Harbor Freight 90374 Users Manual Manual.pmd
90374 90374
90374 to the manual 0030bef5-1bc6-4a64-8e6e-eb5fc9df4c6a
2015-01-25
: Harbor-Freight Harbor-Freight-90374-Users-Manual-209760 harbor-freight-90374-users-manual-209760 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 22
| Download | |
| Open PDF In Browser | View PDF |
18V CORDLESS COMBO PACK Model 90374 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright© 2003 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions, please call 1-800-444-3353. REV 07l PRODUCT SPECIFICATIONS Item Description Electrical Requirements Batter Charger Input: 120 VAC / 60 Hz Battery Output: 18 VDC Battery Charging Time 3 to 5 Hours Drill Specifications 3/8" Keyless / Reversible / Single Speed / 900 RPM Squeeze Trigger / Torque Adjustments: 1 - 8 Oscillating Sander Specifications Triangle Shape / Hook & Loop Attachment 6,000 OPM / Rocker Power Switch Flashlight Specifications Pistol Grip / 0 - 90 Degree Swivel Head / Slider Power Switch Stepped Lens (Clear) / 8 Watt Bulb Jigsaw Specifications 1/2" Stroke / 1,700 SPM / One Speed / Squeeze Trigger Safety Lock / Blade Guard / Angle Adjustable Accessories Rechargeable 18 VDC Battery / Battery Charger Weight 13.40 Pounds SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference. GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS WORK AREA 1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. SKU 90374 PAGE 2 REV 05g, 07l 3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. ELECTRICAL SAFETY 4. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any adapter plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. If the tools should electrically malfunction or break down, grounding provides a low resistance path to carry electricity away from the user. 5. Double insulated tools are equipped with a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way. Double insulation eliminates the need for the three wire grounded power cord and grounded power supply system. 6. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 7. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 8. Do not abuse the Power Cord. Never use the Power Cord to carry the tools or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock. 9. When operating a power tool outside, use an outdoor extension cord marked “W-A” or “W”. These extension cords are rated for outdoor use, and reduce the risk of electric shock. PERSONAL SAFETY 10. Stay alert. Watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. SKU 90374 PAGE 3 11. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 12. Avoid accidental starting. Be sure the Power Switch is off before plugging in. Carrying power tools with your finger on the Power Switch, or plugging in power tools with the Power Switch on, invites accidents. 13. Remove adjusting keys or wrenches before turning the power tool on. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury. 14. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. 15. Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions. TOOL USE AND CARE 16. Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. 17. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 18. Do not use the power tool if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced. 19. Disconnect the Battery from the tool before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. 20. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 21. Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired. SKU 90374 PAGE 4 REV 03j 22. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. 23. Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool may become hazardous when used on another tool. SERVICE 24. Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. 25. When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury. GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualfified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. SKU 90374 PAGE 5 REV 03j DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS 1. Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and complies with the applicable standards of Underwriters Laboratories, Inc., the Canadian Standard Association, and the National Electrical Code. (See Figure B.) 2. Double insulated tools may be used in either of the 120 volt outlets shown in the following illustration. (See Figure B.) FIGURE B EXTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of power and possible tool damage. (See Figure C, below.) 3. The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than a 16 gauge cord. (See Figure C.) 4. If using more than one extension cord to make up the total length, make sure each cord contains at least the minimum wire size required. (See Figure C.) SKU 90374 PAGE 6 REV 03j 5. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the required minimum cord size. (See Figure C.) 6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable for outdoor use. 7. Make sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it repaired by a qualified electrician before using it. 8. Protect your extension cords from sharp objects, excessive heat, and damp or wet areas. RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120 VOLT) NAMEPLATE AMPERES (At Full Load) 0 – 2.0 2.1 – 3.4 3.5 – 5.0 5.1 – 7.0 7.1 – 12.0 12.1 – 16.0 16.1 – 20.0 FIGURE C SKU 90374 EXTENSION CORD LENGTH 25 50 75 Feet Feet Feet 18 18 18 18 18 18 18 18 16 18 16 14 18 14 12 14 12 10 12 10 * Based on limiting the line voltage drop to five volts at 150% of the rated amperes. PAGE 7 100 Feet 18 16 14 12 10 - 150 Feet 16 14 12 12 - SYMBOLOGY Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. V~ A no xxxx/min. Volts Alternating Current Amperes No Load Revolutions per Minute (RPM) SPECIFIC SAFETY RULES 1. Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Combo Pack in areas near flammable chemicals, dusts, and vapors. 2. Maintain labels and nameplates on the Combo Pack. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 3. Ground this product. To comply with the National Electric Code, and to provide additional protection from the risk of electrical shock, the Battery Charger (1B) should only be connected to a 120 volt electrical outlet that is protected by a Ground Fault Circuit Interrupter (GFCI). 4. When using a hand-held power tool, always maintain a firm grip on the tool with both hands. 5. To avoid electrical shock, do not pull or carry the Battery Charger/Charger Base (1B, 1C) by its Power Cord or pull the Power Cord around sharp corners or edges. Do not unplug the Battery Charger by pulling on the Power Cord. Keep the Power Cord away from heated surfaces. 6. Never leave the Battery Charger (1B) unattended when it is plugged into an electrical outlet. Make sure to unplug the Battery Charger from its outlet before leaving. SKU 90374 PAGE 8 REV 04f 7. Use eye protection. Always wear ANSI approved safety impact eye goggles when working with these products. 8. Proper Battery Care: Battery (1A) leakage may occur under extreme usage or temperature conditions. If Battery fluid comes in contact with skin, wash with soap and water and rinse with lemon juice and vinegar. If the fluid comes in contact with eyes, flush with water for several minutes and contact a doctor immediately. Never burn the Battery, as it can explode in a fire. Do not attempt to charge a leaking Battery. Contact local solid waste authorities for instructions on correct disposal or recycling of the Battery. 9. Do not allow children to handle or play with these products. 10. Store idle equipment. When not in use, tools and equipment should be stored in a dry location to inhibit rust. Always lock up tools and equipment, and keep out of reach of children. 11. Do not use these products if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgement or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to use these products. 12. Industrial applications must follow OSHA requirements. 13. Maintain this product with care. Keep these products clean and dry for better and safer performance. 14. Maintenance: For your safety, service and maintenance should be performed regularly by a qualified technician. 15. Check for damaged parts. Before using these products, carefully check that they will operate properly and perform their intended function. Check for damaged parts and any other conditions that may affect the safe operation of these products. Replace or repair damaged or worn parts immediately. 16. Replacement parts and accessories: When servicing, use only identical replacement parts. Only use accessories intended for use with this product. 17. Use the right tool or attachment for the right job. Do not attempt to force a small tool or attachment to do the work of a larger industrial tool or attachment. There are certain applications for which these products were designed. They will do the job better and more safely at the rate for which they were intended. Do not modify these products, and do not use these products for a purpose for which they were not intended. SKU 90374 PAGE 9 18. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities, contain chemicals known (to the State of California) to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: lead from lead-based paints, crystalline silica from bricks and cement or other masonry products, arsenic and chromium from chemically treated lumber. Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code 25249.5, et seq.) 19. WARNING! People with pacemakers should consult their physician(s) before using this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker. 20. WARNING! The warnings, precautions, and instructions discussed in this manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. UNPACKING When unpacking, check to make sure all the parts shown on the Parts Lists on pages 18, 19, 20, and 21 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. ASSEMBLY AND OPERATING INSTRUCTIONS NOTE: For additional information regarding the parts mentioned in the following pages, refer to the Assembly Diagrams on pages 18, 19, 20, and 22. 1. NOTE: The Battery (1A) requires charging. The first charge requires 5 hours charge time prior to using a cordless tool. (See Figure D, next page.) 2. The Battery (1A) should only be re-charged when the Flashlight Bulb (7C) begins to dim or a cordless tool begins to run slowly. (See Figure D.) 3. When the Battery (1A) requires re-charging, a 3 to 5 hour charge allows the tool to operate at full power. Do not re-charge the Battery longer than 5 hours, as damage to the Battery and/or Flashlight or cordless tool will occur. (See Figure D.) SKU 90374 PAGE 10 4. To charge the Battery (1A), plug the Battery Charger’s Plug (1B) into the Charging Base (1C). Plug the Battery (1A) into the Charging Base (1C). Charging room temperature: 50° F - 104° F. Then, plug the Battery Charger into the nearest 120 Volt, grounded, electrical outlet. (See Figure D). 5. A Charging Indicator Light on the Charging Base (1C) will illuminate to show that charging is taking place. NOTE: The Battery Charger (1B) will not automatically turn off when the Battery is fully charged, and the Charging Indicator Light will remain on until the Battery Charger is disconnected from the electrical outlet. Recharging the Battery more than 5 hours can cause damage to the battery cells. (See Figure D.) 6. While charging, the Battery (1A), Battery Charger (1B), and/or Charger Base (1C) may become warm to the touch. This is normal, and does not indicate a problem. (See Figure D.) 7. Once the Battery (1A) is fully charged, disconnect the Battery Charger (1B) from the electrical outlet. Then, disconnect the Battery from the Charging Base. (See Figure D.) BATTERY CHARGER (1B) Note: Always switch to a fresh battery when tool performance begins to diminish. Severe heat is most destructive to a battery; the more heat generated, the faster the battery loses power. A battery that gets too hot can be permanently damaged. Never over-discharge a battery by using the tool even after tool performance is decreasing. Never attempt to discharge a tool’s battery by continuing to pull the tool trigger. When tool performance begins to diminish, stop the tool, re-charge the battery and use the fresh battery for optimal performance. CHARGING INDICATOR LIGHT PLUG BATTERY CHARGER ONLY INTO A 120 VOLT, GROUNDED, ELECTRICAL OUTLET. CHARGING BASE (1C) CHARGER PLUG FIGURE D To Operate The Flashlight: 1. Insert the fully charged Battery (1A) in the Flashlight’s Handle, and make sure the Spring on the Battery snaps into place on the Handle. (See Figure E, next page.) 2. Slide the Switch Button (4C) on the Handle forward to turn “ON”. (See Figure E.) SKU 90374 PAGE 11 REV 03j, 04f, 07k 3. To turn off the Flashlight, slide the Switch Button (4C) to its OFF position. (See Figure E.) 4. To change the Bulb (7C), unscrew the Light Head Cap (9C) and remove the Lens (8C). Remove the old Bulb by pushing in on the Bulb while turning it clockwise. Insert a new Bulb by aligning the tabs on the Bulb with the slots in the Bulb socket. Push in on the new Bulb while turning it counterclockwise. Re-attach the Lens and Light Head Cap. (See Figure E.) BATTERY (1A) FLASHLIGHT HANDLE LIGHT HEAD CAP (9C) SWITCH BUTTON (4C) LENS (8C) BULB (7C) FIGURE E To Operate The Sander: 1. WARNING! The Cordless Sander is not designed for wet sanding. 2. Make sure the Battery (1A) is disconnected from the Sander prior to attaching sand paper (not included) to the tool. 3. To attach sand paper to the Sander, use the hook and loop mechanism on its Sand Paper Pad (17D). (See Figure F, next page.) 4. Whenever possible, secure the workpiece that is to be sanded in a vise or with clamps. 5. Insert the fully charged Battery (1A) in the Sander’s Handle, and make sure the Spring on the Battery snaps into place on the Handle. (See Figure F.) 6. To turn on the Sander, squeeze the Switch (3D). NOTE: Always grip the Sander firmly with both hands when the tool is running. SKU 90374 PAGE 12 7. Lightly apply the oscillating Sand Paper Pad (17D) to the workpiece surface, and begin sanding the workpiece by moving the tool forward and backward with (parallel to) the grain of the workpiece. 8. Once the sanding job is completed, release pressure on the Switch (3D) to turn off the Sander. (See Figure F.) 9. IMPORTANT: If, during the sanding process it becomes necessary to replace worn sand paper with new sand paper, make sure to turn off the Sander and disonnect the Battery (1A). Re-install new sand paper and then re-attach the Battery. (See Figure F.) SAND PAPER PAD (17D) SANDER HANDLE SWITCH (3D) SANDER HANDLE BATTERY (1A) BATTERY (1A) FIGURE F To Operate The Jigsaw: 1. Make sure the Battery (1A) is disconnected from the Jigsaw prior to attaching the Saw Blade (16E) to the tool. 2. To attach the Saw Blade (16E) to the Jigsaw, use the Hex Key (24E) to loosen the two Hex Socket Screws (14E). (See Figure G, next page.) 3. Insert the shank of the Saw Blade (16E) upward into the Blade Holder (15E) with its saw teeth pointing to the front of the tool. Then, re-tighten the two Hex Socket Screws (14E) to secure the Saw Blade in place. (See Figure G.) 4. If desired, the angle of a cut may be adjusted. To do so, loosen the Hex Socket Screw (14E) located on the underside of the Sander. Tilt the Base Plate (19) to the desired angle. Then, re-tighten the Hex Socket Screw. (See Figure G.) SKU 90374 PAGE 13 5. Whenever possible, secure the workpiece that is to be cut in a vise or with clamps. 6. Insert the fully charged Battery (1A) in the Jigsaw’s Handle, and make sure the Spring on the Battery snaps into place on the Handle. (See Figure G.) 7. The Jigsaw is equipped with a Safety Button that prevents accidental starting. To turn on the Jigsaw, depress the Safety Button and then squeeze the Switch (5E). NOTE: Always grip the Jigsaw firmly with both hands when the tool is running. (See Figure G.) 8. WARNING! Always keep hands and fingers away from the moving Saw Blade (16E). (See Figure G.) 9. Lightly feed the Saw Blade (16E) into the workpiece and apply light, gradual, forward, pressure on the Jigsaw to move the tool along the area to be cut. 10. Do not attempt to back out of an uncompleted cut while the Jigsaw is running. If necessary, release pressure on the Switch (5E) to turn off the Jigsaw. Then, remove the tool from the workpiece. (See Figure G.) 11. IMPORTANT: If, during the cutting process it becomes necessary to replace a bent or broken Saw Blade (16E) with a new Saw Blade, or re-adjust the angle of the Base Plate (19E), make sure to turn off the Jigsaw and disonnect the Battery (1A). Re-install a new Saw Blade, or re-adjust the Base Plate, and then re-attach the Battery. (See Figure G.) HEX KEY (24E) HEX SOCKET SCREW (14E) HEX SOCKET SCREW (14E) SAW BLADE (16E) HEX KEY (24E) HANDLE BASE PLATE (19E) FIGURE G SKU 90374 PAGE 14 BATTERY (1A) SAFETY BUTTON SWITCH (5E) To Operate The Drill: 1. WARNING! Always make sure the Trigger (3F) of the Cordless Drill is in its “OFF” position, the Battery (1A) is removed from the Drill, and the Battery Charger (1B) is unplugged from its electrical outlet prior to making any adjustments to the tool. (See Figure H.) 2. The Chuck (12F): Accepts up to 3/8” diameter drill bits (not included) and the Screwdriver Bit (31F). To install a drill bit, hold the Chuck Sleeve firmly in place and turn the Chuck (12F) counterclockwise. Insert the shank of a drill bit all the way into the Chuck. While holding the Chuck Sleeve in place, turn the Chuck clockwise to lock the drill bit in place. (See Figure H.) 3. The Trigger (3F): The Trigger is operated manually simply by squeezing the Trigger to turn on the Drill and releasing pressure on the Trigger to turn off the Drill. (See Figure H.) 4. The Rotation Button (33F): The Rotation Button allows you to change the rotational direction of the Drill. For a clockwise rotation, move the Rotation Button to the right. For a counterclockwise rotation, move the Rotation Button to the left. (See Figure H.) 5. The Torque Setting Ring (8F): The Torque Setting Ring allows you to select up to eight different driving torque settings, depending on the job required. To change the driving torque, simply turn the Torque Setting Ring to the desired setting. (See Figure D.) TORQUE SETTING RING (8F) CHUCK SLEEVE CHUCK (12F) ROTATION BUTTON (33F) DRILL HANDLE TRIGGER (3F) BATTERY (1A) FIGURE H SKU 90374 PAGE 15 6. Whenever possible, secure the workpiece that is to be drilled in a vise or with clamps. 7. When installing drill bits or the Screwdriver Bit (31F), make sure the Battery (1A) is removed from the Drill to avoid accidental starting. Then, insert and lock in p l a c e a drill bit or Screwdriver Bit in the Chuck (12F) of the Drill. (See Figure H.) 8. Insert the fully charged Battery (1A) in the Drill’s Handle, and make sure the Spring on the Battery snaps into place on the Handle. (See Figure H.) 9. Lubricate the cutting tip of the drill bit with cutting oil when drilling iron or steel. Use a coolant when drilling non-ferrous metals such as copper, brass, or aluminum. 10. When drilling in light gauge metal or wood, use a wooden block to back up the material to prevent damage to the workpiece. 11. Mark the center of the hole to be drilled with a center punch to give a drill bit a start and to prevent it from “walking”. 12. To turn on the Drill, squeeze the Trigger (3F). NOTE: Always grip the Drill firmly with both hands when the tool is running. (See Figure H.) 13. Drill only as deep as necessary. Do not drill deeper than necessary into walls or other areas where you cannot identify any possible hazards behind the drilling surface. 14. To reduce jamming as the drill bit breaks through the workpiece, decrease the drilling pressure when the point of the drill bit breaks through the workpiece. 15. When you have drilled the hole, remove the drill bit from the hole while the Drill is still running. This prevents the drill bit from getting caught in the hole and causing damage. 16. Release the Trigger (3F) to stop the Drill. Then, remove the Battery (1A) and drill bit from the Drill. INSPECTION, MAINTENANCE, AND CLEANING 1. WARNING! Always remove the Battery Pack (1A) from a tool and unplug the Battery Charger (1B) from its electrical outlet before performing any inspection, maintenance, or cleaning on the tool. SKU 90374 PAGE 16 2. BEFORE EACH USE, inspect the general condition of the tools. Check for misalignment or binding of moving parts, cracked or broken parts, damaged wiring, and any other condition that may affect their safe operation. If abnormal noise or vibration occurs with a tool, have the problem corrected before further use. Do not use damaged equipment. 3. TO CLEAN, use a clean, damp, cloth to clean the outer surfaces of the Combo Pack tools and accessories. A mild detergent may be used. Do not use solvents. Do not immerse any of the tools, Battery, or Battery Charger in water. 4. WHEN STORING, always keep the Combo Pack tools and accessories in a clean, dry location. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTUER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 90374 PAGE 17 REV 07l PARTS LIST - FLASHLIGHT Part # Description Part # Description 1A Batter y 6C Locate Spring 1B Batter y Charger 7C Bulb 1C Charger Base 8C Lens 2C Right Enclosure 9C Light Head Cap 3C Switch 10C Left Enclosure 4C Switch Button 11C Screw 5C Light Head Cover ASSEMBLY DIAGRAM - FLASHLIGHT 5C 6C 11C 4C 3C 10C 7C 8C 9C 2C 1B Note: 1C Charger Base not shown (see page 11, Figure D) 1A NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as original or replacement parts. SKU 90374 PAGE 18 REV 04g PARTS LIST - SANDER Part # Description Part # Description 1A Batter y 9D Gear 1B Batter y Charger 10D Bearning 1C Charger Base 11D Shaft 1D Enclosure 12D Oscillator 2D Enclosure 13D Bearing 3D Switch 14D Suppor t 4D Pole Plate 15D Base Plate 6D Motor 16D Tapping Screw 7D Gear 17D Sand Paper Pad 8D Bearing 18D Tapping Screw ASSEMBLY DIAGRAM - SANDER 2D 3D 1D 4D 18D 6D 7D 8D 9D 10D 11D 14D Note: 1C Charger Base not shown 12D 1A 1B 15D 13D 17D 16D NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as original or replacement parts. SKU 90374 PAGE 19 REV 04g PARTS LIST - JIGSAW Part # Description Part # Description 1A Battery 12E Slide Bar 1B Battery Charger 13E Screw 1C Charger Base 14E Hex Socket Screw 1E Enclosure 15E Blade Holder 2E Guard 16E Saw Blade 4E Pole Plate 17E Slide Sleeve 5E Switch 18E Block 6E Excentral Gear 19E Base Plate 7E Suppor t Bracket 20E Roller Suppor t 8E Motor 21E Spring Washer 9E Enclosure 22E Washer 10E Tapping Screw 23E Nut 11E Self-Oiled Bearing 24E Hex Key ASSEMBLY DIAGRAM - JIGSAW 1A 2E 9E 8E 4E 7E 10E 1E 5E 18E 6E 11E 12E 21E Note: 1C Charger Base not shown 13E 1B 22E 15E 16E 23E 19E 17E 14E 14E 20E 24E NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as original or replacement parts. SKU 90374 PAGE 20 REV 04g PARTS LIST - DRILL Part # Description Part # Description 1A Batter y 17F Small Ball Bearings 1B Batter y Charger 18F Governor Box 1C Charging Base 19F Shaft Coat 1F Self Tapping Screw 20F Spindle 2F Right Enclosure 21F Gear Ring 3F Trigger Switch Assy. 22F Planetar y Gear 5F Ring 23F Planetar y Bracket 6F Spring 24F Planetar y Gear 7F Inner Threaded Ring 25F Washer 8F Torque Setting Ring 26F Self Tapping Screw 9F Torque Positioning Spring 27F Motor Flange 10F Spring Holder 28F Self Tapping Screw 11F Self Tapping Screw 29F Motor 12F Chuck 30F Left Enclosure 13F Chuck Screw 31F Screwdriver Bit 14F Ball Bearings 32F Bit Clip 15F Fixing Ring 33F Rotation Button 16F Small Ring NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as original or replacement parts. SKU 90374 PAGE 21 REV 04f ASSEMBLY DIAGRAM - DRILL 32F 31F 30F 33F 29F 2F 28F 27F 1F 26F 25F 24F 21F 3F 20F 23F 22F 19F 18F 17F 16F 15F 14F 1B 5F 6F 1A 7F 8F 1C 9F 10F 11F 12F 13F NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as original or replacement parts. SKU 90374 PAGE 22 REV 04f
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Format : application/pdf Creator : rcanson Description : 90374 Manual.pmd Title : 90374 Manual.pmd Create Date : 2007:12:31 07:46:52-08:00 Creator Tool : Adobe PageMaker 6.52 Modify Date : 2007:12:31 07:46:52-08:00 Producer : Acrobat Distiller 8.1.0 (Windows) Keywords : Document ID : uuid:1957a837-7653-47c9-bf14-74ffd46c8ef2 Instance ID : uuid:ef4151d8-2082-4679-af59-050fdfa06523 Page Count : 22 Subject : 90374 Manual.pmd Author : rcansonEXIF Metadata provided by EXIF.tools