Harbor Freight 36 In Bolt Cutters Product Manual

Harbor-Freight-18-In-Bolt-Cutters-Product-Manual-723853 harbor-freight-18-in-bolt-cutters-product-manual-723853

Harbor-Freight-24-In-Bolt-Cutters-Product-Manual-723852 harbor-freight-24-in-bolt-cutters-product-manual-723852

Harbor-Freight-41148-Owner-S-Manual harbor-freight-41148-owner-s-manual

Harbor-Freight-41149-Owner-S-Manual harbor-freight-41149-owner-s-manual

Harbor-Freight-41150-Owner-S-Manual harbor-freight-41150-owner-s-manual

: Harbor-Freight Harbor-Freight-36-In-Bolt-Cutters-Product-Manual-723854 harbor-freight-36-in-bolt-cutters-product-manual-723854 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 1

Download
Open PDF In Browser	View PDF

ITEM
41147 12”
41148 18”
41149 24”
41150 36”
41151 42”

Bolt CutterS

JAW GAP ADJUSTMENT INSTRUCTIONS

Bolt cutter jaws are set at the factory. However, it is a good practice to “fine tune”
them prior to each use.
1.	 The two screws on the side of one of the handles perform the following:
•	 Hex head screw located on the jaws end of the adjustment link sets the jaws
gap at their tip end.
•	 Hex screw with washer at the handle end of the adjustment link sets the
jaws gap at the joint end.
Note 1: Before each adjustment, open the jaws slightly. When closing the jaws,
make sure that the jaw heels do not press against one another.
2.	 Correctly set jaws will have a uniform gap along the length of their edges. To
verify the gap, place a sheet of paper between the jaws and fully close them.
They should hold the paper in place.
Note 2: Do not turn the screws more than 1/6th of a turn (one flat of the hex) at a
time.

WARNING

1.	
2.	
3.	
4.	

To prevent serious injury:
Wear ANSI-approved safety goggles during use.
Never use on live electrical circuits.
Keep fingers clear of sharp blades.
Keep out of children’s reach.
Distributed exclusively by Harbor Freight Tools®.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com

	Read this material before using this product.
Failure to do so can result in serious injury.	
Save this manual.
Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.

For technical questions or replacement parts, please call 1-800-444-3353.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42
Instance ID                     : uuid:8eda4ef6-4db4-46e7-bea2-e42523e42b7a
Document ID                     : adobe:docid:indd:a4cacd33-1ee6-11de-971a-fe5edb2186c6
Rendition Class                 : proof:pdf
Derived From Instance ID        : 580d1912-1e33-11de-9b4d-e28213b80a7c
Derived From Document ID        : adobe:docid:indd:7f94fc0b-1ad7-11de-84ae-d2c4a4bc0d7f
Create Date                     : 2009:04:08 10:27:37-07:00
Modify Date                     : 2009:04:08 10:27:37-07:00
Metadata Date                   : 2009:04:08 10:27:37-07:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 12031 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 1
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools