Harbor Freight 2 1 3 Cu Ft Steel Trailer Tongue Box Product Manual

Manual for the 61602 2.31 cu. ft. Steel Trailer Tongue Box 61602 2-1/3 cu. ft. Steel Trailer Tongue Box

2015-05-27

: Harbor-Freight Harbor-Freight-2-1-3-Cu-Ft-Steel-Trailer-Tongue-Box-Product-Manual-723722 harbor-freight-2-1-3-cu-ft-steel-trailer-tongue-box-product-manual-723722 harbor-freight pdf

Open the PDF directly: View PDF PDF.
Page Count: 4

Page 2 For technical questions, please call 1-800-444-3353. Item 61602
Specifications
Storage capacity 2.31 cu. ft.
Inside dimensions 11 in. L x 27-1/2 in. - 34-1/2 in. W x 11-1/2 in. H
Overall dimensions 12 in. L x 35 in. W x 12-1/8 in. H
IMPORTANT SAFETY INFORMATION
Installation Precautions
1. Install only according to these instructions.
Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and
heavy-duty work gloves during installation.
3. Keep installation area clean and well lit.
4. Keep bystanders out of the area during installation.
5. Do not install when tired or when under the
influence of alcohol, drugs or medication.
6. Product capabilities apply to properly and
completely installed product only.
Use Precautions
1. This product is not a toy. Do not allow
children to play with or near this item.
2. Use as intended only.
3. Inspect before every use; do not use if parts are
loose or damaged. Before use, check that the “U”
bolts, support plates, and nuts are tightened securely.
4. Lock trailer box before transporting.
5. Follow Department of Transportation (DOT)
regulations.
6. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7. WARNING: The brass components of this
product contain lead, a chemical known to
the State of California to cause birth defects
(or other reproductive harm). (California
Health & Safety code § 25249.5, et seq.)
Mounting Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document
including all text under subheadings therein before set up or use of this product.
1. Place the Box on the trailer tongue (not
supplied) with the wider part near the trailer.
2. Insert a “U” bolt through one of the Plates.
Insert the legs of the “U” Bolt through the holes
in the bottom of the Box to straddle the trailer
tongue bar. Repeat with the other “U” Bolt.
3. Fit a Plate over the legs of a “U” Bolt and hold
in place with two Nuts. Repeat for other side.
4. Tighten all 4 Nuts, firmly clamping the
Box onto the trailer tongue.
NOTE: Two keys are provided. Keep these
in a safe place when not in use.
5. Occasionally apply a lock lubricant to the
lock to keep it in good condition.
Page 3For technical questions, please call 1-800-444-3353.Item 61602
Parts List and Diagram
Part Description Qty
1 Box 1
2 Lid 1
3 Hinge 2
4 Gas Lid Support 1
5 Lock 1
Part Description Qty
6 “U”Bolt Set (“U” Bolt,
2 Plates, 2 Nuts each)
2
7 Gasket 1
8 Key (not shown) 2
2
4
1
5
6
3
7
Record Serial Number Here:
Note: If product has no serial number, record
month and year of purchase instead.
Note: Some parts are listed and shown for
illustration purposes only, and are not available
individually as replacement parts.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,
and warrants to the original purchaser that this product is free from defects in materials and workmanship for the
period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,
to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper
installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries
to persons or property, or for incidental, contingent, special or consequential damages arising from the use of
our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

Navigation menu