Harbor Freight 1 2 In 7 8 Tubing Bender Product Manual
2015-05-27
: Harbor-Freight Harbor-Freight-1-2-In -7-8-In-2-In-1-Tubing-Bender-Product-Manual-724069 harbor-freight-1-2-in---7-8-in-2-in-1-tubing-bender-product-manual-724069 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 3
| Download | |
| Open PDF In Browser | View PDF |
2-IN-1 PIPE BENDER 94623 ASSEMBLY AND OPERATION Visit our website at: http://www.harborfreight.com Save these instructions. and instructions. Read all precautions Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Specifications Product Applications Designed for bending copper and aluminum pipe. Pipe Size Capacity 1/2” to 7/8” Diameter tubing. Maximum Bend Up to 180° Construction Cast iron and steel tube. Steel rollers. Aluminum hardware. Accessories Bending dies (Qty. 2) Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this document as soon as possible. Important SAFETY Information Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. Revised Manual 10k 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 3. Keep assembly area clean and well lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble when tired or when under the influence of drugs or medication. Use Precautions 1. This product is not a toy. Do not allow children to play with or near this item. 2. Use for intended purpose(s) only. 3. Inspect before use; do not use if product is damaged. 4. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 5. This tool is designed to bend soft metal pipe or tubing, such as copper or aluminum. Do not attempt to bend hard metal pipe, such as black iron pipe. You may damage the tool. 6. Do not attempt to bend brittle materials, such as glass or hard plastic. Those materials 7. may shatter and potentially cause injury. Always wear ANSI-approved safety impact eye goggles and heavy duty work gloves when using the Tube Bender. 3. Insert the tubing along the Handle (4). Move the Tube Holder (1) to allow the tube to slide under it, and position the Tube Holder (1) to hold the tube in place. (See Figure B.) As the pipe or tubing is being bent, there is a significant pinch hazard created. Keep hands, fingers, feet, and any item which may be injured or damaged away from the Tube Bender and hinge point areas of this tool when in operatoin. 4. While holding the tube along the Handle (4), pull down on the Handle with Grip (5). The tube will be formed along the Tubing Bender (2). Continue pulling until the desired bend has been achieved, from 0 to 180 degrees. (See Figure B.) 5. When completed, remove the bent tube from the tool. Assembly & OPERATION Instructions TUBE HOLDER (1) Read the entire Important Safety Information section at the beginning of this document including all text under subheadings therein before set up or use of this product. 2. HANDLE (4) Insert the Handle (4) through the Tube Holder (1). Screw the Handle into the threaded hole of the Tubing Bender (2) by turning clockwise until tight. (See Figure A.) TUBING BENDER (2) TUBING (NOT INCLUDED) Insert the Handle with Grip (5) into the Connecting Plate Assembly (3). (See Figure A.) HANDLE WITH GRIP (5) TUBE HOLDER (1) FIGURE A TUBING BENDER (2) Operation 1. Select the proper bending die (5/8” or 7/8”) to suit the diameter of tubing you wish to bend.(See Figure B.) 2. Rotate the Handle with Grip (5) around the Tubing Bender (2) until it is in a straight line with the other Handle (4). (See Figure B.) SKU 94623 CONNECTING PLATE ASSY. (3) 5/8” OR 7/8” BENDING DIE (6, 7) maintenance CONNECTING PLATE ASSY. (3) HANDLE (4) (PULL DOWN TO BEND TUBE) FIGURE B Assembly 1. HANDLE WITH GRIP (5) 1. Before each use, inspect the Pipe Bender for bent or damaged components. 2. Periodically, lubricate the hinge points of the tool with a medium weight oil. 3. Regularly wipe down and clean the tool to keep it in best condition. 4. When not in use, store the tool in a clean, dry, safe location out of reach of children and other unauthorized persons. PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this document as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. For technical questions, please call 1-800-444-3353 Page 2 In fact, the manufacturer and/or distributor Record Serial Number Here: expressly states that all repairs and parts Note: If product has no serial number, record month and year of replacements should be undertaken by certified purchase instead. and licensed technicians, and not by the buyer. Note: No parts are available individually as replacement parts. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto. PARTS LIST & ASSEMBLY DIAGRAM. Part # Qty. Part # 1 Tube Holder Description 1 5 Handle with Grip Description 1 2 Tubing Bender 1 6 5/8” Bending Die 1 3 Connecting Plate 1 7 7/8” Bending Die 1 4 Handle 1 3 Qty. 5 1 5/8” Bending Die (6) not shown. 7/8” Bending Die (7) not shown. 4 SKU 94623 2 For technical questions, please call 1-800-444-3353 Page 3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42 Instance ID : uuid:98778c90-d1e8-4265-bfe0-e0a81b0f4996 Document ID : adobe:docid:indd:9fdb76e9-19f5-11dd-8237-a7cc83a06603 Rendition Class : proof:pdf Derived From Instance ID : f16b7f2d-192b-11dd-a759-d05726f2d1d4 Derived From Document ID : adobe:docid:indd:4469247e-191e-11dd-9643-c2279101644d Manifest Link Form : DirectStream Manifest Placed X Resolution : 300.00 Manifest Placed Y Resolution : 300.00 Manifest Placed Resolution Unit : Inches Manifest Reference Instance ID : uuid:c4d40ab6-f85b-11d8-8519-c2203b035590 Manifest Reference Document ID : adobe:docid:photoshop:c4d40ab5-f85b-11d8-8519-c2203b035590 Create Date : 2010:11:16 09:15:08-08:00 Modify Date : 2010:11:16 09:15:24-08:00 Metadata Date : 2010:11:16 09:15:24-08:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 10996 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 3 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools