Harbor Freight 600 Lb Capacity Boat Trailer Product Manual
2015-05-27
: Harbor-Freight Harbor-Freight-600-Lb-Capacity-Boat-Trailer-Product-Manual-723681 harbor-freight-600-lb-capacity-boat-trailer-product-manual-723681 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 12
Please add note here
that says:
"NOTE: Some trailer tail
lights will have two
leads instead of three.
They connect to the
harness leads the same
way; brown to brown,
color to color."
Bearing Packing
Instructions
Important
Read and adhere to the following instructions; failure to read
and obey all of the following instructions COMPLETELY will void the
warranty and can result in damage to the trailer, property damage, or
SERIOUS PERSONAL INJURY.
Whenever a hub is disassembled (if a hub on a new unit requires assembly or
a hub is disassembled for maintenance), the following procedure MUST be followed.
1. Using a suitable solvent, thoroughly clean the bearings and the rest of the parts in
the Hub assembly of all grease, dirt, metal shavings, or any other foreign object.
The parts must be cleaned even if they are new or
appear
clean.
2. Allow all pieces to dry completely.
3. Make sure that your hands are thoroughly clean and the bearing packer (not in-
cluded) is also thoroughly clean.
4. Place fresh, clean bearing grease in the packer.
5. With the grease-filled bearing packer in one hand and the bearing in the other, press
the bearing into the grease, forcing the grease inside the slots in the bearing, con-
tinue doing this until every slot in the bearing is completely full of grease.
6. Finish assembling the hub/wheel assembly as explained in this manual, being careful
not to get any dirt or debris on any part of the assembly.
12
