Harbor Freight 4 In Digital Caliper Product Manual

: Harbor-Freight Harbor-Freight-4-In-Digital-Caliper-Product-Manual-723918 harbor-freight-4-in-digital-caliper-product-manual-723918 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 4

Download
Open PDF In Browser	View PDF

Specifications
Display Units
Accuracy
Display
Power Supply

Inches & Millimeters
±0.001" (0.03mm)
0.0005" (0.01mm)
SR44 Button Battery (Included)

Important Safety Information
1. CONTAINS BUTTON BATTERY.
Keep out of your child’s reach.
Discard button batteries carefully.
Do not allow children to play with
devices that contain button batteries.
This product is not a toy.
2. Wear ANSI-approved
safety goggles during use.

4. Do not operate when tired or
when under the influence of
alcohol, drugs or medication.
5. Use as intended only.
6. Inspect before every use; do not use
if parts are loose or damaged.
7. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.

3. Keep work area clean and well lit.

Components and Controls
in/mm
Button

Lock Screw

Battery Cover
OFF ON
Button

ZERO
Button

Prongs

Page 2

For technical questions, please call 1-888-866-5797.

Item 47256

Instructions
1. Push the OFF ON button to turn caliper on. 5. To measure inside of object, set the
top prongs inside object being measured.
2. To toggle measurement between inches
Spread prongs apart until they
and millimeters, press in/mm button.
touch surface of object.
3. With jaws closed, press ZERO
6.
When finished, press OFF ON
to set readout to 0.
to turn off Caliper.
4. To measure outside of object,
7. To replace battery, open battery
set the bottom prongs outside
compartment to right of display, install
object being measured. Slide the jaws
new SR44 battery positive (flat) side up,
together until they gently contact the item.
and slide Battery Cover back into place.
Note: Replacement parts are not available.

Item 47256

Outside Measurement

Inside Measurement

Depth Measurement

Step Measurement

For technical questions, please call 1-888-866-5797.

Page 3

Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise. If our inspection verifies the
defect, we will either repair or replace the product at our election or we may elect
to refund the purchase price if we cannot readily and quickly provide you with a
replacement. We will return repaired products at our expense, but if we determine
there is no defect, or that the defect resulted from causes not within the scope
of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2014:02:07 11:38:50-08:00
Creator                         : Adobe InDesign CC (Macintosh)
Modify Date                     : 2014:02:07 11:39:04-08:00
Has XFA                         : No
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Instance ID                     : uuid:eb9c5d8f-1939-1541-8b0e-fcc9450c8db0
Original Document ID            : adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49
Document ID                     : xmp.id:bd04403d-7099-47b0-a639-c74bc1b94bbc
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:13b79147-1260-4937-b25a-9d3e6125aae9
Derived From Document ID        : xmp.did:1dfc2e3b-a35f-4816-8fe7-c8c6d4b0e2cc
Derived From Original Document ID: adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC (Macintosh)
History Changed                 : /
History When                    : 2014:02:07 11:38:50-08:00
Metadata Date                   : 2014:02:07 11:39:04-08:00
Creator Tool                    : Adobe InDesign CC (Macintosh)
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 4

EXIF Metadata provided by EXIF.tools