Harbor Freight 100 Hook Key Box Product Manual
Manual for the 95318 100 Hook Key Box 95318 100 Hook Key Box
2015-05-27
: Harbor-Freight Harbor-Freight-100-Hook-Key-Box-Product-Manual-723942 harbor-freight-100-hook-key-box-product-manual-723942 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
Specifications Construction 20-gauge sheet steel 100 hook key box Model 95318 Instructions and precautions Dimensions 21-5/8” H x 14-3/4” W x 3-1/8” T Accessories Two brass locking keys Number identification sheet 100 Thermoplastic key tags Unpacking When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444-3353 as soon as possible. Important SAFETY Information Assembly Precautions 1. Mount only according to these instructions. Improper mounting can create hazards. 2. Wear ANSI-approved safety goggles and heavyduty work gloves during mounting. 3. Verify that installation surface has no hidden utility lines before drilling or driving screws. 4. Be careful of sharp corners during mounting. 5. Do not mount the Key Box when tired or when under the influence of drugs or medication. Use Precautions Visit our website at: http://www.harborfreight.com Save these instructions. Read all precautions and instructions. Copyright© 2006 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Revised Manual 10a 1. This product is not a toy. Do not allow children to play with keys or the Key Box. 2. Use as intended only. 3. Keep locking keys stored in secure location away from children. 4. The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code § 25249.5, et seq.) 5. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Mounting Instructions Key Hook Strips Read the entire Important Safety Information section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Set the Key Box up on the location where you wish to mount the Key Box. Use a pencil to mark the location of four mounting holes. Set the Key Box aside. 2. NOTE: It is best to mount on a wood surface. If not available use the included dry wall anchors when mounting. 3. Drill four holes of the appropriate size (where previously marked with a pencil) into the wall. 4. CAUTION! Before drilling holes, verify that there are no hidden electrical wires or cords under mounting area. 5. Line up the four mounting holes on the back of the Key Box with the holes drilled into the wall. Use the included mounting screws to fasten Key Box to wall. 6. Continue to tighten the screws until the Key Box is fastened securely in place. Instructions 1. 2. Hook the multi-colored strips with key hooks in the spacers along the inside of the cabinet and along the door. Be sure they are attached level and evenly spaced. Come up with an organizing system that best suits your purpose for the Key Box. For example, the multi-colored strips could indicate which floor an auto is located on or which area the car is parked. The corresponding Key Tags in the poly bag can also work as a location or identification device. A numbered identification sheet is installed inside the Key Box to also help with organization. See photo, above. 3. For security or for keys left unattended, use the provided keys to lock the Key Box. 4. To label the key tags, remove the key ring from the hole in the tag. Slide the plastic cover out through the slot in the tag. Mark the label and replace the plastic slip cover and key ring. 5. Keep Key Box clean and organized. Wipe off dust using a damp cloth. Then dry. SKU 95318 Key Tags Identification Sheet Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: There are no replacement parts available for this Key Box PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this document as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/ or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto. For technical questions, please call 1-800-444-3353. Page 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42 Instance ID : uuid:580214d5-26d7-48e4-a015-32f2cc40c140 Document ID : adobe:docid:indd:c2656c4b-d54c-11de-8579-951f984043bc Rendition Class : proof:pdf Derived From Instance ID : 06b1c737-90ca-11de-b2fe-fc31fc7337ca Derived From Document ID : adobe:docid:indd:06b1c736-90ca-11de-b2fe-fc31fc7337ca Manifest Link Form : ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches Manifest Reference Instance ID : uuid:D4208D8A88E6DE11A607D08A39954445, uuid:D4208D8A88E6DE11A607D08A39954445 Manifest Reference Document ID : uuid:D0208D8A88E6DE11A607D08A39954445, uuid:D0208D8A88E6DE11A607D08A39954445 Create Date : 2010:01:19 09:37:56-08:00 Modify Date : 2010:01:19 09:38-08:00 Metadata Date : 2010:01:19 09:38-08:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 11719 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools