Harbor Freight Air Vacuum Pump With R134A And R12 Connectors Product Manual
Manual for the 96677 Air Vacuum Pump with R134A and R12 Connectors 96677 Vacuum Pump - AC Vacuum Pump w/ R134A & R12 Connectors
2015-05-27
: Harbor-Freight Harbor-Freight-Air-Vacuum-Pump-With-R134A-And-R12-Connectors-Product-Manual-723642 harbor-freight-air-vacuum-pump-with-r134a-and-r12-connectors-product-manual-723642 harbor-freight pdf
Open the PDF directly: View PDF .
Page Count: 7
AIR VACUUM PUMP WITH
R134A & R12/22
Model
96677
SET UP AND OPERATING INSTRUCTIONS
To prevent explosion, serious injury, and death:
Service of air conditioning systems must be done
only by trained and experienced technician to avoid
Technicians opening refrigeration circuit in
automotive air conditioning systems MUST be
procedures in compliance with section 609 of Clean
For additional information regarding ozone depletion
and air conditioning service regulations, visit EPA’s
•
•
Distributed exclusively by Harbor Freight Tools®.
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright© 2007 by Harbor Freight Tools®
manual or any artwork contained herein may be reproduced in any shape or form
For technical questions or replacement parts, please call 1-800-444-3353.
Page 2SKU 96677 For technical questions, please call 1-800-444-3353.
SAVE THIS MANUAL
Keep this manual for the safety warnings and precautions, assembly, operating,
the back of the manual near the assembly diagram (or month and year of purchase if
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
re, and/or serious injury. The term “pneumatic tool” in all of the warnings
SAVE THESE INSTRUCTIONS
Work area safety
Cluttered or dark areas invite accidents.
Keep children and bystanders away while operating a pneumatic tool.
Distractions can cause you to lose control.
Personal safety
Stay alert, watch what you are doing and use common sense when operating
A moment of inattention while
operating pneumatic tools may result in serious personal injury.
Use safety equipment. Always wear eye protection. Safety equipment
such as dust mask, work gloves, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal
injuries.
Loose clothes, jewelry or long
hair can be caught in moving parts.
If devices are provided for the connection of chemical vapor extraction and
Use of
these devices can reduce vapor-related hazards.
Pneumatic tool use and care
The correct pneumatic tool will do the job better and safer at the
rate for which it was designed.
Disconnect the tool from the air source before making any adjustments,
changing accessories, or storing.
Page 3SKU 96677 For technical questions, please call 1-800-444-3353.
Store idle pneumatic tools out of the reach of children and do not allow
persons unfamiliar with the pneumatic tool or these instructions to
operate it. Pneumatic tools are dangerous in the hands of untrained
users.
Many accidents are caused by poorly
maintained tools.
Use the pneumatic tool in accordance with these instructions and in the
manner intended for the particular type of tool, taking into account the working
Use of the pneumatic tool for
operations different from those intended could result in a hazardous situation.
Service
This will ensure that the safety of the tool is
maintained
SPECIFIC SAFETY RULES
Do not leave the tool unattended when it is plugged into a pneumatic outlet,
known to the State of California to cause birth defects (or other reproductive
et seq.)
NEVER use this product to vent refrigerants into the air. It is illegal to do
so, harmful to the environment, and poses a serious health risk.
The warnings, precautions, and instructions discussed in this instruction manual
Page 4SKU 96677 For technical questions, please call 1-800-444-3353.
understood by the operator that common sense and caution are factors which
SAVE THESE INSTRUCTIONS.
SPECIFICATIONS
Air Consumption
Vacuum Capacity
Air Inlet
Vacuum Ports
UNPACKING
parts are missing or broken, please call Harbor Freight Tools at the number shown on the
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
General operating instructions
NOTE:
Warning.
Before beginning work with this tool, safely capture refrigerants using an
SKU 96677 For technical questions, please call 1-800-444-3353.
this Air Vacuum Pump and run for 10 minutes to further raise the vacuum level in
Attach an air pressure hose (not included) to the Air Fitting either by threading it
Allow the pump to draw vacuum on the system for approximately 10 minutes to
The gauge (not included) should show negative pressure and maintain that
MAINTENANCE AND SERVICING
Unplug the tool from the air outlet before performing any
inspection, maintenance, or cleaning procedures.
Damaged equipment can fail, causing serious personal
injury. Do not use damaged equipment. If abnormal noise or
vibration occurs, have the problem corrected before further
use.
Cleaning, maintenance, and lubrication
BEFORE EACH USE,
screws, cracked or broken parts, and any other condition that may affect its safe
AFTER USE,
WARNINGWARNING
Page 6SKU 96677 For technical questions, please call 1-800-444-3353.
PLEASE READ THE FOLLOWING CAREFULLY
PARTS LIST & ASSEMBLY DIAGRAM
Part Description Qty
1 Cover 1
2 Housing 1
3 Cushion 4
4 Aluminum Block 1
Tube M10 1
6 1
7 1
8 1
9 Air Fitting 1
10 1
11 1
Record Product’s Serial Number Here:
Note:
Note: Some parts are listed and shown for illustration purposes only, and are not
Page 7SKU 96677 For technical questions, please call 1-800-444-3353.
LIMITED 90 DAY WARRANTY
quality and durability standards, and warrants to the original purchaser that this product
is free from defects in materials and workmanship for the period of 90 days from the date
abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity,
the exclusion or limitation of incidental or consequential damages, so the above limitation
To take advantage of this warranty, the product or part must be returned to us with
repair or replace the product at our election or we may elect to refund the purchase price
products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353