Harbor Freight Jumbo Helping Hands With Led Lights Product Manual
Harbor-Freight-65779-Owner-S-Manual harbor-freight-65779-owner-s-manual
Manual for the 65779 Jumbo Helping Hands with LED Lights 65779 Jumbo Helping Hands with LED Lights
2015-05-27
: Harbor-Freight Harbor-Freight-Jumbo-Helping-Hands-With-Led-Lights-Product-Manual-723983 harbor-freight-jumbo-helping-hands-with-led-lights-product-manual-723983 harbor-freight pdf
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
HELPING HANDS WITH LED LIGHT 65779 Instructions and precautions Distributed exclusively by Harbor Freight Tools®. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Save these instructions. Read all precautions and instructions. Copyright© 2008 by Harbor Freight Tools®. All rights reserved. No portion of this document or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this document may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included. For technical questions or replacement parts, please call 1-800-444-3353. Specifications Magnification 1. Magnifying Lens - 2x 2. Zoom Lens - 6x Unpacking When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this document as soon as possible. Important SAFETY Information Assembly Precautions 1. Assemble only according to these instructions. Improper assembly can create hazards. 2. Wear ANSI-approved safety goggles during assembly. 3. Keep assembly area clean and well lit. 4. Keep bystanders out of the area during assembly. 5. Do not assemble when tired or when under the influence of drugs or medication. Use Precautions 1. This product is not a toy. Do not allow children to play with this item. 2. Use for intended purpose(s) only. 3. Inspect before use; do not use if parts are loose or damaged. 4. Maintain product labels and nameplates. These carry important safety information. If unreadable or missing, contact Harbor Freight Tools for a replacement. Assembly Instructions Read the entire Important Safety Information section at the beginning of this document including all text under subheadings therein before set up or use of this product. Assembly 1. 2. 3. 4. 5. 6. 7. Pop the back of the Battery Compartment Cover up, and remove. Insert the three AAA batteries supplied; the correct polarity is shown in the compartment. When batteries are installed, close cover. Insert the Coil Spring Soldering Iron Holder (9) into the hole on the right side of Base (1) and tighten the Lock Screw. (See Fig. 1.) Insert the Vertical Rod (2) into the Base and tighten the Lock Screw. (See Fig. 1.) Slide the Horizontal Rod (3) and Bracket down onto the Vertical Rod. a. Slide down about half way and tighten the knob. This position can be adjusted later. (See Fig. 1.) Slide the Magnifying Lens (4) and Bracket onto the Vertical Rod (2) and tighten knob. (See Fig. 1.) Adjust as required. Lighting 8. The LED lights are not designed to be replaced. PLEASE READ THE FOLLOWING CAREFULLY The manufacturer and/or distributor has provided the parts list and assembly diagram in this document as a reference tool only. Neither the manufacturer or distributor makes any representation or warranty of any kind to the buyer that he or she is qualified to make any repairs to the product, or that he or she is qualified to replace any parts of the product. In fact, the manufacturer and/or distributor expressly states that all repairs and parts replacements should be undertaken by certified and licensed technicians, and not by the buyer. The buyer assumes all risk and liability arising out of his or her repairs to the original product or replacement parts thereto, or arising out of his or her installation of replacement parts thereto. Parts List & assembly diagram Part 1 2 3 4 5 6 7 8 9 Description Qty. Cast Iron Base Vertical Rod Horizontal Rod Magnifying Lens Zoom Lens LED Bulb (Beneath Battery Compartment) AAA Batteries LED Light Switch Coil Spring Soldering Iron Holder 1 1 1 1 1 2 3 1 1 Note: Replacement parts are not available. Battery Compartment Cover Lock Knob Zoom Lens (5) Vertical Rod (2) Magnifying Lens (4) LED Light Switch (8) Lock Knob Alligator Clips Coil Spring Soldering Iron Holder (9) Cast Iron Base w/Sponge Tray (1) Horizontal Rod (3) Fig 1 Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 65779 For technical questions, please call 1-800-444-3353. Page 2
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42 Instance ID : uuid:4b2b68f9-7ac2-4909-8883-dc3874af3f35 Document ID : adobe:docid:indd:d15c0891-04be-11dd-ac7d-982a8728b9c6 Rendition Class : proof:pdf Derived From Instance ID : 4ee4432b-04ba-11dd-ac7d-982a8728b9c6 Derived From Document ID : adobe:docid:indd:4ee4432a-04ba-11dd-ac7d-982a8728b9c6 Manifest Link Form : DirectStream, DirectStream Manifest Placed X Resolution : 150.00, 150.00 Manifest Placed Y Resolution : 150.00, 150.00 Manifest Placed Resolution Unit : Inches, Inches Manifest Reference Instance ID : uuid:928C65354D6DDD11B4E49F44D2B49302, uuid:BE2E54434C6DDD11B4E49F44D2B49302 Manifest Reference Document ID : uuid:918C65354D6DDD11B4E49F44D2B49302, uuid:0F9647A2436DDD11B4E49F44D2B49302 Create Date : 2008:10:10 10:26:38-07:00 Modify Date : 2008:10:10 10:26:39-07:00 Metadata Date : 2008:10:10 10:26:39-07:00 Creator Tool : Adobe InDesign CS3 (5.0.3) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 10621 bytes, use -b option to extract) Format : application/pdf Producer : Adobe PDF Library 8.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CS3 (5.0.3)EXIF Metadata provided by EXIF.tools