Harbor Freight Electric Start Propane Torch Product Manual 91061

Harbor-Freight-91061-Users-Manual-209559 harbor-freight-91061-users-manual-209559

Manual for the 91061 Electric Start Propane Torch 91061 Electric Start Propane Torch

91061 91061

91061 to the manual 5d04f99d-ca67-439d-b119-f3f95c6a3bab

: Harbor-Freight Harbor-Freight-Electric-Start-Propane-Torch-Product-Manual-724262 harbor-freight-electric-start-propane-torch-product-manual-724262 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 8

BLOW TORCH

WITH PIEZO START

MODEL 91061

ASSEMBLY AND OPERATING INSTRUCTIONS

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our Web site at http//www.harborfreight.com

Copyright 2003 by Harbor Freight Tools®. All rights reserved. No portion of this

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

For technical questions, please call 1-800-444-3353.

®

PRODUCT SPECIFICATIONS

SAVE THIS MANUAL

You will need this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures, parts list and as-

sembly diagram. Keep your invoice with this manual. Write the invoice number

on the inside of the front cover. Keep this manual and invoice in a safe and dry

place for future reference.

GENERAL SAFETY WARNINGS AND PRECAUTIONS

1. Keep work area clean and dry. Cluttered, damp, or wet work areas invite

injuries.

2. Keep children away from work area. Do not allow children to handle this

product.

3. Store idle equipment. When not in use, tools and equipment should be stored

in a dry location to inhibit rust. Always lock up tools and equipment, and keep out

of reach of children.

4. Do not use this product if under the influence of alcohol or drugs. Read

warning labels on prescriptions to determine if your judgement or reflexes

SKU 91061 PAGE 2

Item Description

Product Compatibility D e signed for use with Standard

16.4 Oz. (465 g) (1.02 Lb.) Propane Bottles.

Heat Output 3200° Fahrenheit.

Features Electronic Start.

Adjustable Gas Flow Thumb W heel.

3-1/4” Long Brass Valve.

General Application For Sweating and Thawing Pipes,

Soldering, and Burning Weeds; (example:

Weeds on the side of a driveway; only use

in a well controlled safe environment).

Always have a fire extinguisher present.

Overall Length 9-5/8”.

Weight 0.85 Pounds.

6. Dress safely. Do not wear loose clothing or jewelry, as they can become caught

in moving parts or come in contact with open flames. Wear a protective hair

covering to prevent long hair from becoming caught in moving parts or coming in

contact with open flames.

7. Do not overreach. Keep proper footing and balance at all times to prevent

tripping, falling, back injury, etc.

8. Industrial applications must follow OSHA requirements.

9. Stay alert. Watch what you are doing at all times. Use common sense. Do not

use this product when you are tired or distracted from the job at hand.

10. Check for damaged parts. Before using this product, carefully check that it will

operate properly and perform its intended function. Check for damaged parts

and any other conditions that may affect the operation of this product. Replace

or repair damaged or worn parts immediately.

11. Replacement parts and accessories: When servicing, use only identical re-

placement parts. Only use accessories intended for use with this product. Ap-

proved accessories are available from Harbor Freight Tools.

12. Maintain this product with care. Keep this product clean and dry for better and

safer performance. For your safety, service and maintenance should be per-

formed regularly by a qualified technician.

13. Use the right tool for the job. Do not attempt to force a small tool to do the

work of a larger industrial tool. There are certain applications for which this tool

was designed. It will do the job better and more safely at the capacity for which it

was intended. Do not modify this tool, and do not use this tool for a purpose for

which it was not intended.

14. WARNING! The warnings, precautions, and instructions discussed in this

manual cannot cover all possible conditions and situations that may occur. The

operator must understand that common sense and caution are factors, which

cannot be built into this product, but must be supplied by the operator.

SKU 91061 PAGE 3

are impaired while taking drugs. If there is any doubt, do not attempt to use this

product.

5. Use eye and hand protection. Wear ANSI approved safety impact eye goggles

and flame retardant gloves and clothing when using this product. ANSI approved

safety impact eye goggles and flame retardant gloves are available from Harbor

Freight Tools. Always wear heavyduty leather work shoes.

SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS

1. Maintain a safe working environment. Keep the work area well lit. Make sure

there is adequate surrounding work space. Always keep the area free of obstruc-

tions, grease, oil, trash, and other debris. Do not use the Blow Torch in areas

near flammable chemicals, dusts, and vapors. Be aware of wind blown sparks.

Do not use the Blow Torch around or near buildings and structures.

2. The Blow Torch is for outdoor use only. Use the Blow Torch only in well

ventilated areas. Inhalation of propane fumes may result in carbon monoxide

poisoning, injury and/or death.

3. Before each use, always check all propane connections and joints to make

sure no leaks are present.

4. If while using the Blow Torch you notice the odor of propane, immediately

shut off the propane fueling the Torch. Extinguish all open flames, and care-

fully check for leaks by using soapy water. Never use a flame to check for leaks.

If the odor continues, do not use the Torch. Call your local propane supplier for

assistance.

5. Propane fuel is extremely flammable and under pressure. Do not store

propane fuel in temperatures exceeding 120 degrees fahrenheit. Keep the

propane cylinder upright when using and storing. Never puncture or set fire to an

empty propane cylinder. Contact local solid waste authorities for instructions on

correct disposal or recycling of a propane cylinder.

6. Do not aim the Blow Torch’s Burner (1) at yourself, others, or animals.

Keep spectators clear of the work area.

7. Maintain a firm grip with both hands on the Blow Torch while in use.

8. Never reach across the Blow Torch while in use. Be aware that parts of the

Blow Torch become extremely hot during operation.

9. Always allow sufficient time for the Blow Torch to completely cool down

before storing. Do not store flammable liquids or materials in the area

surrounding the Blow Torch.

10. Maintain labels and nameplates on the Blow Torch. These carry important

information. If unreadable or missing, contact Harbor Freight Tools for a replace-

ment.

SKU 91061 PAGE 4

22. WARNING! The brass components of this product contain lead, a chemical

known to the State of California to cause birth defects (or other reproductive

harm).

(California Health & Safety Code 25249.5, et seq.)

23. WARNING! This product, when used with propane fuel, produces chemicals

known to the State of California to cause cancer and birth defects (or other repro-

SKU 91061 PAGE 5

11. Never use gasoline, kerosene, or other highly volatile fluids as a starter as

they can explode.

12. Dress safely. Do not wear loose clothing such as hanging shirt tails and coats.

Wear a protective hair covering to keep long hair away from heat and flames.

Use ANSI approved safety impact goggles and flame retardant gloves and

clothing to avoid burns.

13. Never leave the Blow Torch unattended once it is lit.

14. Keep a fire extinguisher handy. Always keep a commercial fire extinguisher

nearby the Blow Torch in case of accidental fire.

15. Do not clean the Blow Torch with cleaners that are combustible or cor-

rosive.

16. Do not paint any part of the Blow Torch.

17. Make sure the Thumb Wheel (7) is turned to its “OFF” position and the pro-

pane tank (not included) is removed when the Blow Torch is not in use.

18. Do not use the Blow Torch in the rain.

19. Never smoke while using the Blow Torch. Make sure all surrounding flames

are extinguished.

20. Never use a propane tank if it shows signs of: Dents, corrosion, gouges,

bulges, fire damage, leakage, excessive rust, or any other form of visual external

damage.

21. When work is complete, only set the Blow Torch on a non-flammable

surface like concrete, until the tool is completely cool to the touch.

UNPACKING

When unpacking, check to make sure all the parts shown on the Parts List (page 8) are

included. If any parts are missing or broken, please call Harbor Freight Tools at the

number shown on the cover of this manual as soon as possible.

ASSEMBLY AND OPERATING INSTRUCTIONS

NOTE: For additional references to the parts listed in the following pages, refer to the

Assembly Diagram (page 8).

1. Make sure the Thumb Wheel (7) is turned completely clockwise to the “OFF”

position. (See Figure A.)

2. Screw the 16.4 ounce propane bottle (not included) tightly onto the Cylinder

Connector (11). Do not remove the propane bottle until it is completely empty.

3. The Thumb Wheel (7) regulates the propane gas flow. Release the propane gas

flow by slightly turning the Hand Wheel counterclockwise. (See Figure A.)

4. Make sure the Burner (1) is pointing in a safe direction and, with the Blow Torch

in a vertical position, push the Piezo Button (16) to activate the electric start. It

may be necessary to push the Piezo Button several times to activate the flame.

(See Figure A.)

5. Adjust the flame to the desired level by turning the Thumb Wheel (7)

counterclockwise. (See Figure A.)

6. NOTE: The lit Blow Torch should operate with a blue flame with a small yellow

tip. If necessary, adjust the Thumb Wheel (7) if there is sputtering or popping.

(See Figure A.)

PRODUCT FEATURES

1. The Blow Torch is ideal for sweating and thawing pipes, soldering, and

burning weeds in a well controlled safe environment. In addition, the Blow Torch

easily attaches to standard 16.4 Oz. (465 g) (1.02 Lb.) propane tanks.

SKU 91061 PAGE 6

THUMB WHEEL (7)

PIEZO BUTTON (16)

BURNER (1)

CYLINDER CONNECTOR (11)

FIGURE A

7. To extinguish the flame, close the Thumb Wheel (7) by turning it completely clock-

wise. (See Figure A.)

8. Allow sufficient time for the Blow Torch to completely cool. Then, store the Blow

Torch in a safe location and out of reach of children.

SKU 91061 PAGE 7

INSPECTION, MAINTENANCE, AND CLEANING

1. Before each use, inspect the general condition of the Blow Torch. Check the

Blow Torch for loose connections and joints, cracked, bent, or broken parts,

damaged propane bottle, and any other condition that may affect the safe opera-

tion of the Blow Torch. If a problem occurs, have the problem corrected before

further use. Do not use damaged equipment.

2. When cleaning, use only water and a mild detergent. Do not use cleaners that

are combustible or corrosive.

3. When storing, always allow sufficient time for the Blow Torch to completely cool

down before storing. Do not store flammable liquids or materials in the area

surrounding the Blow Torch. Make sure the Blow Torch’s Tumb Wheel (7) is in its

“OFF” position.

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND

ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE

MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF

ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE

PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.

IN FACT, THE MANUFACTUER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL

REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND

LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR

REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF

REPLACEMENT PARTS THERETO.

PARTS LIST

SKU 91061 PAGE 8

NOTE: Some parts are listed and shown for illustration purposes only, and are not

available individually as replacement parts.

ASSEMBLY DIAGRAM

Part # Description

1 Burner (020 Piezo)

2 Gas-Air Mixer (014 x 40)

3 Nozzle (00.28)

4 Handle

5 Body Tap

6 Nut Key 14 Needle Stop

7 Thumb Wheel

8 Nut (M4)

9 Needle

10 O-Ring (102)

11 Cylinder Connector

12 O-Ring (108)

13 Gas Intake

14 Gasket (022 x 2.5)

15 Screw, and Nut (M4)

16 Piezo Button

17 Piezo Ignition

18 Copper Coated Electrode

19 Self-Threading Screw (03 x 19)

20 Ceramic Insulated Electrode

21 Clamp