Harbor Freight Digital Photo Sensor Tachometer Product Manual
Manual for the 66632 Digital Photo Sensor Tachometer 66632 Digital Photo Sensor Tachometer
2015-05-27
: Harbor-Freight Harbor-Freight-Digital-Photo-Sensor-Tachometer-Product-Manual-723535 harbor-freight-digital-photo-sensor-tachometer-product-manual-723535 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Digital Photo Sensor Tachometer Item 66632 INSTRUCTIONS AND PRECAUTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Manual Revised 11g When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1‑800‑444‑3353 as soon as possible. Copyright© 2009 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions, please call 1‑800‑444‑3353. Specifications Display LCD 5 Digits RPM Range 6 - 99999 RPM Accuracy ± 0.05% +1 RPM Power Source (4) ‘AA’ Batteries or 6VDC (neither included) Operating Environment 32° - 104° F, < 85% Humidity Includes Reflective Tape Set Up Before first use, remove clear protective covering from Display. Battery Installation Note: Install batteries before use and replace the batteries when the Low Battery Indicator (see Figure C) appears. 1. Remove Screw and Battery Cover on back of Tachometer. Important Safety Information 1. When in use, this tool is near rotating parts. Do not touch rotating parts. Do not wear loose clothing when working with rotating parts. Contain hair, jewelry and any item that may become entangled in rotating part. 2. This product is not a toy. Do not allow children to play with or near this item. 3. Position batteries in proper polarity and do not install batteries of different types, charge levels, or capacities together. 4. Use as intended only. 5. Inspect before every use; do not use if parts are loose or damaged. 6. Wear ANSI‑approved safety goggles when working. Figure A: Battery Compartment 2. Install 4 ‘AA’ batteries in battery compartment, matching polarity markings inside battery case. 3. Replace Battery Cover and Screw. Do not overtighten. Note: This tool may be used with a 6VDC power adapter instead. 7. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Page 2 For technical questions, please call 1-800-444-3353. SKU 66632 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. 1. Cut a 3/4″ length of reflective tape (included), peel off the backing and attach the reflective tape to the object to be measured. Note: The longer the piece of reflective tape, the easier it is to make the measurement. However, the tape must not wrap all the way around the object. 2. Point the Tachometer at the reflective tape on the object, holding the tool approximately 2″ to 8″ away. 3. Start the object turning. 4. Press and hold the Test Button, keeping the tachometer perpendicular to the reflective tape surface. Reflective Tape Note: If the reading fails to appear, adjust the Tachometer’s angle so that it is perpendicular to the reflective tape on the object and/or adjust the distance between the Tachometer and the reflective tape. MAX MIN PHOTO RPM Figure C: Display Table A: Symbol Key Low Battery Indicator; batteries are low and need replacing MAX Maximum reading is displayed MIN Minimum reading is displayed PHOTO Photo-electricity mode symbol RPM Revolutions per minute (RPM) After the test button is released, the maximum, minimum and last measurements are stored. To access previous measurements, press and release the Memory Button repeatedly to cycle through the measurements. The indicators above the digits will appear as described in Figure C. Spinning Shaft Figure B: Taking Measurement 5. After several seconds, a reading will appear on the Display. When the reading is stable, or almost stable, note the reading on the Display and then release the Test Button. SKU 66632 For technical questions, please call 1-800-444-3353. Page 3 Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Replacement parts are not available for this item. Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00 Instance ID : uuid:b065a718-8f96-aa44-985c-77855f892aaf Document ID : xmp.did:FF7F1174072068118083938105DA3C8D Original Document ID : adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:FE7F1174072068118083938105DA3C8D Derived From Document ID : adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Derived From Original Document ID: adobe:docid:indd:3d8405b6-7ee1-11df-9488-aa083f618b49 Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:7EA511693D20681180839C64BA4E4F1D, xmp.iid:7FA511693D20681180839C64BA4E4F1D, xmp.iid:FA7F1174072068118083938105DA3C8D, xmp.iid:FB7F1174072068118083938105DA3C8D, xmp.iid:FC7F1174072068118083938105DA3C8D, xmp.iid:FD7F1174072068118083938105DA3C8D, xmp.iid:FE7F1174072068118083938105DA3C8D, xmp.iid:FF7F1174072068118083938105DA3C8D, xmp.iid:00801174072068118083938105DA3C8D, xmp.iid:CC8D1DA6122068118083938105DA3C8D, xmp.iid:780470B31820681180839D99F3060A4F, xmp.iid:790470B31820681180839D99F3060A4F, xmp.iid:7A0470B31820681180839D99F3060A4F, xmp.iid:FA8CAC432720681180839D99F3060A4F, xmp.iid:FB8CAC432720681180839D99F3060A4F, xmp.iid:A253E29F3A2068118C14FB08BA0B5CAA, xmp.iid:FC237DE23B2068118A6DB31E22D7FAB4, xmp.iid:FD237DE23B2068118A6DB31E22D7FAB4, xmp.iid:FF237DE23B2068118A6DB31E22D7FAB4, xmp.iid:01247DE23B2068118A6DB31E22D7FAB4, xmp.iid:66A50331442068118083F358FB389F89, xmp.iid:09801174072068118C14DA6AC7FA4257, xmp.iid:32BA3BD1162068118C14DA6AC7FA4257, xmp.iid:A458EAB22B2068118C14DA6AC7FA4257, xmp.iid:2A15040A332068118C14DA6AC7FA4257, xmp.iid:2E15040A332068118C14DA6AC7FA4257, xmp.iid:309A47A7072068118083855F2609F763, xmp.iid:349A47A7072068118083855F2609F763, xmp.iid:DB16DDBA102068118C14BF48F36ACEE8, xmp.iid:DF16DDBA102068118C14BF48F36ACEE8, xmp.iid:9C80D8621B2068118A6DD67F94C5BF3B, xmp.iid:A080D8621B2068118A6DD67F94C5BF3B, xmp.iid:A380D8621B2068118A6DD67F94C5BF3B, xmp.iid:2172872F1E2068118A6DD67F94C5BF3B, xmp.iid:2672872F1E2068118A6DD67F94C5BF3B, xmp.iid:2872872F1E2068118A6DD67F94C5BF3B, xmp.iid:5A919ED5202068118A6DD67F94C5BF3B, xmp.iid:5D919ED5202068118A6DD67F94C5BF3B, xmp.iid:60919ED5202068118A6DD67F94C5BF3B, xmp.iid:63919ED5202068118A6DD67F94C5BF3B, xmp.iid:91C8C590212068118A6DD67F94C5BF3B History When : 2010:09:29 16:09:49-07:00, 2010:09:29 16:09:49-07:00, 2010:12:20 14:55:43-08:00, 2010:12:20 14:55:43-08:00, 2010:12:20 14:59:50-08:00, 2010:12:20 15:07:13-08:00, 2010:12:20 15:07:23-08:00, 2010:12:20 15:07:23-08:00, 2010:12:20 15:09:32-08:00, 2010:12:20 15:09:32-08:00, 2010:12:22 10:18:45-08:00, 2010:12:22 10:18:52-08:00, 2010:12:22 10:18:52-08:00, 2010:12:22 12:01:07-08:00, 2010:12:22 12:01:07-08:00, 2011:01:04 14:25:20-08:00, 2011:02:17 14:48:20-08:00, 2011:02:17 14:48:20-08:00, 2011:02:17 14:56:37-08:00, 2011:02:17 14:57:30-08:00, 2011:03:16 15:39:09-07:00, 2011:03:17 09:44:08-07:00, 2011:03:17 11:20:18-07:00, 2011:03:17 13:21:21-07:00, 2011:03:17 14:13:54-07:00, 2011:03:17 15:06:55-07:00, 2011:03:21 08:48:32-07:00, 2011:03:21 08:49:25-07:00, 2011:06:29 09:27:44-07:00, 2011:06:29 09:28:50-07:00, 2011:07:22 10:39:46-07:00, 2011:07:22 10:40:54-07:00, 2011:07:22 10:59:32-07:00, 2011:07:22 10:59:48-07:00, 2011:07:22 11:02:21-07:00, 2011:07:22 11:15:52-07:00, 2011:07:22 11:18:46-07:00, 2011:07:22 11:22:11-07:00, 2011:07:22 11:23:14-07:00, 2011:07:22 11:23:54-07:00, 2011:07:22 11:24-07:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata Create Date : 2011:07:22 11:24:05-07:00 Modify Date : 2011:07:22 11:24:06-07:00 Metadata Date : 2011:07:22 11:24:06-07:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Doc Change Count : 3037 Format : application/pdf Producer : Adobe PDF Library 9.9 Trapped : False Page Count : 4 Creator : Adobe InDesign CS5 (7.0.4)EXIF Metadata provided by EXIF.tools