Harbor Freight 22 In Magnetic Floor Sweeper With Release Product Manual

Harbor-Freight-98399-Users-Manual-210185 harbor-freight-98399-users-manual-210185

Manual for the 98399 22 Magnetic Floor Sweeper with Release 98399 22 Magnetic Floor Sweeper with Release

98399 to the manual 65947b33-afaf-4437-9f43-656498bb8eb3

: Harbor-Freight Harbor-Freight-22-In-Magnetic-Floor-Sweeper-With-Release-Product-Manual-723753 harbor-freight-22-in-magnetic-floor-sweeper-with-release-product-manual-723753 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

22” magnetic floor sweeper
with release

98399

Instructions and precautions
Visit our website at: http://www.harborfreight.com

	Save these instructions. Read all
precautions and instructions.
Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product
may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Specifications

Ground clearance

2-1/8” H, 1” Low

Magnetic Pulling Force

9 Lbs.

Handle Length

Adjusts from 37” to 51”

Revised Manual 10h

Unpacking

When unpacking, check to make sure that
the item is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight Tools
at the number shown on the cover of this document
as soon as possible.

Important SAFETY
Information

Assembly
Figure 1
Sweeper
Handle (3)

Assembly Precautions
1.	

Assemble only according to these instructions. Improper assembly can create hazards.

2.	

Wear ANSI-approved safety goggles and
heavy-duty work gloves during assembly.

3.	

Keep assembly area clean and well lit.

4.	

Keep bystanders out of the area during assembly.

5.	

Do not assemble when tired or when under
the influence of drugs or medication.

Use Precautions
1.	

This product is not a toy. Do not allow children to play with or near this item.

2.	

Keep work area clean and well lit. Cluttered
or dark areas invite accidents.

3.	

4.	

Pan Head
Bolt (7)

Magnet
Handle
Housing (1) Base (5)
1.	

Figure 2

Wing Nut

The Sweeper contains a 9 Lb. magnetic pull
capacity and should not be used around materials and components that can be damaged
when exposed to a magnet.
Use for intended purpose only.

6.	

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.

7.	

Inspect before use; do not use if parts loose
or damaged.

8.	

Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact Harbor
Freight Tools for a replacement.
	Read the entire Important
Safety Information section at the
beginning of this document including
all text under subheadings therein
before set up or use of this product.

SKU 98399	

Insert Sweeper Handle (3) into Handle Base
(5) and secure with Pan Head Bolt (7). See
Figure 1, above.

operation

People with pacemakers should consult their
physician(s) before use. Electromagnetic
fields in close proximity to heart pacemaker
could cause pacemaker interference or pacemaker failure.

5.	

Housing
Handle (6)

Sweeper
Handle (1)
1.	

Adjust the Sweeper Handle (3) to the desired
height by unscrewing Wing Nut and sliding
handle tube up or down-see Figure 2, above.
The Handle telescopes from 37” to 51” when
extended.

2.	

When the desired height is reached, tighten
the Wing Nut into place.

3.	

While holding the handle, roll the Magnetic
Sweeper across the desired floor area such
as a workshop, garage, warehouse, etc. The
Magnetic Sweeper will pick up metal objects
such as nails, pins, bolts, screws and metal
shavings.

For technical questions, please call 1-800-444-3353.

Page 2

Figure 3

Parts List & assembly
diagram

Part

4.	

To release the material that has been picked
up by the Magnetic Sweeper, place Housing
(1) over a trash can or desired debris destination. Pull up on the Housing Handle as
shown in Figure 3, above.

Description

1

Housing

Qty.
1

2

Wheel

2

3

Handle

1

4

Bolt/Washer

5

Handle Base

1

6

Housing Handle

1

7

Pan Head Bolt

1

2 sets

Please note: Move the Sweeper away from
the debris before releasing the Housing
Handle or it will pick up the debris again.

cleaning and maintenance
1.	

BEFORE EACH USE, inspect the general
condition of the Floor Sweeper. Check for
loose screws, misalignment or binding of
moving parts, cracked or broken parts and
any other condition that may affect its safe
operation.

2.	

After Use, clean external surfaces of the
Sweeper with clean cloth.
Record Serial Number Here:

Note:	If product has no serial number, record
month and year of purchase instead.
Note:	Some parts are listed and shown for illustration purposes only, and are not available
individually as replacement parts.

5
6

7

PLEASE READ THE FOLLOWING CAREFULLY
The manufacturer and/or distributor has provided
the parts list and assembly diagram in this document
as a reference tool only. Neither the manufacturer
or distributor makes any representation or warranty
of any kind to the buyer that he or she is qualified to
make any repairs to the product, or that he or she
is qualified to replace any parts of the product. In
fact, the manufacturer and/or distributor expressly
states that all repairs and parts replacements should
be undertaken by certified and licensed technicians,
and not by the buyer. The buyer assumes all risk and
liability arising out of his or her repairs to the original
product or replacement parts thereto, or arising
out of his or her installation of replacement parts
thereto.

SKU 98399	

For technical questions, please call 1-800-444-3353.

Page 3



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42
Instance ID                     : uuid:75c5556c-d83b-4c6c-9aac-3b39b7144d76
Document ID                     : adobe:docid:indd:9f293423-83a6-11df-b5e7-b3d13872434b
Rendition Class                 : proof:pdf
Derived From Instance ID        : f3276052-63d1-11dd-b91e-a4950e9d6c1b
Derived From Document ID        : adobe:docid:indd:74b8ecc5-1ab5-11dd-b6f6-84167ddd730c
Manifest Link Form              : ReferenceStream
Manifest Placed X Resolution    : 200.00
Manifest Placed Y Resolution    : 200.00
Manifest Placed Resolution Unit : Inches
Manifest Reference Instance ID  : uuid:E4DFB0BED363DD118BDFEC147F6A9909
Create Date                     : 2010:08:23 13:39:20-07:00
Modify Date                     : 2010:08:23 13:39:21-07:00
Metadata Date                   : 2010:08:23 13:39:21-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0.3)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 9144 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 3
Creator                         : Adobe InDesign CS3 (5.0.3)

EXIF Metadata provided by EXIF.tools