place empty container on Scale
and press TARE.
tare will be displayed and the Scale will
ignore the container’s weight.
Remove container and press TARE
again to cancel tare mode.
6. PCS mode:
This mode is used to count small
objects. To get an accurate count,
it is essential that the objects all weigh
the same. To set up PCS mode:
a. Place 25, 50, 75, or 100 quantity
of the objects on the scale.
b. Press and hold PCS for 3 seconds.
c. Press MODE to match the quantity
of objects on the scale. Available
numbers are 25, 50, 75, and 100.
d. Press PCS to conrm the quantity.
pcs will be displayed.
7. Gently place item to be weighed on
the center of the platform. The weight
(or quantity of objects for pcs mode)
will appear on the display.
Note: If too much weight is placed
on the platform, the display will read
O,Ld (Overload) as shown below.
Figure D: Overload
8. To turn off Scale,
press the ON/OFF button.
Note: The Scale will automatically turn
off 60 seconds after item is weighed.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Calibration
CAUTION: An exact 200g weight is needed for calibration (not included).
Improper calibration will make the Scale inaccurate.
1. Make sure nothing is on the platform and it
is clean and dry. Place the Scale on a level,
at, hard, stable surface. Turn on Scale.
2. Press and hold MODE for longer than
3 seconds, until CAL is displayed.
Press MODE again to calibrate 0.0 reading.
3. The display will ash 200.0g. Place an exact
200g weight on the center of the platform.
If calibration is complete, the Scale will show
PASS and it can be used normally.
If not, have the Scale serviced
by a qualied technician.
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection veries the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specic legal rights and you may also have other rights which vary from state to state.
