Harbor Freight 600 Lb Heavy Duty Trailer Dolly Product Manual

Manual for the 60533 Heavy Duty Trailer Dolly 60533 600 lb. Heavy Duty Trailer Dolly

: Harbor-Freight Harbor-Freight-600-Lb-Heavy-Duty-Trailer-Dolly-Product-Manual-723677 harbor-freight-600-lb-heavy-duty-trailer-dolly-product-manual-723677 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 4

Page 2 For technical questions, please call 1-800-444-3353. Item 60533

Important Safety Information

1. Study, understand, and follow all

instructions before operating this device.

2. Do not exceed rated capacity.

3. Use only on hard level surface.

4. Before moving a trailer, assure that the

load is centered and coupler secured.

5. No alterations shall be

made to this product.

6. Wear ANSI-approved safety goggles

and heavy-duty work gloves

during assembly and use.

7. Keep clear of trailer’s path while

placing on and removing from dolly,

and while moving.

8. Use as intended only.

Do not use for aircraft purposes.

9. Inspect before every use;

do not use if parts loose or damaged.

10. Be aware of dynamic loading!

Sudden load movement may briefly create

excess load causing product failure.

11. Read trailer owner’s manual and

instruction manual for Tongue Jack

(not included) before use.

12. Do not work under Trailer while on Dolly.

13. Keep area free of spectators and do not

allow anyone on trailer while on Dolly.

14. Use wheel chocks when raising front

of trailer for placement onto Dolly.

15. Assemble only according to instructions.

Improper assembly can create hazards.

16. Keep assembly area clean and well lit.

17. Weight capacity and other product

capabilities apply to properly and

completely assembled product only.

18. Do not assemble when tired

or when under the influence of

alcohol, drugs or medication.

19. This product is not a toy. Do not allow

children to play with or near this item.

20. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this document including all text under subheadings therein

before set up or use of this product.

Assembly

1. Attach V-Support (17), Connector (2),

and Brace (3) to Handle (7) using

three Bolts (10), Washers (8),

Lock Washers (16), and Nuts (11).

2. Attach Connector (2) under Axle Base (1),

using two Bolts (10), Washers (8),

Lock Washers (16), and Nuts (11).

3. Attach Brace (3) to Axle Base (1),

using Bolt (18), Washer (19),

Lock Washer (15), and Nut (12).

4. Slide the Wheels (4) over the ends of

the Axle Base (1) and secure in place

with Washers (6) and Cotter Pins (5).

Bend Cotter Pins into place.

Page 3For technical questions, please call 1-800-444-3353.Item 60533

Operation

1. Check Dolly tire inflation

and correct as needed.

Inflation pressure is marked on tires.

2. Chock trailer wheels to keep them from

rolling. Chocks sold separately.

3. Use a Tongue Jack (sold separately)

to raise the Trailer’s tongue.

4. Place Dolly in position under raised

coupler. Lower coupler slowly onto

Dolly and secure it to Dolly.

5. Use Handle to guide vehicle to location.

Parts List and Diagram

Part Description Qty

1 Axle Base 1

2 Connector 1

3 Brace 1

4 Wheel 2

5 Cotter Pin 2

6 Washer 2

7 Handle 1

8 Washer Ø10 5

Part Description Qty

9 Coupler Ball 1

10 Bolt M10x55 3

11 Nut M10 5

12 Nut M12 1

13 Bolt M18x40 1

14 Lock Washer Ø18 1

15 Lock Washer Ø12 1

16 Lock Washer Ø10 5

Part Description Qty

17 V-Support 1

18 Bolt M12x30 1

19 Flat Washer Ø12 1

20 Handle Grip 2

21 Bolt M10x30 2

22 Washer Ø10 1

22

21

Record Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only,

and are not available individually as replacement parts.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY

DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER

OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE

BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR

THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE

MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS

REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS,

AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF

HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO,

OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free from

defects in materials and workmanship for the period of 90 days from the date of purchase.

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence

or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages

arising from the use of our product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany

the merchandise. If our inspection verifies the defect, we will either repair or replace

the product at our election or we may elect to refund the purchase price if we cannot readily

and quickly provide you with a replacement. We will return repaired products at our expense,

but if we determine there is no defect, or that the defect resulted from causes not within

the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353