Harbor Freight 4 Tier Shelf Rack Product Manual
Manual for the 91883 4-Tier Shelf Rack 91883 4-Tier Shelf Rack
2015-05-27
: Harbor-Freight Harbor-Freight-4-Tier-Shelf-Rack-Product-Manual-723940 harbor-freight-4-tier-shelf-rack-product-manual-723940 harbor-freight pdf
Open the PDF directly: View PDF .
Page Count: 4
Download | |
Open PDF In Browser | View PDF |
4-TIER SHELVING RACK Model 91883 Assembly Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Manual Revised 10g Specifications Overall Dimensions Shelve Spacing Materials Capacity per Shelf Total Capacity 51-5/8” H X 23” W X 12” D 14-1/2” High H/D Polypropylene 44 lb. (dead weight) 176 lb. (evenly distributed) Save This Manual parts and any other condition that may affect the use of this product. Replace loose or worn parts immediately. Any part that is damaged should be properly repaired or replaced. 5. Replacement parts. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. You will need the manual for the safety warnings and precautions, 6. Distribute weight evenly. Uneven assembly instructions, operating and weight distribution could cause maintenance procedures, parts list and tipping. Put heavier items on lower diagram. Keep your invoice with this shelves. Maximum weight per shelf is manual. Write the invoice number on the 44 lb. Do not allow children to climb inside of the front cover. Keep the manual on the shelves as Shelving Rack and invoice in a safe and dry place for could trip over. Avoid setting up the future reference. Shelving Rack on an uneven surface. Safety Warnings and Precautions WARNING: When using this product, basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment. Read all instructions before assembling this product! 1. Keep work area clean. Cluttered areas invite injuries. 7. The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Unpacking When unpacking, make sure the parts listed in the parts list at 2. Use eye protection. Always wear the end of this manual are included. ANSI-approved impact safety goggles If any parts are missing or broken, when assembling this product. please call Harbor Freight Tools at the 3. Stay alert. Watch what you are doing, number on the cover of this manual. use common sense. Do not assemble this product when you are tired. 4. Check for damaged parts. Before using this product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for loose REV 07a SKU 91883 For technical questions, please call 1-800-444-3353. Page 2 Top Pole Covers (1) Top Pole Covers (1) Bottom Shelf (3) with Stand Feet (4). Figure 1 Stand Feet (4) Supporting Poles (2) Between Shelves (3). Assembly Instructions 1. Attach each Shelf (3) with the Supporting Poles (2) as shown in Figure 1. It is recommended that you start assembling bottom shelves first and work upward. 2. On the bottom Shelf (3), push in the four Stand Feet (4). See Figure 1. Stand Shelf Rack upright. Tap on the Top Pole Covers (1) in the holes in the top Shelf (3) for a finished look. Check to see that the Shelf Rack is level. CAUTION! Distribute weight evenly on shelves. Each shelf has a capacity of 44 lb. maximum. Place Shelf Rack on a smooth, hard, level surface. PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto. SKU 91883 For technical questions, please call 1-800-444-3353. Page 3 Parts List and Diagram 3 1 2 Part Description 1 Top Pole Cover 2 Supporting Pole 3 Shelf 4 Stand Qty. 4 12 4 4 4 Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. This warranty is expressly in lieu of all other warranties, express or implied, including the warranties of merchantability and fitness. SKU 91883 To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 Camarillo, CA 93011 • (800) 444-3353 For technical questions, please call 1-800-444-3353. Page 4
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42 Instance ID : uuid:7d75c474-f0e7-4beb-abdb-4a1e0e430b38 Document ID : adobe:docid:indd:ac49fff6-788e-11df-a25b-b8f5026dd47e Rendition Class : proof:pdf Derived From Instance ID : 303f075a-780d-11df-8ea9-f12058229371 Derived From Document ID : adobe:docid:indd:303f0759-780d-11df-8ea9-f12058229371 Manifest Link Form : ReferenceStream Manifest Placed X Resolution : 72.00 Manifest Placed Y Resolution : 72.00 Manifest Placed Resolution Unit : Inches Manifest Reference Instance ID : uuid:B7F104FA058ADF11B04C9DCF905D9B7E Create Date : 2010:07:07 13:29:16-07:00 Modify Date : 2010:07:07 13:29:18-07:00 Metadata Date : 2010:07:07 13:29:18-07:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 4 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools