Harbor Freight 3 In 1 Stud Finder With Voltage And Metal Detection Product Manual
Manual for the 67801 3-In-1 Stud Finder with Voltage and Metal Detection 67801 3-In-1 Stud Finder with Voltage and Metal Detection
2015-05-27
: Harbor-Freight Harbor-Freight-3-In-1-Stud-Finder-With-Voltage-And-Metal-Detection-Product-Manual-723891 harbor-freight-3-in-1-stud-finder-with-voltage-and-metal-detection-product-manual-723891 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Stud/Voltage Detector Item 67801 When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1‑800‑444‑3353 as soon as possible. Specifications Battery 1x 9V Stud Range <3/4″ Deep Ferrous Metal Range <1-1/2″ Deep Copper Pipe Range <1-3/16″ Deep Voltage Range 90-250 V~, 50-60 Hz (unshielded) <1-1/2″ Deep Important Safety Information INSTRUCTIONS AND PRECAUTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Copyright© 2011 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions, please call 1‑800‑444‑3353. 1. This device may not detect items that are shielded, behind dense materials (such as plywood), or are deeper than its listed detection depths. 2. This product is not a toy. Do not allow children to play with or near this item. 3. Inspect before every use; do not use if parts are loose or damaged. 4. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 5. Position batteries in proper polarity and do not install batteries of different types, charge levels, or capacities together. 4. The Power LED shows that the unit is on and ready to start detecting. Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document before set up or use of this product. 3 4 2 5 1 5. The Low Battery LED lights when the battery voltage is low. Low battery voltage may effect performance. DO NOT USE IF BATTERY VOLTAGE IS LOW. Stud Detection TO PREVENT SERIOUS INJURY AND ELECTROCUTION: Turn off all circuits with wires inside the wall before working. Depending on the proximity of electrical wiring or pipes to the wall surface, the scanner may detect them in the same manner as studs. Use caution when nailing, cutting, or drilling in walls, floors, and ceilings that may contain these items. Studs or joists are normally spaced 16″ or 24″ apart and are 1-1/2″ wide. Anything closer together or of a different width may not be a stud, joist, or firebreak. 1. Slide the Switch to the “STUD” position. 2. Hold the detector flat against the wall. Press and hold Power Button. Figure A: Controls 1. Use the Mode Switch to select what type of material you want to detect. 2. The Power Button activates the detector while pressed. Release it to turn the detector off. 3. The Indicator LED’s show what type of material is detected: Metal, Voltage or Stud. Page 2 3. The Power LED lights when the detector is ready to operate. 4. Slowly slide unit horizontally across wall, left to right. Keep the unit base in contact with the wall. The Stud LED lights and the unit starts emitting a steady tone when it detects the edge of a stud. When that happens, mark the spot over the top center of the detector. For technical questions, please call 1-800-444-3353. SKU 67801 5. Place the unit on the wall a few inches to the right of where it detected the stud. Then move it slowly from right to left, horizontally across the wall and mark the spot when stud detects again. Between the two spots is the stud position. 6. Repeat the process to confirm position of studs. Metal Detection 1. Slide the switch to the “METAL” position. 2. Press and hold Power Button. Calibrate the unit in air away from metal objects. 3. The Power LED lights when the detector is ready to operate. Position unit flat against wall. Voltage Detection TO PREVENT SERIOUS INJURY AND ELECTROCUTION: The unit will not detect live wires inside metal pipe or metal conduit, behind metallic wall covering, or behind some plywood or other dense materials. Use extra caution in these construction situations. Always turn the power off when nailing, cutting, or drilling near electrical wire. NOTE: Because the unit is sensitive it may indicate metal while passing through the air. Simply release Power Button, place on the wall, and press Power Button on again. This effectively re-calibrates the electronics. The unit detects from 90 to 250 V at 50 to 60 Hz AC in a HOT unshielded electrical wire that is within 1-1/2″ of wall surface. The sensor is located in the center of the back of the unit. 4. Slowly slide unit horizontally across wall, left to right. Keep the unit base in contact with the wall. The Metal LED lights and the unit starts emitting a steady tone when it 1. Turn power on in the wall you detects the edge of a metal object. will try to detect voltage in. When that happens, mark the spot The power must be turned off later over the top center of the detector. after detection and before work to reduce the risk of accidental shock. 5. Place the unit on the wall a few inches to the right of where 2. Slide the switch to the it detected the metal object. “VOLT” position. Then move it slowly from right to 3. Press and hold Power Button. left, horizontally across the wall Calibrate the unit in air away and mark the spot when Metal from metal objects. detects again. Between the two spots is the metal object’s position. 4. The Power LED lights when the detector is ready to operate. 6. Repeat the process to confirm Position unit flat against wall. position of metal objects. 5. Slowly slide unit horizontally across wall, left to right. Keep the unit base in contact with the wall. The Volt LED lights and the unit SKU 67801 For technical questions, please call 1-800-444-3353. Page 3 starts emitting a steady tone when it detects the edge of a live wire. When that happens, mark the spot over the top center of the detector. 6. Place the unit on the wall a few inches to the right of where it detected the live wire. Then move it slowly from right to left, horizontally across the wall and mark the spot when Volt detects again. Between the two spots is the live wire’s position. 7. Repeat the process to confirm position of live wires. 8. WARNING! TO PREVENT SERIOUS INJURY AND DEATH FROM ACCIDENTAL SHOCK: Turn off all circuits within the wall after detection and before working on the wall. Page 4 Battery Replacement Before first use or if Low Battery LED lights up, then replace the batteries: 1. Open battery door on back of case. 2. Connect a 9-volt battery to battery clip. 3. Insert battery into case and replace battery door. Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Replacement parts are not available for this item. For technical questions, please call 1-800-444-3353. SKU 67801
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:737830b6-01b6-044c-ad3b-fbef7e73a12e Document ID : xmp.did:FF7F1174072068118083938105DA3C8D Original Document ID : adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:FE7F1174072068118083938105DA3C8D Derived From Document ID : adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Derived From Original Document ID: adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:7EA511693D20681180839C64BA4E4F1D, xmp.iid:7FA511693D20681180839C64BA4E4F1D, xmp.iid:FA7F1174072068118083938105DA3C8D, xmp.iid:FB7F1174072068118083938105DA3C8D, xmp.iid:FC7F1174072068118083938105DA3C8D, xmp.iid:FD7F1174072068118083938105DA3C8D, xmp.iid:FE7F1174072068118083938105DA3C8D, xmp.iid:FF7F1174072068118083938105DA3C8D, xmp.iid:00801174072068118083938105DA3C8D, xmp.iid:CC8D1DA6122068118083938105DA3C8D, xmp.iid:780470B31820681180839D99F3060A4F, xmp.iid:790470B31820681180839D99F3060A4F, xmp.iid:7A0470B31820681180839D99F3060A4F, xmp.iid:FA8CAC432720681180839D99F3060A4F, xmp.iid:FB8CAC432720681180839D99F3060A4F, xmp.iid:A253E29F3A2068118C14FB08BA0B5CAA, xmp.iid:4D45BE0D0F2068118083BF8CA73742AA, xmp.iid:4E45BE0D0F2068118083BF8CA73742AA, xmp.iid:4F45BE0D0F2068118083BF8CA73742AA, xmp.iid:5045BE0D0F2068118083BF8CA73742AA, xmp.iid:5145BE0D0F2068118083BF8CA73742AA, xmp.iid:5545BE0D0F2068118083BF8CA73742AA, xmp.iid:5645BE0D0F2068118083BF8CA73742AA, xmp.iid:895DDA97162068118083BF8CA73742AA, xmp.iid:8D5DDA97162068118083BF8CA73742AA, xmp.iid:E97F69E1182068118083BF8CA73742AA, xmp.iid:ED7F69E1182068118083BF8CA73742AA, xmp.iid:F17F69E1182068118083BF8CA73742AA, xmp.iid:DA2BA2091A2068118083BF8CA73742AA, xmp.iid:DE2BA2091A2068118083BF8CA73742AA, xmp.iid:E22BA2091A2068118083BF8CA73742AA, xmp.iid:EB50A3691A2068118083BF8CA73742AA, xmp.iid:EF50A3691A2068118083BF8CA73742AA, xmp.iid:F450A3691A2068118083BF8CA73742AA, xmp.iid:F308434C1B2068118083BF8CA73742AA, xmp.iid:F708434C1B2068118083BF8CA73742AA, xmp.iid:9F7C6B231F2068118083BF8CA73742AA, xmp.iid:A67C6B231F2068118083BF8CA73742AA, xmp.iid:40DC16381F2068118083BF8CA73742AA, xmp.iid:94D9CCC03F2068118083BF8CA73742AA, xmp.iid:CCA8701A2B2068118C14869EB82A928B, xmp.iid:C43ACDB32E2068118C14869EB82A928B, xmp.iid:58F2EC342F2068118C14869EB82A928B, xmp.iid:4C138B03382068118C14869EB82A928B, xmp.iid:4D138B03382068118C14869EB82A928B, xmp.iid:13434358492068118C14869EB82A928B, xmp.iid:15434358492068118C14869EB82A928B, xmp.iid:17434358492068118C14869EB82A928B, xmp.iid:19434358492068118C14869EB82A928B, xmp.iid:1B434358492068118C14869EB82A928B, xmp.iid:E8CC7A1E4B2068118C14869EB82A928B, xmp.iid:EACC7A1E4B2068118C14869EB82A928B, xmp.iid:F87F1174072068118083835DB79DB237, xmp.iid:FA7F1174072068118083835DB79DB237, xmp.iid:D66314D52A2068118C14EAFD068BD953, xmp.iid:5130C49C432068118C14EAFD068BD953, xmp.iid:5C7828DE452068118C14EAFD068BD953, xmp.iid:04801174072068118C14B6930D64CC96, xmp.iid:07801174072068118C14B6930D64CC96, xmp.iid:71BD7A240D2068118C14B6930D64CC96 History When : 2010:09:29 16:09:49-07:00, 2010:09:29 16:09:49-07:00, 2010:12:20 14:55:43-08:00, 2010:12:20 14:55:43-08:00, 2010:12:20 14:59:50-08:00, 2010:12:20 15:07:13-08:00, 2010:12:20 15:07:23-08:00, 2010:12:20 15:07:23-08:00, 2010:12:20 15:09:32-08:00, 2010:12:20 15:09:32-08:00, 2010:12:22 10:18:45-08:00, 2010:12:22 10:18:52-08:00, 2010:12:22 10:18:52-08:00, 2010:12:22 12:01:07-08:00, 2010:12:22 12:01:07-08:00, 2011:01:04 14:25:20-08:00, 2011:02:03 09:41:19-08:00, 2011:02:03 09:41:19-08:00, 2011:02:03 09:41:57-08:00, 2011:02:03 09:43:09-08:00, 2011:02:03 10:04:48-08:00, 2011:02:03 10:06:42-08:00, 2011:02:03 10:07:13-08:00, 2011:02:03 10:11:31-08:00, 2011:02:03 10:14:09-08:00, 2011:02:03 10:27:53-08:00, 2011:02:03 10:28:53-08:00, 2011:02:03 10:29:07-08:00, 2011:02:03 10:36:10-08:00, 2011:02:03 10:37:03-08:00, 2011:02:03 10:37:16-08:00, 2011:02:03 10:38:51-08:00, 2011:02:03 10:39:44-08:00, 2011:02:03 10:44:21-08:00, 2011:02:03 10:45:11-08:00, 2011:02:03 10:46:04-08:00, 2011:02:03 11:12:41-08:00, 2011:02:03 11:12:54-08:00, 2011:02:03 11:13:15-08:00, 2011:02:03 15:06:09-08:00, 2011:02:04 12:32:29-08:00, 2011:02:04 12:36:59-08:00, 2011:02:04 12:40:36-08:00, 2011:02:04 13:43:38-08:00, 2011:02:04 13:44:20-08:00, 2011:02:04 15:47:42-08:00, 2011:02:04 15:50:37-08:00, 2011:02:04 15:51:22-08:00, 2011:02:04 15:53:53-08:00, 2011:02:04 15:56:08-08:00, 2011:02:04 16:00:24-08:00, 2011:02:04 16:02:22-08:00, 2011:02:07 08:00:45-08:00, 2011:02:07 08:02:16-08:00, 2011:02:18 15:27:36-08:00, 2011:02:18 15:52:27-08:00, 2011:02:18 16:08:04-08:00, 2011:02:21 08:17:18-08:00, 2011:02:21 08:27-08:00, 2011:02:21 09:32:42-08:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2011:02:21 09:32:49-08:00 Modify Date : 2011:02:21 09:32:49-08:00 Metadata Date : 2011:02:21 09:32:49-08:00 Creator Tool : Adobe InDesign CS5 (7.0.3) Doc Change Count : 4910 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 4 Creator : Adobe InDesign CS5 (7.0.3)EXIF Metadata provided by EXIF.tools