Harbor Freight 1000 Lb Capacity Motorcycle Swingarm Rear Stand Product Manual

2015-05-27

: Harbor-Freight Harbor-Freight-1000-Lb-Capacity-Motorcycle-Swingarm-Rear-Stand-Product-Manual-723597 harbor-freight-1000-lb-capacity-motorcycle-swingarm-rear-stand-product-manual-723597 harbor-freight pdf

Open the PDF directly: View PDF PDF.
Page Count: 5

INSTRUCTIONS AND PRECAUTIONS
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
SAVE THESE INSTRUCTIONS. READ ALL
PRECAUTIONS AND INSTRUCTIONS.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
MOTORCYCLE
SWINGARM
REAR LIFT
AND STAND
65620
SKU 65620 For technical questions, please call 1-800-444-3353. Page 2
SPECIFICATIONS
Weight Capacity 1000 lbs.
Width Capacity
From 10-1/4" to 13-3/8"
(outside width of swing
arm)
Rubber Coated Casters 3" Diameter
UNPACKING
When unpacking, make sure that the item
is intact and undamaged. If any parts are missing
or broken, please call Harbor Freight Tools at the
number shown on the cover of this document as
soon as possible.
IMPORTANT SAFETY
INFORMATION
Assembly Precautions
Assemble only according to these instruc-1.
tions. Improper assembly can create haz-
ards.
Wear ANSI-approved safety goggles and 2.
heavy-duty work gloves during assembly.
Keep assembly area clean and well lit.3.
Keep bystanders out of the area during as-4.
sembly.
Do not assemble when tired or when under 5.
the inuence of drugs, alcohol or medication.
Use Precautions
This product is not a toy. Do not allow chil-1.
dren to play with or near this item.
Use for intended purpose(s) only.2.
Inspect before use; do not use if parts are 3.
loose or damaged.
Maintain product labels and nameplates. 4.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
ASSEMBLY INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.
Assembly
Refer to the assembly drawing for these 1.
instructions.
Locate two Axles (5).2.
Locate eight Flat Washers (8), four Casters 3.
(6), four Lock Nuts (4) and two Bushing (7).
Insert Axles (5) and into the axle brackets lo-4.
cated on the outside curved part of the Stand
Frame (1).
Slide a Flat Washer (8) over each end of the 5.
Axle (5) and up against the axle bracket.
Slide a Bushing (7) over the ends of the Axle 6.
(5) and up against the Flat Washers.
Slide two Casters (6) over each end of the 7.
Axle and over the Bushings (7).
Slide another Washer over each end of the 8.
axle and up against the side of the Caster.
Screw a Lock Nut (4) onto each end of the 9.
Axle locking the assembly together.
Repeat for the Caster assembly on the other 10.
side.
Slide each Paddle Style Adapter (2) into the 11.
square adapter bracket at the end of each
Bracket.
To lift the front of the motorcycle, Front Fork a.
Adapters (9) SKU 65621, are available.
Screw a Knob (3) into the threaded hole at 12.
the top of each square adapter bracket and
tighten.
These Knobs hold the Adapters at their a.
desired width positions.
Operation
Adjust the position of the Paddle Adapters (2) 1.
to match motorcycle’s dual swing arm width.
Loosen Knobs (3) holding Adapters (2). a.
Slide the Adapters outward.b.
Roll the Stand behind the motorcycle so that c.
the motorcycle is in the middle of the Stand
Frame.
Move Stand to where the Paddles are under d.
the swing arm.
Adjust Paddle Adapters (2) inward into posi-e.
tion.
Make sure the Paddles are snug up against f.
the swing arm and tighten Knobs (3).
SKU 65620 For technical questions, please call 1-800-444-3353. Page 3
If the motorcycle kick stand is the type that 2.
holds the motorcycle upright, use it.
If not, have an assistant hold the motorcycle a.
upright.
Lower the handle engaging the Paddle 3.
Adapters (2) with the swing arm.
With the Paddle Adapters securely support-4.
ing the swing arm, lower the Stand Frame (1)
to the ground.
Fig. 1
a. The handle resting on the ground acts as a
support base for the Stand. (See Fig. 1.)
CAUTION: Do not attempt to lift the motorcycle if
the Paddle Adapters are not fully engaged
with the swing arm.
To lower the motorcycle, have an assistant 5.
support the motorcycle by its handlebars.
Raise the Stand Frame (1) handle from the a.
ground carefully, lowering the motorcycle.
Remove the Paddle Adapters from the swing 6.
arm. Roll the Stand away from the motor-
cycle.
With the assistant still supporting the motor-7.
cycle, re-engage the kick stand.
To lift the front of the motorcycle, replace the 8.
Paddle Adapters with the optional Front Fork
Adapters (9).
Follow the instructions that come with the a.
Front Fork Adapters.
Store the Stand in a clean dry area away 9.
from children.
PLEASE READ THE FOLLOWING
CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS
PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY.
NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY
KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED
TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT
HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF
THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN
BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT
BY THE BUYER. THE BUYER ASSUMES ALL RISK AND
LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,
OR ARISING OUT OF HIS OR HER INSTALLATION OF
REPLACEMENT PARTS THERETO.
PARTS LIST & ASSEMBLY
DIAGRAM
Part Description Qty.
1 Stand Frame 1
2 Paddle Adapter 1 Set
3 Knob 2
4 Lock Nut 4
5 Axle 2
6 Caster 4
7 Bushing 4
8 Flat Washer 8
9 Front Fork Adapter (Optional)* 1 Set
* Call Customer Service for availability -
Ask for SKU number 65621
SKU 65620 For technical questions, please call 1-800-444-3353. Page 4
ASSEMBLY DIAGRAM
Axle Bracket
Adapter Bracket
Record Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note: Some parts are listed and shown for illustration purposes only, and are not available individually as
replacement parts.
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and dura-
bility standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We
shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special
or consequential damages arising from the use of our product. Some states do not allow the exclusion or
limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IM-
PLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation
charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the mer-
chandise. If our inspection veries the defect, we will either repair or replace the product at our election
or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replace-
ment. We will return repaired products at our expense, but if we determine there is no defect, or that the
defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning
the product.
This warranty gives you specic legal rights and you may also have other rights which vary from
state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353

Navigation menu