Harbor Freight Handgun Safe Vault Product Manual

: Harbor-Freight Harbor-Freight-Handgun-Safe-Vault-Product-Manual-724014 harbor-freight-handgun-safe-vault-product-manual-724014 harbor-freight pdf

Open the PDF directly: View PDF .
Page Count: 8

Page 2 For technical questions, please call 1-888-866-5797. Item 61581

Specifications

Overall dimensions 11" L x 8-1/8" W x 5-1/2" H

External AC/DC Power Socket size 3.5mm

Factory Code

This gun safe meets the California DOJ requirements.

Important Safety Information

Installation Precautions

1. Verify that installation surface has no hidden

utility lines before drilling or driving screws.

2. Wear ANSI-approved safety

goggles during installation.

3. Install only according to these instructions.

Improper installation can create hazards.

4. Keep installation area clean and well lit.

5. Keep bystanders out of the

area during installation.

6. Do not install when tired or when under the

influence of alcohol, drugs, or medication.

7. Place the Safe on correct surface.

Only use this Safe on a stable,

level, clean and dry surface that is

capable of sustaining the load.

Use Precautions

1. Unload gun completely, including

chamber, before storing.

2. Lock up guns and ammunition

separately out of children’s

reach and out of sight.

3. Even when stored in gun safe,

use gun-lock to disable gun.

4. Separate gun keys from other keys.

5. Leaving gun unsecured may

result in criminal charges.

6. Do not allow children to play

with or near safe. Keep keys and

codes away from children.

7. Keep clear of Door when closing.

8. Position batteries in proper polarity and

do not install batteries of different types,

charge levels, or capacities together.

9. Use as intended only.

10. Inspect before every use; do not use

if parts are loose or damaged.

11. Maintain product labels and nameplates.

These carry important safety information.

If unreadable or missing, contact

Harbor Freight Tools for a replacement.

12. Do not store Keys inside of the Safe.

Place the emergency keys in a location

outside of the safe making sure they are

in a secure location that you can find.

13. Warning: The brass components of

this product contain lead, a chemical

known to the State of California to cause

birth defects (or other reproductive

harm). (California Health & Safety code

§ 25249.5, et seq.)

14. The shelf or wall the Safe is placed on must

support the weight of the Safe and its load.

15. The warnings, cautions, and instructions

discussed in this instruction manual cannot

cover all possible conditions and situations

that may occur. It must be understood by the

operator that common sense and caution

are factors which cannot be built into this

product, but must be supplied by the operator.

16. The Safe is neither water nor fire proof.

NOTE: Harbor Freight Tools is not responsible

for the loss of any property stored within this safe

due to theft, fire, or any other circumstance.

Page 3For technical questions, please call 1-888-866-5797.Item 61581

Installation

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this manual including all text under subheadings therein

before set up or use of this product.

Mounting

1. The mounting location must be able to support

the weight of both the safe and its contents.

2. Remove felt pad from inside of safe.

3. Using the holes in the bottom of the Safe

as a template, lay the Safe in the desired

location and drill all four pilot holes.

4. Once the pilot holes have been drilled, secure

the Safe with the supplied 1-1/2" wood screws.

a. Screw through the holes in the bottom of

the Safe and into the drawer bottom.

b. If the screws included with the Safe are

too long, replace them with the appropriate

length wood screws (not supplied) for

the intended mounting surface.

5. Place the supplied felt pad in the Safe so as to

cover the Safe bottom and mounting screws.

Batteries

1. Remove the cover from the battery

compartment, found on the ceiling of the safe.

2. Insert four AA batteries, taking

note of the proper polarity.

3. Replace the battery cover.

Note: Low battery is indicated by the safe

beeping four times whenever the door is

opened, and by the indicator light flashing red.

4. When low battery is indicated,

change the batteries.

Page 4 For technical questions, please call 1-888-866-5797. Item 61581

Functions

Key

Hole

External

AC/DC

Power

Socket

Indicator

Light

Mounting

Holes

Keypad

Figure A

Sound

Switch

Programming

Button

LED Light Battery

Compartment

Figure B: Underside of Key Pad (inside safe)

Page 5For technical questions, please call 1-888-866-5797.Item 61581

Operation

Read the ENTIRE IMPORTANT SAFETY INFORMATION section

at the beginning of this manual including all text under subheadings therein

before set up or use of this product.

To prevent serious injury and DEATH from accidental firearm discharge:

1. Unload gun completely, including

chamber, before storing.

2. Lock up guns and ammunition

separately out of children’s

reach and out of sight.

3. Even when stored in gun safe,

use gun-lock to disable gun.

4. Separate gun keys from other keys.

5. Leaving gun unsecured may

result in criminal charges.

Open Safe Using Emergency Keys

1. Insert the Key into the Key Hole

(see Figure A), and turn.

2. The door will fall open.

3. Close the door by pushing up

and in, until a click is heard.

WARNING: Do not store your keys in the safe.

Set the Combination Code

Note: The safe will accept only 5-digit codes.

1. Open the door using the key or factory

code ( ).

2. Press the programming button (see Figure B).

3. Enter the new 5-digit code.

4. When the safe has accepted the new code,

two beeps will be heard and the indicator

light (See Figure A) will flash twice.

Note: If no feedback is given, the

code has not been accepted.

Entering the Wrong Combination

1. If the wrong combination is entered,

the safe will beep three times.

2. If the wrong combination is entered four

consecutive times, the safe will go into

Lock-Down Mode for three minutes.

Note: During this time, the safe will beep, the

LED light (See Figure B) will flash, and the

keypad (see Figure A) will be disabled. The safe

may still be opened with the key override.

3. After three minutes, the safe will

resume normal operation.

Light and Sound

1. The LED interior light will automatically

illuminate for 30 seconds when the

door is opened with the combination

code. It will then shut off.

2. To turn the light back on, re-

enter the combination code.

3. To turn the audible beeps on or off, toggle

the Sound Switch. See Figure B.

Page 6 For technical questions, please call 1-888-866-5797. Item 61581

Maintenance and Servicing

Procedures not specifically explained in this manual must be performed only by a

qualified technician.

1. BEFORE EACH USE, inspect the general

condition of the Safe. Check for loose

screws, misalignment or binding of moving

parts, cracked or broken parts, damaged

electrical wiring, and any other condition

that may affect its safe operation.

2. PERIODICALLY clean external surfaces

of the Safe with a clean cloth.

3. To extend battery life, the safe may be

plugged into a power outlet through an

external 6 volt power adaptor with a standard

3.5mm tip (not included). To do so, use the

external AC/DC power socket (Figure A).

Page 7For technical questions, please call 1-888-866-5797.Item 61581

Record Serial Number Here:

Note: If product has no serial number, record

month and year of purchase instead.

Note: Replacement parts are not

available for this item.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality

and durability standards, and warrants to the original purchaser that this product is free from

defects in materials and workmanship for the period of 90 days from the date of purchase.

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence

or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,

injuries to persons or property, or for incidental, contingent, special or consequential damages

arising from the use of our product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation of exclusion may not apply to you.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany

the merchandise. If our inspection verifies the defect, we will either repair or replace

the product at our election or we may elect to refund the purchase price if we cannot readily

and quickly provide you with a replacement. We will return repaired products at our expense,

but if we determine there is no defect, or that the defect resulted from causes not within

the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also

have other rights which vary from state to state.

3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797