Harbor Freight 96451 Users Manual
96451 to the manual 450a4ee7-5d00-43cb-8f24-cfc455043837
2015-01-25
: Harbor-Freight Harbor-Freight-96451-Users-Manual-210155 harbor-freight-96451-users-manual-210155 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 7
| Download | |
| Open PDF In Browser | View PDF |
Infrared thermometer Model 96451 Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. Save this manual. Copyright© 2007 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. For technical questions or replacement parts, please call 1-800-444-3353. Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. WARNING! Read all instructions Failure to follow all instructions listed below may result in serious injury. Work area safety 1. Keep children and bystanders away while operating. Distractions can cause you to lose control. 2. Keep work area clean and well lit. Cluttered or dark areas invite accidents. Personal safety 1. Wear ANSI-approved safety goggles. Use eye protection. Never point laser directly into the eyes of a person or animal. Do not point laser on, or indirectly off, reflective surfaces such as stainless steel or aluminum. 2. Stay alert and use common sense when operating. Do not use when tired or under the influence of drugs, alcohol or medication. Product use and care 1. This product is not a toy. Keep it out of reach of children. 2. Use the product in accordance with these instructions and in the manner intended for the particular type of product, taking into account the working conditions and the work to be performed. Use of the product for operations different from those intended could result in a hazardous situation. 3. Not for medical use. 4. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. Service 1. Have product serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. SKU 96451 For technical questions, please call 1-800-444-3353. Page 2. Maintain labels and nameplates on the product. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Save these instructions. Specifications Measurement Range Accuracy -4° F to 968° F (-20° C to 520° C) ± 4° F below 212° F ± 2% reading above 212° F Response Time 500 mSec Distance to Spot Size 8:1 Battery Requirements 9V AVOID EXPOSURE – Laser light is emitted from this aperture. DANGER LASER LIght AVOID DIREct EyE EXPOSURE Max. Output: <5 mW, Wavelength: 630-660 nm Class IIIa laser ProduCt this product complies with 21 CFr 1040.10 and 1040.11 CeN-teCH, 3491 Mission oaks Blvd., Camarillo, Ca, usa, 93011 WARNINg to prevent serious injury: 1. do not use for medical purposes. 2. Wear aNsI-approved safety goggles when replacing battery. date:_____, _________________DO NOt REMOVE. Unpacking When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Operating Instructions Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: Do not expose this product to strong electromagnetic fields, such as those generated by an arc welder, induction heater, etc. Allow the unit 30 minutes to adjust, before use, when introduced to significant temperature changes. 1. Remove the battery cover and insert a 9V battery into the unit, paying attention to polarity. Replace battery cover. 2. Push the “Laser ON/OFF” button to activate unit. 3. Pull and hold down trigger to turn unit on. When the Trigger is released, the unit will beep and display the last temperature measured for 15 seconds. 4. To locate a “hot spot” move laser up and down in an area to see temperature variance. 5. Non-reflective surfaces will yield a more accurate reading than reflective surfaces. Duct tape (not included) can be applied to reflective surfaces in order REV 07j SKU 96451 For technical questions, please call 1-800-444-3353. Page to get a better measurement. Allow sufficient time for the tape to match the temperature of the surface it is applied to before trying to get a reading. 6. The maximum range for the Infrared Thermometer is about 8 feet. The object being tested should be larger than the size calculated by the field of view diagram, below Field of View 7. Push the °F/°C button to toggle from Fahrenheit to Celsius. 8. Clean the lens with dry compressed air and wipe the rest of the unit down with a soft, damp cloth, then store the product indoors out of children’s reach. Maintenance And Servicing Caution Damaged products can fail, causing personal injury. Do not use a damaged product. If abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, maintenance, and lubrication 1. BEFORE EACH USE, inspect the general condition of the product. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation. 2. After Use, clean external surfaces of the product with clean, moist cloth. SKU 96451 For technical questions, please call 1-800-444-3353. Page PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this manual as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto. PARTS LIST Part Description Qty Part Description Qty 1 Handle Case 1 14 Receiving Housing 1 2 Left Cover 1 15 LCD 1 3 Right Cover 1 16 Laser Set 1 4 Battery Cover 1 17 Conductive Rubber 1 5 Opening Hood 1 18 Screw 8 6 Trigger 1 19 Tape 1 7 Receiving Tube 1 20 Battery Connector 2 8 Backlight Board 1 21 Spring 1 9 Right Button 1 22 Black Rubber 2 10 Left Button 1 23 Sponge Mat 1 11 Aluminum Receiving Tube 1 24 Battery (not included) 1 12 Aluminum Lens Tube 1 25 Panel Label 1 13 Sensor Lens 1 26 PCB 1 SKU 96451 For technical questions, please call 1-800-444-3353. Page ASSEMBLY DIAGRAM Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 96451 For technical questions, please call 1-800-444-3353. Page Limited 1 Year warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the date of purchase (90 days if used by a professional contractor or if used as rental equipment). This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. This warranty is expressly in lieu of all other warranties, express or implied, including the warranties of merchantability and fitness. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353 SKU 96451 For technical questions, please call 1-800-444-3353. Page
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : 3.1.1-111 Instance ID : uuid:919fe218-db20-466d-aa8b-37c43b730b23 Document ID : adobe:docid:indd:0f34be34-394a-11dc-b5e3-f37d7406ca97 Rendition Class : proof:pdf Derived From Instance ID : 0f34be33-394a-11dc-b5e3-f37d7406ca97 Derived From Document ID : adobe:docid:indd:527e3312-3936-11dc-b5e3-f37d7406ca97 Manifest Link Form : DirectStream, DirectStream, DirectStream, DirectStream, DirectStream Manifest Placed X Resolution : 2000.00, 180.00, 72.00, 300.00, 300.00 Manifest Placed Y Resolution : 2000.00, 180.00, 72.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches Manifest Reference Document ID : adobe:docid:photoshop:352082c6-7aee-11d9-9808-841ee90a91f0, uuid:D2B744A61350DC119047AD850263F96C, uuid:ecc40e7f-4572-46bb-90ca-fe450fb2db33, uuid:7E44B54B2750DC11853E883FAB23024F, uuid:463F38E83050DC11B7C3E547692A729C Manifest Reference Instance ID : uuid:F2E4BB0E1450DC119047AD850263F96C, uuid:7F44B54B2750DC11853E883FAB23024F, uuid:473F38E83050DC11B7C3E547692A729C Create Date : 2007:10:15 08:29:07-07:00 Modify Date : 2007:10:15 08:29:15-07:00 Metadata Date : 2007:10:15 08:29:15-07:00 Creator Tool : Adobe InDesign CS2 (4.0.5) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8583 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Page Count : 7 Creator : Adobe InDesign CS2 (4.0.5)EXIF Metadata provided by EXIF.tools