Harbor Freight 30 Amp Solar Charge Controller Product Manual
2015-05-27
: Harbor-Freight Harbor-Freight-30-Amp-Solar-Charge-Controller-Product-Manual-723992 harbor-freight-30-amp-solar-charge-controller-product-manual-723992 harbor-freight pdf
Open the PDF directly: View PDF .
Page Count: 8
Download | |
Open PDF In Browser | View PDF |
500 Watt Charge Controller Item 68738 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-800-444-3353 as soon as possible. Visit our website at: http://www.harborfreight.com Email our tech support at: tech@harborfreight.com Copyright© 2011 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. IMPORTANT SAFETY INFORMATION In this manual, on the labeling, and all other information provided with this product: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION, used with the safety alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Installation Precautions 1. Exercise special caution if working on roof or another high location. Keep proper footing and balance at all times. Follow ladder supplier’s precautions whenever working near or on a ladder. 2. Install all sensitive electrical components (including wiring connections, regulator, and battery) inside a weatherproof enclosure to prevent electric shock. 3. Do not wire multiple panels in series. If you need to connect two or more solar panels together, this work must be done by a qualified electrician unless they are connected through a regulator. 4. This solar panel kit is not designed for tie-in to a grid. Only a licensed electrician and a licensed building contractor can safely design and implement a grid tie-in system. Any grid tie-in system must meet all applicable building and electrical codes, and must meet standards established by the area power company. Improper grid tie-in can result in electrocution, fire, and other serious personal injury and property damage. An incorrectly installed grid tie-in system can cause feedback voltage, resulting in electrocution of electrical utility workers. 5. Do not stand on or otherwise apply pressure to panel. 6. Handle solar panel with care, edges may be sharp. 7. Do not focus light on panel. NOTICE is used to address practices not related to personal injury. CAUTION, without the safety alert symbol, is used to address practices not related to personal injury. WARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/ or serious injury. Save all warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Page 2 8. Install components with enough space to allow proper cooling. 9. This product may occasionally produce more current and/or voltage than its rated output. Increase output ratings by 25% when determining component required voltage and amperage ratings. Refer to Section 690-8 of the National Electrical Code for an additional multiplying factor of 125 percent (80 percent derating) which may apply. For technical questions, please call 1-800-444-3353. SKU 68738 10. Panel must be connected using UL listed outdoor rated wire of the correct thickness (gauge) for the amperage rating and length (see warning number 9 also). Follow the guidelines in the chart below: Current in Amps 0-5 6-7 8 10 11-12 15 18 20 22-24 30 5' Maximum Length 10' 15' 20' 25' 18 18 18 18 16 16 16 14 18 16 16 14 14 12 16 14 12 12 10 10 Minimum Wire Gauge 11. Install an appropriate charge controller/regulator to regulate output and prevent damage. Do not attach panel to battery or power grid without proper regulator, inverter, and/or charge controller. 12. Install and use according to applicable National Electrical Code (NEC) standards. 13. This panel is not rated for use as fire-resistant roofing. If installing on a roof, install only over a fire resistant roof covering rated for the application. 14. Verify that installation surface has no hidden utility lines before drilling or driving screws. 15. Install only according to these instructions. Improper installation can create hazards. 16. Wear ANSI-approved safety goggles and heavyduty work gloves during installation. Do not wear jewelry or metal watches when working near solar panels, wiring or batteries. 17. Handle panel with care. Glass may break or a sharp edge may be exposed during movement. 18. Keep installation area clean and well lit. 19. Install out of reach of children. 20. Keep bystanders out of the area during installation. 21. Do not install when tired or when under the influence of drugs or medication. 22. Use in 12 VDC systems only. Battery Precautions 3. Charge, store, and maintain batteries according to supplier’s instructions. Service Precautions 1. Before service, maintenance, or cleaning: a. Dry solar panels and outdoor wiring thoroughly while wearing electrically insulated gloves. b. Cover all solar panels with an opaque cover, such as a blanket. c. Disconnect all solar panels. d. Disconnect all batteries. 2. Do not service during rain, fog, or any other wet/humid weather. 3. Do not stand on or otherwise apply pressure to panel. 4. Do not allow children to play with or near this item or electrical components. 5. Inspect at least monthly; do not use if damaged, parts are loose, water is found inside the housing, electrical insulation is cracked or damaged, or connections are loose. 6. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 7. WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling. (California Health & Safety Code § 25249.5, et seq.) SAVE THESE INSTRUCTIONS. Specifications Max. Input Current 500 Watt Rated Output 12VDC Over Charge Voltage 14.5V + 0.4V Note: Output will decrease as the panel gets hotter than room temperature (~70° F). Angle, solar intensity, cloud cover and other factors will effect output. 1. Wear splash-resistant ANSI-approved safety goggles and electrically insulated gloves while working near batteries. 2. Use an appropriate charge controller whenever connected to battery. SKU 68738 For technical questions, please call 1-800-444-3353. Page 3 Wiring Installation Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product: Note: Only a licensed electrician and a licensed building contractor can safely design and implement a grid tie-in system. Any grid tie-in system must meet all applicable building and electrical codes, and must meet standards established by the area power company. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. 1. Run wires from panels, through weatherproof grommets and into enclosure where charge controller/regulator is located. Use wires of the proper size and rating and use twist connectors (not included) to connect wires. Identifying Port Connections 2. Secure all connections using terminals, or solder all wire splices to ensure good connections. 1. The battery should be connected to the ports that show the battery icon with a + and symbol. Please note that “+” stands for positive pole and “-” stands for the negative pole. 2. The DC load should be connected to the ports that show the light bulb icon and the positive (+) and negative (-) symbols. 3. The Solar Panel should be connected to the ports marked with the solar panel symbol and the positive (+) and negative (-) symbols. WARNING! Follow indicated polarity for all connections and verify all connections are secure before use. 3. Weatherproof all connections and route the wire in a way that it will not be torn loose from the panel. 4. Allow system to charge according to the solar panel’s instructions. Operation The Display Button (marked by the triangle symbol) works in a cycle pattern. See below. Making Connections WARNING! When disconnecting or connecting, always follow this sequence: Disconnecting: 1. Disconnect the positive and then negative ports of the Solar Panel. 2. Turn off the Load Switch (designated by the bulb icon), then disconnect the load ports. 3. Disconnect the positive and then negative ports. WARNING! Do not disconnect battery before disconnecting solar panel. Connecting: 1. Connect the battery ports, first positive and then negative. 2. Connect the solar panel ports, first positive and then negative. 3. Connect the load ports, first positive and then negative. Display Button Load Switch By pressing the button, the LED will toggle through the three different modes: a. Battery Voltage (12V) b. Output Current to Load (18A) c. Solar Charge Current (18A) 1. Mode 1 / Battery Voltage: The LCD will show the working voltage of the battery (12V, for example) Pressing the Load Switch in this mode will NOT change the display on the LED. 2. Press the Display Button again (Mode 2) and the LED will show the output current from battery to load (18A). If the Load Switch is ON, the display will not change. If the Load Switch is OFF, the LED will show 00.0 A. Page 4 For technical questions, please call 1-800-444-3353. SKU 68738 If the overload discharge is triggered in this mode, the load output will be cut off. Pressing the Load Switch will cause an alarm to sound. Note: It is normal to see up to 20% degradation in amorphous silicon solar panel performance within the first 6 months before the amorphous coating stabilizes. Once system recovers from over discharge or overload, press the Load Switch to reset the load output function. Cleaning 3. Press the Display Button a third time and the LED will show the charging current from the solar panel to the battery (18A). Pressing the Switch Button in this mode will change the LED display. 4. WARNING! Connect Battery Clamps according to correct polarity (red for positive and black for negative.) Do not short circuit the Battery Clamp. 5. CAUTION: When installing Charge Controller to Solar System, always verify that battery voltage and solar panel voltage are matching. The input current from the Solar Panel should not exceed the max. solar input current limit of the Charge Controller. 6. NOTE: It is normal for the current on LED display to change. Since the battery is changing between charging and discharging status when in overcharger protection, the current variation is normal. Clean and inspect all parts of the Solar Power System MONTHLY, or more frequently to maintain peak efficiency. 1. Wear electrically insulated gloves and ANSI-approved safety goggles. Dry solar panel and outdoor wiring thoroughly. 2. Cover solar panels with an opaque cover, such as a blanket. 3. Disconnect solar panel and batteries. 4. Clean solar panel with mild, non-abrasive cleanser and soft cloth and paper towels. Do not clean with brushes or abrasive cleaners. 5. Inspect the general condition of the Solar Power System, including panel, batteries, controllers, and mounting connections. Check for loose hardware, wiring insulation damage or weathering, cracked glass, open housing, cracked or broken parts, loose or corroded contacts, and any other condition that may affect its safe operation. 6. Inspect and maintain batteries according to supplier’s instructions. Servicing Procedures not specifically explained in this manual must be performed by a qualified technician. Adjustment To increase efficiency: 1. In the Winter, increase the panel’s angle by 10°. TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK: Before service, maintenance or cleaning: a. Dry Charge Controller and outdoor wiring thoroughly while wearing electrically insulated gloves. 2. In the Summer, decrease the angle by up to 10°. 3. In the Spring and Fall, keep the panel at the angle recommended by solar panel’s instruction manual. b. Cover solar panel with an opaque cover, such as a blanket. c. Disconnect solar panel after use. d. Disconnect all batteries after use. TO PREVENT SERIOUS INJURY FROM ELECTRIC SHOCK OR CUTS: Do not use damaged Charge Controller. If wiring insulation is damaged or weathered, solar panel glass is cracked, or housing is opened, have the problem corrected before further use. SKU 68738 For technical questions, please call 1-800-444-3353. Page 5 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Parts List Part 1 2 3 4 5 Description Cover Switch Board Screws PCB Board Output Screws Qty. 1 2 4 1 2 Part 6 7 8 9 Description Base Base Screws Output Jack Display Board Qty. 1 4 1 1 Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 6 For technical questions, please call 1-800-444-3353. SKU 68738 Assembly Diagram SKU 68738 For technical questions, please call 1-800-444-3353. Page 7 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:e2777b6f-b5de-d541-8873-742748349238 Document ID : xmp.did:C44B2474152068118C14FE1E1FFB255D Original Document ID : adobe:docid:indd:9a86526b-7edf-11df-9488-aa083f618b49 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:C34B2474152068118C14FE1E1FFB255D Derived From Document ID : xmp.did:189664E53D20681180839D99F3060A4F Derived From Original Document ID: adobe:docid:indd:9a86526b-7edf-11df-9488-aa083f618b49 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:098011740720681180838C9C05070FEC, xmp.iid:0A8011740720681180838C9C05070FEC, xmp.iid:B53007792B20681180838C9C05070FEC, xmp.iid:B63007792B20681180838C9C05070FEC, xmp.iid:B73007792B20681180838C9C05070FEC, xmp.iid:B83007792B20681180838C9C05070FEC, xmp.iid:179664E53D20681180839D99F3060A4F, xmp.iid:189664E53D20681180839D99F3060A4F, xmp.iid:199664E53D20681180839D99F3060A4F, xmp.iid:1A9664E53D20681180839D99F3060A4F, xmp.iid:A332D2BD0F2068118C14FE1E1FFB255D, xmp.iid:A432D2BD0F2068118C14FE1E1FFB255D, xmp.iid:BE4B2474152068118C14FE1E1FFB255D, xmp.iid:BF4B2474152068118C14FE1E1FFB255D, xmp.iid:C04B2474152068118C14FE1E1FFB255D, xmp.iid:C14B2474152068118C14FE1E1FFB255D, xmp.iid:C24B2474152068118C14FE1E1FFB255D, xmp.iid:C34B2474152068118C14FE1E1FFB255D, xmp.iid:C44B2474152068118C14FE1E1FFB255D, xmp.iid:E6E1443D352068118C14FB08BA0B5CAA, xmp.iid:D7BF34DC252068118C148D12F3FDD329, xmp.iid:9D31611B2F2068118C14A0E39DA5AAED, xmp.iid:624C31CF492068118C14A0E39DA5AAED, xmp.iid:4CC4E5E5122068118083C50DF9C3EE15, xmp.iid:66F498251C2068118083C50DF9C3EE15, xmp.iid:69F498251C2068118083C50DF9C3EE15, xmp.iid:6CF498251C2068118083C50DF9C3EE15, xmp.iid:6FF498251C2068118083C50DF9C3EE15, xmp.iid:C3D1E190322068118083C50DF9C3EE15, xmp.iid:A9525AB7322068118083C50DF9C3EE15, xmp.iid:B0525AB7322068118083C50DF9C3EE15, xmp.iid:F97F1174072068118083B9BB7489DB37, xmp.iid:FB7F1174072068118083B9BB7489DB37, xmp.iid:9532DF0E262068118083B9BB7489DB37, xmp.iid:9732DF0E262068118083B9BB7489DB37, xmp.iid:F87F1174072068118083E009C9A26F2A, xmp.iid:B98F9C2C0F2068118083B0AEF24A46E4, xmp.iid:BB8F9C2C0F2068118083B0AEF24A46E4, xmp.iid:BE8F9C2C0F2068118083B0AEF24A46E4, xmp.iid:8C118ED33C2068118083B0AEF24A46E4, xmp.iid:FC7F1174072068118083F345C8DFBB8C, xmp.iid:A380FDA2262068118083F345C8DFBB8C, xmp.iid:A780FDA2262068118083F345C8DFBB8C, xmp.iid:AB80FDA2262068118083F345C8DFBB8C, xmp.iid:CE076933332068118083F345C8DFBB8C, xmp.iid:D1076933332068118083F345C8DFBB8C, xmp.iid:D4076933332068118083F345C8DFBB8C, xmp.iid:8A18B5B3422068118083F345C8DFBB8C, xmp.iid:8D18B5B3422068118083F345C8DFBB8C, xmp.iid:38D7CF25352068118083CB025FFBDA7E, xmp.iid:EE8B673B362068118083CB025FFBDA7E, xmp.iid:97A03F650E2068118083D135A176B9B1, xmp.iid:AAED7955082068118C14B7E83111D656, xmp.iid:DA3763E51A2068118C14B7E83111D656, xmp.iid:DE3763E51A2068118C14B7E83111D656, xmp.iid:CB3223091C2068118C14ECBC0CDCD2FD, xmp.iid:91FB7BB8222068118C14E7314E749540, xmp.iid:40720A1B232068118C14E7314E749540, xmp.iid:44720A1B232068118C14E7314E749540, xmp.iid:48720A1B232068118C14E7314E749540, xmp.iid:DB78B0E7232068118C14E7314E749540, xmp.iid:DF78B0E7232068118C14E7314E749540, xmp.iid:E078B0E7232068118C14E7314E749540, xmp.iid:0B80D00B242068118C14E7314E749540, xmp.iid:0F80D00B242068118C14E7314E749540, xmp.iid:1380D00B242068118C14E7314E749540, xmp.iid:8409165B242068118C14E7314E749540 History When : 2010:09:28 09:17:42-07:00, 2010:09:28 09:17:42-07:00, 2010:09:28 16:00:42-07:00, 2010:09:28 16:00:42-07:00, 2010:09:28 16:05:47-07:00, 2010:09:28 16:05:47-07:00, 2010:12:22 15:22:32-08:00, 2010:12:22 15:22:32-08:00, 2010:12:22 15:30:29-08:00, 2010:12:22 16:00:48-08:00, 2010:12:23 10:18:17-08:00, 2010:12:23 10:41:13-08:00, 2010:12:23 10:42:03-08:00, 2010:12:23 10:55:05-08:00, 2010:12:23 10:56:39-08:00, 2010:12:23 10:57:37-08:00, 2010:12:23 10:57:37-08:00, 2010:12:23 10:57:48-08:00, 2010:12:23 10:57:48-08:00, 2011:01:04 14:25:18-08:00, 2011:01:12 12:26:02-08:00, 2011:01:20 15:25-08:00, 2011:01:20 16:13:21-08:00, 2011:04:29 10:57:14-07:00, 2011:04:29 10:57:14-07:00, 2011:04:29 11:52:31-07:00, 2011:04:29 13:47:59-07:00, 2011:04:29 13:55:52-07:00, 2011:04:29 14:08:26-07:00, 2011:04:29 14:09:31-07:00, 2011:04:29 14:56:56-07:00, 2011:05:02 09:59:25-07:00, 2011:05:02 11:52:31-07:00, 2011:05:02 14:06:41-07:00, 2011:05:02 15:24:36-07:00, 2011:05:03 08:36:38-07:00, 2011:05:06 11:58:21-07:00, 2011:05:06 12:42:24-07:00, 2011:05:06 13:30:53-07:00, 2011:05:06 14:37:49-07:00, 2011:05:09 09:44:20-07:00, 2011:05:09 11:22:05-07:00, 2011:05:09 11:59:23-07:00, 2011:05:09 12:04:27-07:00, 2011:05:09 13:15:06-07:00, 2011:05:09 13:58:56-07:00, 2011:05:09 14:42:55-07:00, 2011:05:09 15:13:04-07:00, 2011:05:09 15:14:29-07:00, 2011:05:10 13:10:13-07:00, 2011:05:10 13:17:59-07:00, 2011:05:12 10:41:09-07:00, 2011:05:26 10:29:17-07:00, 2011:05:26 10:40:04-07:00, 2011:05:26 10:40:59-07:00, 2011:08:19 11:56:45-07:00, 2011:08:22 12:59:35-07:00, 2011:08:22 13:00:53-07:00, 2011:08:22 13:03:41-07:00, 2011:08:22 13:04:35-07:00, 2011:08:22 13:06:36-07:00, 2011:08:22 13:06:40-07:00, 2011:08:22 13:07:01-07:00, 2011:08:22 13:07:37-07:00, 2011:08:22 13:08:27-07:00, 2011:08:22 13:08:49-07:00, 2011:08:22 13:09:50-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2011:08:22 13:10:11-07:00 Modify Date : 2011:08:22 13:10:12-07:00 Metadata Date : 2011:08:22 13:10:12-07:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Doc Change Count : 14164 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 8 Creator : Adobe InDesign CS5 (7.0.4)EXIF Metadata provided by EXIF.tools