Harbor Freight 12 Ton Hydraulic Heavy Duty Bottle Jack Product Manual
Manual for the 69481 12 Ton Heavy Duty Low Profile Industrial Hydraulic Bottle Jack 69481 12 Ton Hydraulic Low Profile Heavy Duty Bottle Jack
Manual for the 69475 8 Ton Heavy Duty Hydraulic Bottle Jack 69475 8 Ton Hydraulic Heavy Duty Bottle Jack
Manual for the 69476 12 Ton Heavy Duty Industrial Hydraulic Bottle Jack 69476 12 ton Hydraulic Heavy Duty Bottle Jack
Manual for the 69478 20 Ton Heavy Duty Industrial Hydraulic Bottle Jack 69478 20 ton Hydraulic Heavy Duty Bottle Jack
Manual for the 69484 30 Ton Heavy Duty Industrial Hydraulic Bottle Jack 69484 30 Ton Hydraulic Heavy Duty Bottle Jack
2015-05-27
: Harbor-Freight Harbor-Freight-12-Ton-Hydraulic-Heavy-Duty-Bottle-Jack-Product-Manual-723480 harbor-freight-12-ton-hydraulic-heavy-duty-bottle-jack-product-manual-723480 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
Specifications 69472 4 Tons (8,000 lb.) Max. Height 15" 69475 8 Tons (16,000 lb.) 15-5/8" 8" 4-3/4" x 4-1/2" 10.5 lb. 69481 12 Tons (24,000 lb.) 12-3/4" 6-3/4" 5-3/8" x 5-1/4" 12.5 lb. 69476 12 Tons (24,000 lb.) 16-1/4" 8-1/4" 5-3/8" x 5-1/4" 14.2 lb. 69483 20 Tons (40,000 lb.) 14" 7-1/4" 6-1/2" x 6" 18.3 lb. 69478 20 Tons (40,000 lb.) 18-3/4" 9-1/2" 6-1/2" x 6" 21.6 lb. 69484 30 Tons (60,000 lb.) 18-1/2" 11-1/4" 7-1/4" x 5-3/4" 43 lb. ITEM Weight Capacity Min. Height 7-5/8" Base Dimensions 4-1/4" x 4" Weight 6.5 lb. All these jacks meet 2009 ANSI/ASME PALD standards. WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. IMPORTANT SAFETY INFORMATION Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in serious injury. Save all warnings and instructions for future reference. 1. Study, understand, and follow all instructions before operating this device. 2. Do not exceed rated capacity. 3. Use only on hard, level surfaces. 4. Lifting device only. Immediately after lifting, support the vehicle with appropriate means. 5. Do not adjust safety valve. REV 12k Page 2 For technical questions, please call 1-800-444-3353. Bottle Jacks 6. Wear ANSI-approved safety goggles and heavy-duty work gloves during use. 7. Keep clear of load while lifting and lowering. 8. Lower load slowly. 9. Do not use for aircraft purposes. 10. Apply parking brake and chock tires before lifting vehicle. 11. Lift vehicle only at manufacturerrecommended locations. 12. Inspect before every use; do not use if parts loose or damaged. 13. Keep your work area clean and well lit. Cluttered work areas invite accidents. 14. Keep bystanders, children, and visitors away while operating jack. Distractions can cause you to lose control. Protect others in the work area. 19. Maintain labels and nameplates on the Jack. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 20. Before use, read manufacturer’s instruction manual for the vehicle (or object) you will lift. 21. When lifting only one wheel, support the load immediately with one jack stand (not included) placed under the side of the vehicle being lifted. Align the saddle of the jack stand directly under the vehicle’s seam or recommended lifting point. 22. When lifting the entire front end or rear end of a vehicle, support the load immediately with two jack stands. Align the saddles of the jack stands directly under the vehicle’s frame or recommended lifting points. Also, adjust the jack stands to the same height. 15. Stay alert. Watch what you are doing, and 23. Do not work under the vehicle without properly supporting the use common sense when operating a jack. vehicle with jack stands. Do not use a jack while tired or under the influence of drugs, alcohol, or medication. 24. Avoid dangerous oncoming A moment of inattention while operating traffic. Use the Jack as far away jacks may result in serious personal injury. from the roadside as possible. 16. Store idle jacks out of reach of children 25. Industrial applications must and other untrained persons. Jacks are follow OSHA requirements. dangerous in the hands of untrained users. 26. Do not allow anyone in the vehicle while 17. Jack service must be performed only by using the Jack. Keep all bystanders a qualified repair personnel. Service or safe distance away from the vehicle. maintenance performed by unqualified 27. Do not support both ends of the personnel could result in a risk of injury. vehicle at the same time. 18. When servicing a jack, use only identical 28. Before lowering the Jack, remove all tools replacement parts - refer to attached, and equipment from under the vehicle. product-specific parts list and diagram. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of injury. 29. The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors, which cannot be built into this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS. Bottle Jacks For technical questions, please call 1-800-444-3353. Page 3 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Bleeding Saddle Oil Fill Hole Valve Release Screw Oil Filler Plug IMPORTANT! Before first use, check for proper hydraulic oil level in the Jack. Then thoroughly test the Jack for proper operation prior to its actual use. If the Jack appears not to be working properly, it may be necessary to bleed its hydraulic system of excess air. Page 4 1. Remove the Oil Filler Plug. Insert the slot on the lower portion of the handle over the Valve Release Screw. Turn the Handle counterclockwise to open the Valve Release Screw. 2. Insert the Handle into the Plunger/ Fulcrum Assembly. Apply pressure to the Saddle, and pump the Handle quickly several times. 3. Check the Oil Fill Hole and, if necessary, top off the Oil Fill Hole with hydraulic oil. 4. Replace the Oil Filler Plug. 5. Test the Jack several times for proper operation before attempting to lift a load. If, after purging, the Jack still does not appear to be working properly, do not use the Jack until it has been repaired by a qualified service technician. For technical questions, please call 1-800-444-3353. Bottle Jacks Lifting Elevating Screw (some models) manufacturer’s owner’s manual for location of seam lifting point when lifting only one wheel and frame lifting points when lifting the entire front or rear end of the vehicle.) Plunger/ Fulcrum 3. Note: The Jack should be positioned at 90° to the vehicle’s lifting point to ensure the Jack’s Saddle and vehicle lifting point are in alignment. If not, remove and reposition the Jack before lifting the vehicle. Handle WARNING! Set Jack on a flat, level, solid, ground surface. If using with vehicle, set safely away from oncoming traffic and turn off vehicle’s engine. Also place the vehicle’s transmission in “PARK” (if automatic) or in its lowest gear (if manual). Set the vehicle’s emergency brake. Then, block the wheels that are not being lifted. 1. 2. Insert the lower portion of the Handle into the Valve Release Screw, and turn the Handle counterclockwise to lower the Jack. Once the Jack is fully lowered, turn the Handle firmly clockwise to close the Valve Release Screw. Carefully position the Saddle of the Jack under the vehicle manufacturer’s recommended lifting point. If equipped, the Elevating Screw can be used to alter the height of the jack’s saddle; it is adjusted by turning it clockwise or counterclockwise. (See vehicle Bottle Jacks Pump the Handle until the top of the Jack’s Saddle has nearly reached the vehicle lifting point. 4. To lift the vehicle, pump the Handle of the Jack. Use smooth, full strokes for best results. 5. Once the vehicle is raised, slide a jack stand of appropriate capacity (not included) to the proper lifting point referred to in the vehicle owner’s manual. If using two jack stands, position them at the same point on each side of the vehicle. 6. Center the vehicle’s lifting point(s) on the saddle of the jack stand(s). Set up the jack stand(s) according to the manufacturer’s instructions, making sure that they lock securely into position. Note: If using two jack stands they must be at the same height. 7. Slowly turn the Handle counterclockwise to open the Valve Release Screw and lower the vehicle onto the saddle(s) of the jack stand(s). Then, turn the Upper/Lower Handle firmly clockwise to close the Valve Release Screw. For technical questions, please call 1-800-444-3353. Page 5 Lowering Plunger/ Fulcrum Handle (on Valve Release Screw) Page 6 1. Remove all tools, parts, etc. from under the vehicle. 2. Position the Saddle under the lifting point. Turn the Handle firmly clockwise to close the Valve Release Screw, and pump the Upper/Lower Handle to raise the vehicle slightly above the saddle(s) of the jack stands. Then, collapse and remove jack stand(s). 3. Slowly turn the Handle counterclockwise (never more than two full turns) to lower the vehicle onto the ground. 4. Lower the Jack completely. Then, store in a safe, dry location out of reach of children’s reach. For technical questions, please call 1-800-444-3353. Bottle Jacks Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication 1. Before each use, inspect the general condition of the Jack. Check for broken, cracked, or bent parts, loose or missing parts, and any condition that may affect the proper operation of the product. If a problem occurs, have the problem corrected before further use. Do not use damaged equipment. 2. Before each use, thoroughly test the Jack for proper operation prior to its actual use. If the Jack appears not to be working properly, follow Bleeding instructions on page 5. 3. Change the hydraulic oil at least once every three years: a. With the Jack fully lowered, remove the Oil Filler Plug on the side of the Housing. b. Tip the Jack to allow the old hydraulic oil to drain out of the Housing completely, and dispose of the old hydraulic oil in accordance with local regulations. c. With the Jack upright, completely fill the Housing with a high quality hydraulic oil (not included) until the oil just begins to run out of the Oil Fill Hole. d. Then, reinstall the Oil Filler Plug. 4. Clean with a clean cloth with a detergent or mild solvent. Then, store the Jack in a safe, dry location out of reach of children and other non-authorized people. Bottle Jacks For technical questions, please call 1-800-444-3353. Page 7 Troubleshooting TO PREVENT SERIOUS INJURY: Use caution when troubleshooting a malfunctioning jack. Stay well clear of the supported load. Completely resolve all problems before use. If the solutions presented in the Troubleshooting guide do not solve the problem, have a qualified technician inspect and repair the jack before use. After the jack is repaired: Test it carefully without a load by raising it and lowering it fully, checking for proper operation, BEFORE RETURNING THE JACK TO OPERATION. DO NOT USE A DAMAGED OR MALFUNCTIONING JACK! POSSIBLE SYMPTOMS Jack will not lift at its weight capacity Saddle lowers under load X X Pump stroke feels spongy Saddle will not lift all the way Handle moves up when jack is under load Oil leaking from filler plug PROBABLE SOLUTION (Make certain that the jack is not supporting a load while attempting a solution.) Check that Release Valve is closed fully. Valves may be blocked and may not close fully. To flush the valves: X X 1. Lower the Saddle and securely close the Release Valve. X 2. Manually lift the saddle several inches. 3. Open the release valve and force the saddle down as quickly as possible. X X Jack may be low on oil. Check the oil level and refill if needed. X Jack may require bleeding - see instructions on page 5. X Page 8 Unit may have too much hydraulic oil inside, check fluid level and adjust if needed. For technical questions, please call 1-800-444-3353. Bottle Jacks PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Bottle Jacks For technical questions, please call 1-800-444-3353. Page 9 –Parts Part 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Page 10 List Description Adjustable Saddle Saddle Socket Piston Rod Nut O-Ring (Nut) Seal Piston Bowl Washer O-Ring (Piston) Cylinder Reservoir Reservoir Seal Base Plate Washer Filter Screen Oil Fill Plug Release Valve Release Valve Seal Qty 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Part 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 Description Ball 6mm Ball Stopper Base Bolt Washer (Pump) Pump O-Ring (Plunger) Back Ring Plunger R-Pin Pin Short Pin Link Plate Handle Socket Handle Top Handle Bottom For technical questions, please call 1-800-444-3353. Qty 3 1 1 2 1 1 1 1 1 2 2 1 2 1 1 1 Bottle Jacks –Assembly ASSEMBLY Diagram DIAGRAM Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Bottle Jacks For technical questions, please call 1-800-444-3353. Page 11 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2012:11:28 12:29:16-08:00 Creator : Adobe InDesign CS5 (7.0) Modify Date : 2012:11:28 12:30:17-08:00 Has XFA : No Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:56:37 Instance ID : uuid:f4592656-4e68-3141-924a-6ac57d62a461 Document ID : xmp.did:9158C55E4B2068118A6DB1C161172CB5 Original Document ID : adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:C79D838E4A2068118A6DB1C161172CB5 Derived From Document ID : xmp.did:AFF736A8472068118A6DB1C161172CB5 Derived From Original Document ID: adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:7EA511693D20681180839C64BA4E4F1D, xmp.iid:7FA511693D20681180839C64BA4E4F1D, xmp.iid:FA7F1174072068118083938105DA3C8D, xmp.iid:FB7F1174072068118083938105DA3C8D, xmp.iid:FC7F1174072068118083938105DA3C8D, xmp.iid:FD7F1174072068118083938105DA3C8D, xmp.iid:FE7F1174072068118083938105DA3C8D, xmp.iid:FF7F1174072068118083938105DA3C8D, xmp.iid:00801174072068118083938105DA3C8D, xmp.iid:CC8D1DA6122068118083938105DA3C8D, xmp.iid:780470B31820681180839D99F3060A4F, xmp.iid:790470B31820681180839D99F3060A4F, xmp.iid:7A0470B31820681180839D99F3060A4F, xmp.iid:FA8CAC432720681180839D99F3060A4F, xmp.iid:FB8CAC432720681180839D99F3060A4F, xmp.iid:A253E29F3A2068118C14FB08BA0B5CAA, xmp.iid:1D6E37B72B2068118083C56F976E2725, xmp.iid:F08528A0212068118083DD13B10FA5BD, xmp.iid:F18528A0212068118083DD13B10FA5BD, xmp.iid:6FE2175B292068118083F162B62867F2, xmp.iid:70E2175B292068118083F162B62867F2, xmp.iid:FA2BEFDB252068118C14ED77B56EB80D, xmp.iid:2272872F1E2068118A6DD67F94C5BF3B, xmp.iid:2372872F1E2068118A6DD67F94C5BF3B, xmp.iid:2772872F1E2068118A6DD67F94C5BF3B, xmp.iid:9052AC86072068118083F542CBF19F50, xmp.iid:9152AC86072068118083F542CBF19F50, xmp.iid:BCAE4193112068118083B60CA66871E5, xmp.iid:9014E2F7202068118083B60CA66871E5, xmp.iid:9414E2F7202068118083B60CA66871E5, xmp.iid:84DA1043232068118083B60CA66871E5, xmp.iid:85DA1043232068118083B60CA66871E5, xmp.iid:86DA1043232068118083B60CA66871E5, xmp.iid:87DA1043232068118083B60CA66871E5, xmp.iid:88DA1043232068118083B60CA66871E5, xmp.iid:89DA1043232068118083B60CA66871E5, xmp.iid:8ADA1043232068118083B60CA66871E5, xmp.iid:8BDA1043232068118083B60CA66871E5, xmp.iid:8CDA1043232068118083B60CA66871E5, xmp.iid:8DDA1043232068118083B60CA66871E5, xmp.iid:8EDA1043232068118083B60CA66871E5, xmp.iid:567D7E36252068118083B60CA66871E5, xmp.iid:577D7E36252068118083B60CA66871E5, xmp.iid:01801174072068118C14AF7C4839B703, xmp.iid:38182200092068118C14A28B05CF85A2, xmp.iid:3F182200092068118C14A28B05CF85A2, xmp.iid:FD7F1174072068118083EBD0451BF6DE, xmp.iid:FE7F1174072068118083EBD0451BF6DE, xmp.iid:E96385E82B206811808387863ACCC31B, xmp.iid:26F95DC2222068118C1494274E5A86E7, xmp.iid:A91D11BF252068118C1494274E5A86E7, xmp.iid:34806C431C2068118C149261D8AF601F, xmp.iid:E0862B624F2068118C149261D8AF601F, xmp.iid:875B1A29172068118083B3AF141491B5, xmp.iid:FFBA78334A2068118083C3064E5CD25D, xmp.iid:7EE53C21082068118C148A62131A2E25, xmp.iid:7FE53C21082068118C148A62131A2E25, xmp.iid:08801174072068118C14C8C5EC87F841, xmp.iid:09801174072068118C14C8C5EC87F841, xmp.iid:7205E526102068118083DF298AABDDB6, xmp.iid:1F9290901D2068118C148AA619833E0B, xmp.iid:209290901D2068118C148AA619833E0B, xmp.iid:229290901D2068118C148AA619833E0B, xmp.iid:239290901D2068118C148AA619833E0B, xmp.iid:12DAE8931E2068118C148AA619833E0B, xmp.iid:FCAB9B6F1D2068118C14E1FE5B2D360F, xmp.iid:175652A2072068118083A844F748EADD, xmp.iid:3FD27516082068118083A844F748EADD, xmp.iid:5049F385402068118083C1C654EB7AB3, xmp.iid:2340CC1A422068118083C1C654EB7AB3, xmp.iid:2440CC1A422068118083C1C654EB7AB3, xmp.iid:BEC29235472068118083C1C654EB7AB3, xmp.iid:BFC29235472068118083C1C654EB7AB3, xmp.iid:C0C29235472068118083C1C654EB7AB3, xmp.iid:C1C29235472068118083C1C654EB7AB3, xmp.iid:02801174072068118C14C23B8C005612, xmp.iid:03801174072068118C14C23B8C005612, xmp.iid:09801174072068118C14C23B8C005612, xmp.iid:9B38AA42102068118C14C23B8C005612, xmp.iid:9C38AA42102068118C14C23B8C005612, xmp.iid:B67C9C48102068118C14C23B8C005612, xmp.iid:9052AF8C162068118C14C23B8C005612, xmp.iid:9752AF8C162068118C14C23B8C005612, xmp.iid:9852AF8C162068118C14C23B8C005612, xmp.iid:538E0D093B2068118C14C23B8C005612, xmp.iid:A8F736A8472068118A6DB1C161172CB5, xmp.iid:AFF736A8472068118A6DB1C161172CB5, xmp.iid:3F02B3BF472068118A6DB1C161172CB5, xmp.iid:C69D838E4A2068118A6DB1C161172CB5, xmp.iid:C79D838E4A2068118A6DB1C161172CB5, xmp.iid:9158C55E4B2068118A6DB1C161172CB5, xmp.iid:9258C55E4B2068118A6DB1C161172CB5, xmp.iid:9358C55E4B2068118A6DB1C161172CB5, xmp.iid:6ECE40FD372068118083EE4EC423E94F, xmp.iid:75CE40FD372068118083EE4EC423E94F, xmp.iid:F59DB22D382068118083EE4EC423E94F, xmp.iid:61EF793A092068118083D1F4E182A9DE, xmp.iid:62EF793A092068118083D1F4E182A9DE, xmp.iid:78D07ABB15206811808397F12C2FB7D5, xmp.iid:B2B200101D206811808397F12C2FB7D5, xmp.iid:BE84D21E1E206811808397F12C2FB7D5, xmp.iid:E6B3B22E1E206811808397F12C2FB7D5, xmp.iid:C3D8483B49206811871FD072485E7117, xmp.iid:690165314B206811871FD072485E7117, xmp.iid:BCAFA620202068118C14EA11703E82CD History When : 2010:09:29 16:09:49-07:00, 2010:09:29 16:09:49-07:00, 2010:12:20 14:55:43-08:00, 2010:12:20 14:55:43-08:00, 2010:12:20 14:59:50-08:00, 2010:12:20 15:07:13-08:00, 2010:12:20 15:07:23-08:00, 2010:12:20 15:07:23-08:00, 2010:12:20 15:09:32-08:00, 2010:12:20 15:09:32-08:00, 2010:12:22 10:18:45-08:00, 2010:12:22 10:18:52-08:00, 2010:12:22 10:18:52-08:00, 2010:12:22 12:01:07-08:00, 2010:12:22 12:01:07-08:00, 2011:01:04 14:25:20-08:00, 2011:03:22 13:18:55-07:00, 2011:05:19 12:30:12-07:00, 2011:05:19 12:30:12-07:00, 2011:06:14 13:22:38-07:00, 2011:06:14 13:22:38-07:00, 2011:07:19 13:22:08-07:00, 2011:07:22 11:01:29-07:00, 2011:07:22 11:02:01-07:00, 2011:07:22 11:09-07:00, 2011:08:23 08:13:14-07:00, 2011:08:23 08:13:14-07:00, 2011:09:19 13:57:20-07:00, 2011:09:19 15:37:50-07:00, 2011:09:19 15:41:29-07:00, 2011:09:19 15:47:06-07:00, 2011:09:19 15:47:13-07:00, 2011:09:19 15:47:18-07:00, 2011:09:19 15:48:58-07:00, 2011:09:19 15:49:04-07:00, 2011:09:19 15:50:13-07:00, 2011:09:19 15:51:37-07:00, 2011:09:19 15:53:05-07:00, 2011:09:19 15:54:13-07:00, 2011:09:19 15:55:54-07:00, 2011:09:19 16:00:11-07:00, 2011:09:19 16:01:04-07:00, 2011:09:19 16:01:04-07:00, 2011:09:20 10:00:47-07:00, 2011:09:22 08:41:18-07:00, 2011:09:22 08:45:56-07:00, 2011:09:23 09:06:15-07:00, 2011:09:23 09:06:15-07:00, 2011:10:07 13:45:15-07:00, 2011:10:10 12:32:38-07:00, 2011:10:10 12:54:08-07:00, 2011:10:27 09:38:44-07:00, 2011:10:27 15:45:24-07:00, 2011:11:22 10:26:07-08:00, 2011:11:25 14:57:04-08:00, 2011:12:01 12:30:51-08:00, 2011:12:01 12:33:22-08:00, 2011:12:14 09:12:23-08:00, 2011:12:14 09:12:29-08:00, 2011:12:15 11:14:15-08:00, 2011:12:22 10:28:12-08:00, 2011:12:22 10:28:40-08:00, 2011:12:22 10:29:43-08:00, 2011:12:22 10:29:53-08:00, 2011:12:22 10:35:46-08:00, 2012:01:02 10:07-08:00, 2012:01:02 14:18:46-08:00, 2012:01:02 14:20:17-08:00, 2012:01:05 15:25:45-08:00, 2012:01:05 15:26:20-08:00, 2012:01:05 15:26:27-08:00, 2012:01:05 16:02:41-08:00, 2012:01:05 16:02:51-08:00, 2012:01:05 16:03:37-08:00, 2012:01:05 16:03:46-08:00, 2012:01:16 09:19:33-08:00, 2012:01:16 09:19:33-08:00, 2012:01:16 09:54:50-08:00, 2012:01:16 10:22:36-08:00, 2012:01:16 10:22:36-08:00, 2012:01:16 10:22:46-08:00, 2012:01:16 11:07:37-08:00, 2012:01:16 11:08:17-08:00, 2012:01:16 11:08:17-08:00, 2012:01:16 15:28:48-08:00, 2012:01:17 15:46:22-08:00, 2012:01:17 15:46:22-08:00, 2012:01:17 15:47:02-08:00, 2012:01:17 16:07:08-08:00, 2012:01:17 16:12:57-08:00, 2012:01:17 16:12:57-08:00, 2012:01:17 16:16:20-08:00, 2012:01:17 16:16:20-08:00, 2012:02:10 15:32:20-08:00, 2012:02:10 15:33:19-08:00, 2012:02:10 15:33:42-08:00, 2012:02:14 07:44:48-08:00, 2012:02:14 07:44:48-08:00, 2012:08:24 11:26:13-07:00, 2012:08:24 12:14:05-07:00, 2012:08:24 12:15:09-07:00, 2012:08:24 12:15:36-07:00, 2012:11:15 16:27:23-08:00, 2012:11:15 16:27:42-08:00, 2012:11:28 12:29:06-08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Metadata Date : 2012:11:28 12:30:17-08:00 Creator Tool : Adobe InDesign CS5 (7.0) Doc Change Count : 1987 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 12EXIF Metadata provided by EXIF.tools